Categories

Best Dual Shaft Motor Dc

CHANS TYC-40 Electric Synchronous Motor DC 12V 5RPM Shaft 35mm With Power Supply Input 100V-240V Output DC 12V For Ornamental Fiber Optic Christmas Tree

  • 【Description:】It's a combination of an DC 12V motor and a input AC 100V-240V and output DC 12V power supply. Easy to install and easy to operate.....
  • 【TYC-40 DC 12V Synchronous Motor Parameter:】 Voltage: 12V DC； Speed: 5r/min ； Shaft Length: 35mm； Shaft Screw Thread Inner Diameter:....
  • 【DC Power Supply Parameter:】 Input: AC 100-240V； Output: DC 12V ； Output current: 1500mA； Frequency: 60Hz； Power: 15W； Wire Length:....
  • 【Attention:】 1.The power adapter is an DC power supply,NOT suitable for AC motor. 2.Too high voltage will burn the motor and power supply.....
  • 【Package Include: 】 1*TYC-40 12V DC 5RPM 35mm Synchronous motor； 1*DC Power Supply； 1*Module.
Check Stock

Jutagoss 1Pcs Miniature Gear Motor GA12-N20 DC Gear Motor 6V 1000RPM Encoder Speed Velocity Measurement Mini Car Balance Motor

  • 【High Quality】-The gear motor is made of metal gear.
  • Good toughness impact resistance the quality of the bearing and the service life of the gear motor are improved extremely durable.
  • 【Feature】-You can also easily mount a wheel on the motor's output shaft.
  • 【Application】-Great replacement for the rusty or damaged DC geared motor.
  • Widely used in Intelligent remote Control car.
  • 【Package】-1 Pcs GA12-N20 DC Geared Motor with Encoder Test wire.
Check Stock

High Speed Brushless DC Motor Kits 2000W 60V Electric Gokart Motor 4250RPM Rated Mid Motors with Controller Pedal Throttle for E-Scooter E-Bike Dirt Bike Motorcycle

  • Fundamental Parameters: This brushless go kart motor is powerful and efficient.Input Voltage: 72V DC, Output Power: 3000W, Rated Current: 43A, Rated Speed: 4900 RPM, Maximum Speed: 5800 RPM, Sprocket: T8F-11T, Maximum Current: 65A. Rated Torque: 6 N.m / 849.67 oz.in, Shaft Diameter: 0.47'' / 12 mm, Length (no Shaft): 5.31'' / 135 mm, Length (with Shaft): 6.3'' / 160 mm. Package includes: 1 x Brushless DC Motor, 1 x Controller, 1 x Multi-purpose Wrench, 1 x L-Shaped Wrench, 1 x Screw Set..
  • 3000W Brushless Motor: The dc electric go kart brushless motor adopts a 100% copper core for low noise operation and excellent speed regulating performance. The high-precision rotor features high-tech components, a clean finish for water resistance, and high working efficiency. Get ready to leave the competition in the dust..
  • Sturdy Aluminum Construction: The electric brushless dc motor kit features an aluminum alloy shell that resists heat, cold, and deformation, ensuring it will not rust easily. This dc electric motor is a forward and backward rotation motor so that you can switch rotation gears effortlessly..
  • Speed Controller Included: This dc electric motor brushless comes with a controller to provide speed control at a desirable range, speed adjustment method: Pot....
Check Stock

Sntieecr 6 Set 131 PCS DC Motors Kit Mini Electric Motor 1.5-3V 15000RPM with 66 PCS Plastic Gears Shaft Propeller Bulbs Buzzer Sounder Science Experiment Set for Kid DIY STEM Engineering Project

  • SCIENCE MOTOR KIT: Comes with 6 x DC Motor, 6 x Battery Holder Case, 6 x Rocker Switch, 6 x Motor Mounting Bracket, 12 x Electronic Wires(3.92"), 1 x....
  • COLORFUL SHAFT PROPELLERS: 12 Pieces 2 style different colors shaft propellers, 6 pieces 4 Vanes shaft propellers, 6 pieces 3 Vanes shaft propellers....
  • Mounting Hole Distance(center to center): 15mm/ 0.59".
  • Shaft Size: 10 x 2.0mm/ 0.39" x 0.08"(L x D).
  • WIDE APPLICATIONS: This complete electric motor kit good for kids experiment and explore basic electrical simple circuits. It can also be used in....
  • WARNING: Suitable for 8+ years. Be careful of scald caused by short circuit. Do not mix old and new batteries. Do not mix alkaline, standard....
Check Stock

Fielect 2Pcs 6V DC Motor with Wire 7000RPM Micro Motor Electric Motor Round Shaft for RC Boat Toys Model DIY Hobby

  • 【Dimension】 - Shaft Diameter: 3.17mm/0.12".
  • 【Features】- DC micro motor is durable, stable performance, shockproof, wear-resistant, and high precision. It is an excellent substitute for rusty or damaged DC motors on the machine.
  • 【Material】 - The electric motor is made of metal, and the output shaft is made of high-hardness copper, which has good toughness and impact resistance.
  • 【Application】 - Micro motors are used in electronic game machine printers, rear-view mirrors, headlight beam level adjusters, car toys, DIY hand drills, electronic equipment, etc.
Check Stock

uxcell DC 3V 5RPM Micro Speed Reduction Motor Mini Gear Box Motor with 2 Terminals for RC Car Robot Model DIY Engine Toy

  • Small speed reducing motor with metal gearbox increases torque..
  • Micro gearbox motor for DIY RC Hobby, vehicles, drones, planes and more..
  • Mini dc gear motor is small and lightweight to easily mount a wheel on the motor's output shaft or copter blade..
Check Stock

12/24V 30W Permanent Magnet Motor Hollow Shaft DC Motor Electric Brushed Motor Speed Adjustable CW/CCW (12V 3000RPM)

  • [Hollow shaft design]:It is a hollow shaft DC motor, the fishing line can pass through the hollow shaft, perfect for making fish float..
  • [Safe to use]:This high speed motor drives super smooth, low noise, safe to use..
  • [High performance]:This permanent magnet DC motor can support CW/CCW rotation, features high speed of 3000/6000rpm and large moment of force..
  • [Application]:Can be applied in lawn mower, polishing machine, cutting machine, electric drill, cotton candy machine, small generator, winding machine, bag cutting machine..
  • [Energy saving]:Low heat and low loss, save energy..
Check Stock

6 Set DC Motors Kit, Mini Electric Hobby Motor 3V -12V 25000 RPM Strong Magnetic with Shaft Propeller, 2 x AA Battery Holder,9V Battery Clip Connector,Plastic Wheels for DIY Science Projects

  • Pay attention: Please read the instructions or pictures carefully, use the correct circuit diagram to avoid short circuit, short circuit will produce high temperature and Causing accessory damage.
  • colour:Red & Blue & Yellow&Green&Clear(Random Color).
  • High torque Strong magnetic Brushed Electric 130 MOTOR, can be used for Science Educational models, DIY STEM toys, etc.. It is recommended to use a 3V battery drive to avoid high-speed operation affecting the motor life..
  • Package including:6pcs DC motor,6pcs 9V Battery Clip Connector,6pcs 2 x AA Battery Holder,6pcs motor mounting bracket,6pcs boat rocker switches,12pcs x electronic wire(25cm),8pcs Plastic wheels，4pcs 2*100mm shaft,4pcs 4 vanes propeller,2pcs 3 vanes propeller and 40cmΦ3 Heat shrink tube.
Check Stock

Kohree High Torque DC Motor, 12V 60 RPM Electric Gear Box 37mm Centric Output Shaft Gearbox Motor

  • Benefiting from high torque and low noise..
  • This motor is solidly constructed and ready to install in numerous applications.DescriptionSpecifications:.
  • 1 x Mini 12V DC 60 RPM High Torque Gear Box Electric Motor.
Check Stock

CHANCS Mini Electric Motor 775 DC 12V/24V With Drill Chuck and PWM DC Motor Speed Controller

  • ...ontroller, it can be used with a saw blade to become a mini saw..
  • 【The specification of motor:】 Rated Voltage: DC 12V, Unloaded Speed: 10000RPM, Load Speed: 8800RPM. Rated Voltage: DC 24V, Unloaded Speed: 20000RPM, Load Speed: 17600RPM. Starting current: 4-5A Motor Body Diameter: 42mm, Motor Body Length: 66.5mm, Shaft Length: 16mm, Shaft Diameter: 5mm..
  • 【The specification of bracket:】 Length: 50mm, Width: 52mm, Height: 53mm, Mounting hole diameter: 4mm, Thickness of bracket: 3mm..
  • 【The specification of the speed controller:】 Input Voltage: DC 10V-DC 60V (Ultra wide working voltage)； Output voltage: linear under load； Control Power: 0.01-1200W； Rated Current: 10A； Max Current: 20A (Long-term use of 10A, 450W or less, pay attention to keep the module free of heat dissipation conditions.)； PWM Duty Cycle: 0%-100%； PWM Frequency: 25Khz； Product Size(L x W x H): 77*45*28mm；.
  • 【Attention:】 1.About the PWM, please do not connect AC power directly(Such as:110V AC),the input volt of this controller should be DC 9V-60V,otherwise it will be burned out. 2.Make sure the positive and negative connections are correct before powering on the motor speed controller, it will be damaged if connect the supply voltage with wrong polarity..
Check Stock

4 Axis CNC Nema23 Stepper Motor Dual Shaft 425oz-in 3A+FMD2740C Driver 40V 4A+400W 36V Power Supply+USB CNC Breakut Board Controller Kit For CNC Router

  • ♞【Product】4 Axis nema23 stepper motor driver usbcnc controller kit.
  • Wirings: "A+"=Red / "A-"=Green / "B+"=Yellow / "B-"=Blue.
  • ♞【Driver】FMD2740C driver Voltage: DC12-50V.
  • Current: rated maximum output reaches: 4A.
  • Subdivision precision 2 8 16 32 64 128 10 20 optional.
  • ♞【4 Axis USBCNC Breakout Board】USB port,only support USB CNC Software,not fit for Mach3 software.Our parcel include a CD,it include the user manual and USBCNC software.
  • ♞【400W 36V 11A DC Switching power supply】Please flip the side input voltage selector switch,Input: AC110V-120V or AC220V-240V.
  • 【Computer system 】Support Win XP/7/8/10,if you can not get the activation code on Win 10,pls let us know,we will help you to solve it..
Check Stock

CHANCS TYC-50 Synchronous Motor 12V AC 5-6RPM CW/CCW 4W Gear Motor Fan Motor

  • This is a TYC-50 AC 12V 5-6RPM synchronous motor,small power consumption, low noise, small size, light weight, easy to use. The reduction gear is....
  • 【Specification:】 Product Name : Synchronous Motor； Model : TYC-50； Shaft Diameter: 7mm ； Shaft Length: 16mm； Direction :....
  • 【Application:】 Widely used in hand-made, school project, electric fan shake heads, heaters, Christmas tree, prayer cylinders, air conditioners,....
  • 【About custom:】Motor shaft, line length, speed, voltage can be designed according to customer requirements. If you need other models of motor, you....
  • 【Attention:】 The applicable voltage of this motor is AC 12V, using DC power supply, the motor does not work.
Check Stock

3 Axis Stepper Motor CNC Router Kit Nema23 425oz-in 112mm Dual Shaft+CW5045 Driver 4.5A 256 microstep+400W 36V Power Supply CNC Controller Kit for Engraving Lathe Plasma Milling Drilling Machine

  • ♞【Product】3 Axis nema23 stepper motor driver controller kit.
  • ♞【Application】This cnc kit are widely used in engraving machine, printer,....
  • ♞【Stepper Motor】23HS2430B Nema23 57 stepper motor.
  • ♞【Driver】CW5045 driver Voltage: DC 24-50V.
  • Current: rated maximum output reaches: ±4.5A.
  • ♞【5 Axis Breakout Board】5 Axis breakout boad with cables,this breakout board needs to be connected to the parallel port and USB port of the....
  • ♞【Power supply】400W,36V/9.7A switching power supply.
Check Stock