Categories

Best Dual shaft Motors

DJI Mavic 2 Low-Noise Propellers for Mavic 2 Zoom, Mavic 2 Pro Drone Quadcopter Accessory Replacement - Part 13 (Bundle: 2 Pairs)

  • AB forward and reverse propellers，is suitable for motors with shaft diameter of 0.8MM, such as 614,615,716, etc. Please note that 716 has two kinds of motors, one with shaft diameter of 0.8mm and the other with shaft diameter of 1.0 mm. Our mini propeller is only suitable for motors with shaft diameter of 0.8MM, and the propeller blades are 46 mm long..
  • Mini propeller, durable and light，Made of nylon material,Well-made and well-balanced, strong toughness and not easy to break..
  • Quick installation and disassembly without using other tools. When installing, you need to cross the same two together. If the A side is installed on the B side, it can't fly. It needs to be readjusted and the size needs to be the same as your own product before it can be used..
  • This is a propeller with a length of 46 mm/1.8 inch, and its central shaft hole is 0.8 mm/0.03 inch. It needs to be accurately matched to the size of the central hole of your product and the length of the propeller blade before it can be used correctly. Please carefully match the specifications you need..
Check Stock

Watersnake Venom 34lb Thrust Electric Motor (Fresh & Saltwater)

  • STURDY SIMPLE DESIGN: Our Watersnake Venom SXW electric motors provide saltwater anglers with a versatile range of tiller-steer transom-mount motors that are loaded with clever features. The shafts on all Venom SXW motors are an extra-tough composite constructed specifically for use in saltwater marine environments. The tiller handles are telescopic for versatility, comfort and control..
  • CONTROL + FEATURES: The 34lb motors have a two-blade propeller. The 54lb motors each run a three-blade propeller. All propeller shafts are stainless steel and the props have a weedless design, so you can push the boundaries during your next adventure. All the motors run on 12V power and operate with 5 forward and 3 reverse speeds, which are controlled with the tiller handle throttle..
  • ELECTRIC POWER: 54 lbs thrust, 12 Volt motor, 13-54 Amps / 34 lbs thrust, 12 volt motor, 7.5-34 amps. Battery Not Included. Each motor is suited to boats ranging from small tenders and tinnies up to dedicated estuary and inshore sportfishing boats..
  • VERSATILE TRANSOM MOUNT: The compact and stylish new Venom motor head design incorporates a new thicker ergonomic grip for the tiller handle. The new head design also includes a digital voltage meter display, so you can keep track of your batte....
Check Stock

Foredom Hand Piece #44Ht

  • Size: 2cm x 2cm x 2.5cm / 0.79inch x 0.79inch x 0.98inch. Diameter 20MM, length 25MM, apertures at both ends are 5MM and 8MM respectively.
  • Flexible Couplings made of premium aluminum alloy material, exquisite workmanship, bright appearance, good toughness..
  • It has the function of buffering, damping and improving the dynamic performance of the shaft series..
  • This high-quality rod coupler is widely used to connect servo motors, stepping motors, encoders, screw drives, mechanical platforms, etc..
  • Package included: 1 X Shaft Coupler Diameter 5mm to 8mm.
Check Stock

Watersnake Venom Swet 54 Pound Thrust 12V Electric Trolling Motor with 42\ Steel Shaft

  • STURDY SIMPLE DESIGN: Our Watersnake Venom SXW electric motors provide saltwater anglers with a versatile range of tiller-steer transom-mount motors that are loaded with clever features. The shafts on all Venom SXW motors are an extra-tough composite constructed specifically for use in saltwater marine environments. The tiller handles are telescopic for versatility, comfort and control..
  • CONTROL + FEATURES: The 34lb motors have a two-blade propeller. The 54lb motors each run a three-blade propeller. All propeller shafts are stainless steel and the props have a weedless design, so you can push the boundaries during your next adventure. All the motors run on 12V power and operate with 5 forward and 3 reverse speeds, which are controlled with the tiller handle throttle..
  • ELECTRIC POWER: 54 lbs thrust, 12 Volt motor, 13-54 Amps / 34 lbs thrust, 12 volt motor, 7.5-34 amps. Battery Not Included. Each motor is suited to boats ranging from small tenders and tinnies up to dedicated estuary and inshore sportfishing boats..
  • VERSATILE TRANSOM MOUNT: The compact and stylish new Venom motor head design incorporates a new thicker ergonomic grip for the tiller handle. The new head design also includes a digital voltage meter display, so you can keep track of your batte....
Check Stock

10:1 Planetary Gearbox 1/2\(12.7mm) Input Shaft for Nema 34 Stepper Motor 3000RPM Gearhead Gear Reducer CNC Benchtop Lathe Machine (10:1)

  • 1/2" (12.7mm) Input Shaft , connect directly with motors which has 12.7mm shaft.
  • Rated 30Nm high torque planetary gearbox ,10:1 speed reduction.
  • Nema34 flang, the gearbox must be screwed on the motor with the offer 4pcs screw to keep the concentricity. Very easy to install on motors, gearbox output shaft keyway dimension 5*5*25mm.
  • Rated speed is 3000RPM, precision less than 25 Arcmin.
  • This nema34 planetary gearbox mainly matches the stepper motor to reduce speed and increase torque. Widely used in CNC field on mill,lathe,bench,packaging machine etc..
Check Stock

BEISGUANGS Electric Bike Accessories Universal Torque Arm Conversion Kit for ebike Front or Rear Hub Motor Wheel E Bike kit Easy Install Reinforcement

  • 【Material】Torque arm is made of high-quality metal, with good design and strong resistance to deformation. The surface is galvanized to prevent corrosion and maintain gloss..
  • 【Size】Torque arm length 86mm, shaft hole 14mmX10mm, C clip 14mmX10mm, arm thickness 3mm, hub bracket thickness 4mm, C clip thickness 3mm, can be adjusted according to different configurations..
  • 【Function】This torque arm will help prevent the motor from loosening from the bicycle's front fork (front) or frame (rear fork), and prevent the slotted shaft from bending or breaking your dropouts. Necessary for high-power motors..
  • 【Installation】This torque arm is suitable for electric bicycle motors and electric bicycle conversion kits. Easy to install, the product is suitable for normal motor shafts, except for special shafts (the size of the motor shaft does not exceed 14mm)..
  • 【List】Contains 1 long reaction arm + 1 short reaction arm + 1 hex screw + 1 collar + 1 nut + 2 washers. (as the picture shows). It can provide maximum protection for your electric bicycle, motor and hub motor wheel..
Check Stock

Century Electric Motors C01575 Universal Bathroom Fan Replacement Electric Motor Kit with Fan 120 volts

  • 50 CFM, 0.65 amps, 3000Rpm, 120 Volts, 60Hz.
  • Motor is mechanically Reversible - shipped CCW shaft end..
  • Shaft = 3/16" X 1 3/4", wire length = 6" With 2-prong plug. Mounting studs 1 7/8" On center..
  • Kit contains: 1x motor, 1x fan = 4.5 (flat/paddle style). Replacement for motors Nutone Broan, Uppco, Ventorola E498-1, Bay Motors, Sears 569, Dayton....
  • Warranty- All parts sold by InnovativeSupply come with a 1 year, no questions asked, no hassle warranty..
Check Stock

Kitchen Basics 101 Universal Bathroom Vent Fan Motor Replacement Kit | 50 CFM

  • 50 CFM, 0.65 amps, 3000 rpm, 120 volts, 60Hz.
  • Motor is mechanically reversible - shipped CCW shaft end..
  • Shaft = 3/16 X 1 3/4 inch, wire length = 6 inch with 2-prong plug, mounting studs 1 7/8 inch on center..
  • Kit contains: 1x motor, 1x fan = 4.5 (flat/paddle style). Replacement for motors Nutone Broan, Uppco, Ventorola E498-1, Bay Motors, Sears 569, Dayton and many other units. Note: the brand and any related models mentioned above is only for compatibility demonstration..
  • This part by InnovativeSupply come with a 1 year, no questions asked, no hassle warr anty..
Check Stock

HONBAY Parrot AR Drone 2.0 Pinion and Spur Gears Upgraded Design and Material Orange Parrot AR Drone 1.0 & 2.0 Repair Gears Replacement Pinion and spur Spare Parts

  • The gears and their shafts link the motors to the propellers.
  • The propellers are attached to the Motors Carefully remove the cir-clip to remove broken propeller or shaft.
  • This kit includes 4 gears (high resistance plastic), 4 stainless steel shafts and 8 circlips. For an easy mounting, a special circlip tool is available in the mounting tools kit to easily insert and remove the circlips which hold the propellers and the gea.
Check Stock

Minn Kota 1363640 Riptide Fortrex Saltwater Hand-Steer Bow-Mount Trolling Motor with Lift-Assist & Bowguard, 80 lbs Thrust, 52' Shaft

  • Lift-Assist Mount: Patented Lift-Assist Design cuts the weight of stow and deploy in half. Features a stainless steel, nitrogen gas-charged spring.
  • Removable Bowguard 360° Bracket: Breaks away on impact from any angle and automatically resets itself, giving you uninterrupted fishing. Plus, its dual bearing system eliminates noise and the entire mount is easily removable.
  • Digital Maximizer: Trolling motors equiped with Digital Maximizer provide up to 5 times longer run times on a single battery charge. These variable speed trolling motors let you dial in your exact speed, and they deliver only as much power as you need, helping to conserve your battery for a full day of fishing.
  • Weedless Wedge 2 Prop: With swept-back flared blades to power through anything without battery-draining chopping and hacking, the Weedless Wedge 2 is one of the most trusted props in fishing.
Check Stock

Crazepony 4pcs 6x15mm Motor Speed Insane 19000KV for Blade Inductrix Tiny Whoop Micro JST 1.25 Plug

  • [Insane Speed] - These 19000kv / 70000 rpm coreless motors provide more extra power to fly with FPV camera..
  • [Champion's Choice] - These coreless tiny whoop motors are equiped With 1.25mm JST Plug, perfect for Inductrix FC..
  • [Tiny and Portable] - These coreless tiny whoop motors' Shaft Diameter: 0.8mm, Motor Diameter: 6mm, Motor Length: 15mm, Cable Length: 56mm..
  • [Lightweight] - These blade inductrix motors' weight is about 1.8g, 4 pcs (2 CW and 2 CCW)..
  • [Widely used] - These 6x15 motors work for Blade Inductrix, Tiny Whoop, Nano QX etc..
Check Stock

POWERTEC 71392 Trim Router Table

  • Bundle Includes: JessEm Rout-R-Lift II Router Lift for Porter Cable, Dewalt and Bosch Routers with 3.5" Diameter Motors and JessEm 10-Piece Insert Ring Set with Caddy for Router Plates and Lift Systems.
  • Compatibility: This model is designed for use with Porter Cable 690/890, DW 610/616/618, Bosch 1617/1618, or any other routers with 3.5" diameter motors.
  • Double-Sealed Ball Bearing: Thanks to the a double sealed bearing to the spindle, the Rout-R-Lift II can smoothly raise and lower your motor with ease.
  • Lift Shafts: The shafts are attached to the top plate and fasten in place with more than one screw spreading the lateral load and providing a very rigid and durable mount that will withstand the toughest routing operations.
  • Sturdy Construction: All the machined components on the Rout-R-Lift II are CNC machined for durability.
Check Stock

Panther Marine 55-0405 Static Motor Mount Plate

  • Works for mounting long shaft motors on short shaft transoms.
  • Perfect for jon boats and small fishing boats when a short shaft motor would otherwise be required.
  • Convenient economical durable and easy to install.
  • Model 55-0405 is the answer to difficult transom installations.
Check Stock