3-Axis 32-bit ARM Based CNC Controller,GRBL 1.1F USB Port CNC Engraving Machine Control Board with Fan Cooling,Support 500W Spindle/NEMA23 Stepper Motor/Laser (A4988+Fan)
- Model:3 Axis GRBL 1.1F USB Port GRBL Control Board.
- Input voltage: 12-24VDC .CNC Router Machine Controller board.
- Compatibility: support 12V/24V laser, TTL/PWM modulation signal, 3P interface and 2P+2P interface.
- support 775 motor, 200W/300W/500W spindle.
- support dual Y-axis use, three-axis and two-axis switching use.
- support X/Y/Z limit switch, Z-axis probe, emergency stop switch.
- Support stepper motor: 12V, within 2A maximum current, within 1.5A recommended. (Stepper motor 42, 57).⚠️Please check the wire sequence when connecting the stepper motor, the wire sequence may be different for different motors, wrong connection may burn the motor and the motherboard..
- Support software：LaserGRBL/Lightburn/Candle(3 axis)/Universal Gcode Sender.
- Tip: Before you connect the motherboard, please carefully check the need to connect the device wire sequence (laser, motor) to prevent a mismatch of wire sequence, burn the device. Customer service 24H online, to provide you with help..
Check StockADIMLab Gantry Pro 3D Printer 24V Power 310x310X410 Build Volume Resume Print Run Out Detection Lattice Glass Platform Modifiable to Upgrade to Auto Leveling&WiFi
- 90% pre-assembled 3d printer, dual Z-axis motors and dual Y-axis tracks, supply eccentric nuts to fasten the X/Y/Z pulleys or carriages, make the....
- Titan direct extruder and dual fans to cool the hot end, make the extruder system more stable and wear resistant. The operation is more convenient....
- Lattice glass is on hot end, make it easy to leveling and first layer stick and get off, the connector for the bed wire will be strong enough to....
- Supply resume print and filament run out detection functions, Customer can upgrade the auto leveling& touch screen& wifi functions by self,....
- ADIMLab Gantry Pro 3d printer includes: ◆The hot bed with Lattice Glass Platform ◆24V15A UL Certified Power supply ◆Titan....
Check StockANNOYTOOLS ARM 32-bit 3-Axis CNC Controller,GRBL 1.1F USB Port CNC Engraving Machine Control Board with Fan Cooling DRV8825 Standalone Driver,Support 500W Spindle/NEMA17/23 Stepper Motor/Laser Module
- Model:3 Axis GRBL 1.1F USB Port GRBL Control Board.
- Input voltage: 12-24VDC .CNC Router Machine Controller board.
- Compatibility: support 12V/24V laser, TTL/PWM modulation signal, 3P interface and 2P+2P interface.
- support 775 motor, 200W/300W/500W spindle.
- support dual Y-axis use, three-axis and two-axis switching use.
- support X/Y/Z limit switch, Z-axis probe, emergency stop switch.
- Support stepper motor: 12V, within 2A maximum current, within 1.5A recommended. (Stepper motor 42, 57).⚠️Please check the wire sequence when connecting the stepper motor, the wire sequence may be different for different motors, wrong connection may burn the motor and the motherboard..
- Support software：LaserGRBL/Lightburn/Candle(3 axis)/Universal Gcode Sender.
- Tip: Before you connect the motherboard, please carefully check the need to connect the device wire sequence (laser, motor) to prevent a mismatch of wire sequence, burn the device. Customer service 24H online, to provide you with help..
Check Stock
SCULPFUN S30 Laser Engraver with Auto Air Assist Pump & Nozzle, Limit Switchs, 5W CNC Laser Cutter, Industrial Grade Accuracy Engraving Machine, 10 Times Longer Laser Service Life
- ...sist motherboard and automatic air pump, which can be turned on/off intelligently(air assist turns off automatically when engraving and turns on automatically when cutting). Save the time and trouble of doing it manually or avoid bad engraving due to mistakes..
- Powerful 5W Dual Laser Output: The S30 laser cutting machine combines 2 high-density, sharp laser beams into 1 to cut 5mm balsa wood and 3mm plywood in 1 pass. With high-pressure airflow from the air-assisted nozzle dramatically increases cutting efficiency, cutting more than 5 times faster than without air assist..
- Higher Precision Engraving & Cutting: S30 series laser engraving machine adopts extremely sturdy 0.005mm high precision linear slide rail X-axis, and a 0.08mm x 0.06mm ultra-fine compressed spot, making it reach industrial grade engraving accuracy. Achieve detailed and realistic engraved images ..
- Smooth Edge & Deeper Cutting: Use air to quickly reduce the surface temperature of the cut object to avoid deformation and discoloration caused by high laser temperature, and powerful airflow to blow away the residue, ensure clean surface and smooth cutt....
Check Stock
SVBONY SV605 Compound Binocular Microscope 80X-1600X,Two-Layer Mechanical Stage Microscope, Microscope for Adults Teens Students, Microscopes with Science Kits, Dual LED Illumination
- ... exploring the fantastic world of the life.
- comfortable long time viewing without eyes fatigue.
- 45-degree vertical inclination to reduce eye and neck strain.
- 360 degree adjustable binocular head comfortably or share the view with someone sitting across the table.
- built-in adjustable LED upper and down dual illumination provides bright.
- can be used simultaneously and independently controlled.
- provide detailed views with true to life colors for translucent specimens.
- power cord and battery dual power supply so you can use this microscope unplugged or not.
- 4x, 10x, 40x objective lenses can give you clear and sharp image in high magnification.
- Spring load objective protect your slides if you are crushing the object into the slide.
- built-in 6 colored filters Improve the quality of your magnified images and saves you from having to stain slides.
- coaxial coarse and fine dual focus guaranteeing fine detailed viewing of your specimen slides.
- easily simple enough for beginners to use.
- this is a great starter kit comes with slides and glass cover....
Check StockOfficial Creality Ender 5 Pro Upgrade 3D Printer with Silent Motherboard Metal Extruder Frame and Capricorn Bowden PTFE Tubing 220 x 220 x 300mm
- Upgraded Metal Print Head Frame: The upgraded metal print head of creality ender 5 pro has better and stronger pressure, which can push the filament....
- Silent Motherboard: Official ender 5 pro has ultra-quiet motherboard, quieter and more precise. The upgraded motherboard has solid filters and....
- Dual Y Axis, Stable Output: Creality ender 5 pro with dual Y-axis control system, synchronous operation, stable output, ensuring high performance and....
- Brand Power Supply: Ender 5 pro built-in brand power supply, which can be heated quickly and safely. The hot bed can be heated to 110°C within 5....
- Resume Print Function: When the power is restored, creality ender 5 pro 3d printer will continue to print from the interruption point..
Check StockLulzBot KT-PR0051NA TAZ Workhorse 3D Printer
- Belt driven Z-axis for fast cycle times and elimination of Z wobble..
- X/Y/Z Backlash Compensation* for 3D printed part accuracy..
- Lightweight tool head design for faster, better looking prints.
- Pre-configured material profiles created by expert in-house technicians..
- Dual Z-axis limit switches for automatic x-axis gantry leveling.
- The industry’s widest array of supported materials with ready-to-print profiles.
Check StockBCZAMD Upgraded 3D Printer Parts Adjustable Y-axis Synchronous Belt Stretch Straighten Tensioner for Ender 3 pro 3D Printer
- 4040 aluminum profile Y-axis synchronous belt stretching fit for Ender 3 pro 3d printer, Please Note: Not fit for Ender 3, Ender 3X, Ender 5.
- Material: SPCC Steel. Kindly Tips: if you received the kit which is not comple, please Do not hesitate, contact us free from your Order ID, we will send you a new replacement..
- Match with 6mm belt, upgrade the tension tensicner to adjust the belt freedom, much better than originak, very practical.
- It comes as a set of Y-axis belt stretch kit, you need to install it by yourself, Reference instruntion please search keywords on Youttube: bczamd ender 3 pro belt tensioner..
- After-sales guarantee: each defective item can be replacement for free or refund. If any question, please feel free to contact or QA us, we will try our best to service you..
Check Stock
【SINRT-232 Relay-Output-Type Tilt Switch】High-Precision Dual-axis Analog (0.05° Accuracy) Security Inclinometer, Anti- Vibration Tilt Angle Alarm Sensor (IP67) for Building/Bridge Monitoring
- 【 Relay-type Analog Inclinometer 】Dual axis Inclination Measuring: X&Y Dual-axis (+- 90 degree), Relay Value Output Type (200HZ Max output rate, normally open and normally closed optional).
- 【 Robust Design 】 Cortex-M0 core processor, highly-integrated MEMS, and Kalman Algorithm combine to deliver measurement accuracy at 0.1 degree(X, Y-axis) even in the dynamic environment, professional for industrial safety monitoring system.
- 【 WITMOTION Advantage 】8-year Professional Attitude Measuring Solution Provider, sensors integrated R&D dynamic fusion algorithm and Kalman Filtering ensuring stable data output and excellent bias stability, low noise level, increasing measurement accuracy.
- 【 Worry-free Support 】12-month warranty, lifetime friendly customer service by WitMotion team. Option 1. The tutorial link is printed on the guiding card inside the package. Option 2. search wit-motion(dot)com and download the complete tutorial. Option 3. contact us if you need any help, support (at) wit-motion (dot) com.
- 【 What You Get 】1 x WitMotion SINRT inclinometer(9-36V RS232 version) + 1 x Evaluation Board + 1 x Welcome guide (USB-UART converter not included ).
Check Stock
SCULPFUN S30 Pro 10W Laser Engraver with Auto Air Assist Pump & Nozzle, Cleaner and Faster Laser Cutter, Higher Accuracy Laser Engraving Machine, 10x Service Life, 36.8"x35.6" Expandable Working Area
- ...t motherboard and automatic air pump, which can be turned on/off intelligently(air assist turns off automatically when engraving and turns on automatically when cutting). Save the time and trouble of doing it manually or avoid bad engraving due to forgetting..
- Powerful 10W Dual Laser Output: The S30 Pro laser cutting machine combines 2 high-density, sharp laser beams into 1 to cut 10mm wood and 5mm black acrylic in 1 pass. Capable of cutting high density materials such as 10mm walnut and 6mm MDF. With high-pressure airflow from the air-assisted nozzle dramatically increases cutting efficiency, cutting more than 5 times faster than without air assist..
- Higher Precision Engraving & Cutting: S30 series laser engraving machine adopts extremely sturdy 0.005mm high precision linear slide rail X-axis, and a 0.08mm x 0.06mm ultra-fine compressed spot, making it reach industrial grade engraving accuracy. Achieve detailed and realistic engraved images ..
- Smooth Edge & Deeper Cutting: Use air to quickly reduce the surface temperature of the cut object to avoid deformation and discoloration caused by high laser temperature, and....
Check StockPimiho Official Creality Ender 5 Pro Business Grade 3D Printer Fully Open Source with Upgrade Silent Mainboard Double Y-axis Control System and Metal Extruder Frame 220x220x300mm
- 【Creality Ender 5 Pro 】Ender 5 Pro With three upgrade Features, V4.2.2 Silent Mainboard, Metal Extruder Frame, Premium PTFE Tube. Solid cube frame....
- 【V4.2.2 Silent Motherboard + Flexible Magnetic Print Bed 】Creality ender 5 pro 3d printer comes with upgraded V4.2.2 silent Mainboard with TMC2208....
- 【Resume printing function + Dual Y-axis Control】Automatically save the print record after power-off, continue printing after power-on, and improve....
- 【More stable printing + More smoothly Feed-in】The dual Y-axis motion control system drives the high-quality stable output of the two-sided timing....
- 【Quality Assurance and After - Sale Service】We have a professional customer service team. We provide the customers a year warranty , parts....
Check Stock
LiFuJunDong 4 Axis USB CNC6040 Router Engraving Machine 3D Milling Machine w/Controller 110V 1.5KW VFD Water-Cooling Router Engraving Machines for Metal, Wood, Glass and Plastic (6040 1.5KW 4AXIS)
- ENGRAVING MACHINE PARAMETERS】 X, Y, Z Working Area: 600(Y)*390（X）*120(Z)mm Outside dimension: 865*680*570mm（L*W*H） Table size: 770（Y）*490（X）mm Lathe structure: 6061/6063 Aluminium alloy Max. Feeding height: ≤100mm Drive unit: X axis---1605 Ball Screws Y axis---1605 Ball Screws Z axis---1204 Ball Screws Sliding unit: X axis---High intensity Chromeplate shaft Y axis---High intensity Chromeplate shaft Z axis---High intensity Chromeplate shaft Stepping motor: 57 two-phase 3A 150N.cm.
- SPINDLE MOTOR-1】 Outside dimension: 65*158mm Material: 304 stainless steel, Copper coil, Pressure cast aluminum pipe water jacket VOLTS, current, power: AC110V, 60Hz, 5A, 1.5 KW VFD Spindle motor: 1.5 KW Water Cooled Spindle speed: 24000 rpm Max working frequency: 400Hz Principal axis collet: ER11collet, Standard configuration :6mm Nut Model: ER11-A Cooling: Water-cooling Speed mode: By adjusting the VFD output voltage and operating frequency from 0-24000RPM.
- SPINDLE MOTOR-2】Lubrication way: lubricated by high grease Repeat accuracy: 0.05mm Spindle precision: radial beat acuities 0.03mm Carving Instructions: G code / TAB files / nc file / NCC files Communication interface: through USB connection with computer Working Speed: 50-1500mm / min (differ....
Check Stock
Panasonic LUMIX G85MK 4K Mirrorless Interchangeable Lens Camera Kit, 12-60mm Lens, Sandisk 170MB/s 64GB, 2 Spare Batteries, Charger, Backpack, Spider Tripod, Filter Kit, and Flash Bundle (7 Items)
- BUNDLE INCLUDES: Panasonic LUMIX G85 4K Mirrorless Camera Kit with G Vario 12-60mm Lens, 64GB SDXC Memory Card, Photo and Video Backpack, Wasabi Power Two Batteries and Charger Set, Digital Slave Flash, 58mm 3-Piece UV, CPL, FLD Filter Kit, and Flexible 12" Spider Tripod.
- 4K PHOTO MODE: With the exclusive LUMIX 4K Ultra HD video pause and export as a 4K Photo mode, you'll never again miss that one shot that perfectly captures a scene.
- 5-AXIS GYRO SENSOR COMPENSATION: A new gyro sensor increases the image stability compensation power of the 5-axis body image stabilization to correct hand-shake for all lenses, including classic lenses not equipped with optical image stabilization.
- DUAL IS EFFECTIVE TO 5 STOPS: LUMIX G85 integrates 5-Axis Dual I.S.2 (Image Stabilizer), combining 5-axis body and 2-axis lens stabilization for more effective handshake correction and compensation for shots up to 5 f-stops. The 5-axis stabilization works in both wide and telephoto photography and motion picture recording, including 4K Video.
Check Stock
