2PCS Aluminum Foil Tape for Ductwork, Heavy Duty & Heat Insulation, Premium 2IN x 65FT HVAC Metal Duct Sealing Roll Self-Adhesive Tapes for Dryer Vent,Electronics, Stove, Kitchen, Freezer(3.9Mil)
- ➤ WHY NEED 3.9MIL THICKNESS? - 3.9 mils is the perfect thickness for daily repair use silver duct tape. If the aluminum foil metal duct tape is too thin, then it is easy to break.
- if metal duct tape is too thick, it would be hard to stick on some surfaces. After we tested all the thickness, we recommend this 3.9 mils thickness metal foil tape to you..
- ➤ GOOD PERFORMANCE - This aluminum metal duct tape is made of high purity aluminum and combined with high performance adhesive, so the surface will be very beautiful and our metal duct tape is very sticky. Moreover, our duct tape went through special surface treatment, and thus has good light reflectivity and sealing. And the aluminum metal duct tape also has abilities like waterproof, fireproof, chemical resistance, UV resistance, heat resistance (-20℃-250℃), anti radiation, and anti-static..
- ➤ NO RESIDUE-This hvac foil aluminum tape roll is made of high quality adhesive, so the duct tape is very sticky! The foil duct tape can stick on most surfaces like wood, metal, plastic, marble, brick and tile. But it would not left residue after you peel it off, so you don't have to worry about it would damage the surface of your important things..
- ➤WIDE APPLICATION - This aluminum foil tape roll has gre....
Check Stock
Beaquicy STV-90 Dryer Duct Connector - Snap to Vent 90 Elbow - Indoor Hook-up Dryer Vent Kit
- ✅【PRODUCT DESCRIPTION】: The STV-90 dryer duct exhaust connector consists of a buckle to the exhaust 90 elbow, a buckle connector and a sealing ring connected to the wall conduit or dryer conduit. 90 degree diameter elbow dryer connectors are used to attach semi-rigid or flexible dryer hoses without hose clamps. Made of silicone and other sturdy materials to ensure that dryer hose vent fittings do not crack, tear or squeeze when using connectors..
- ✅【AIRTIGHT】: STV-90 dryer conduit connector Universal dryer connector for electric and gas dryers. The silicon seal ring of STV-90 dryer pipe connector provides you with a sealed dryer connection. The silicone seal has a strong viscosity and is not easy to fall off, making your dryer more efficient while consuming less energy, allowing clothes to dry faster and saving electricity..
- ✅【90 DAYS WARRANTY】:The STV-90 dryer duct exhaust connector supports 90 days return and exchange. Our company attaches great importanc e to the shopping experience of each customer. Risk-free shopping, if you have any quality problem during warranty period, please contact customer service in time. We will try our best to solve t....
Check StockSEAL Air Conditioner Decorative PVC line Set Cover kit, Durable Air Conditioning Tubing Cover for Air Conditionerand Heat Pump Systems (Air-Conditioner-Cover-Kit 4 Pipes)
- Clean-cut: Covers and hides unsightly refrigeration pipes on your external walls. Keep piping organized, clear up external wall for a professional installation appearance..
- Durable and Environmentally Friendly Materials: Composed of durable PVC straight pipe, PE bellow and ABS connector..
- Easy Installation : Infinite combinations of kit, any DIY work can make house appear chic. All pieces can be easily installed..
- Compatible : Durable Air Conditioning Tubing Cover for Central Air Conditioner and Heat Pump Systems..
- Package Included: 4-Straight Duct (pipe length: 39.37 inch).
Check StockHVAC Duct Start Collar, 12\ Round Snap Together Sheet Metal
- 4" Plastic inline round duct connector with backdraft damper..
- Outside dimension of the duct fits 4" inch flex or solid ducting pipe..
- Assembly: Press on chosen duct - flexible or straight - and use montage glue. tape or steel clamps tighten the connection..
- Connect dryer duct, exhaust or any other duct that needs only one way airflow with this backdraft preventer to ensure required air direction, and remove polluted air from accessing habitable areas..
- perfect for Heating. cooling or air conditioning - HVAC. bathroom and kitchen air exhaust. Heat-resistant from: 5 °F to 160 °F..
Check StockReflectix SPW0602508 6-Inch by 25-Feet Spiral Pipe Wrap
- The product is manufactured in United states.
- Simply wraps around your pipes or duct work overlapping approximately 1/2-Inch as you go.
- Secure with refectix reflective foil tape (4280-3007) around each end of your wrapped product.
- Provides an air space between the pipe and the wrap that will aid the insulation value.
Check Stock
RKI 4" - Professional Backdraft Damper Inline Spring Loaded for Dryer Duct
- Back draft damper for insertion into 4 inch ventilation ducts. The backflow damper RKI opens and closes automatically. It has a strong spring and can be installed either horizontally or vertically. The flap is suitable for retrofitting, since it is completely inside the duct.
- A tight sealing and fastening of the duct is achieved by the rubber strip attached to the outside of the draft blocker damper. The rubber seal prevents loud rattling when the flap blades open and close. The housing of the flap is made of galvanized steel, the flap blades are made of aluminum, the axle and spring are made of stainless steel.
- Designed for use in AC, dryers, exhaust, extractor or range hoods, heating systems, vents and other residential, commercial and industrial HVAC applications.
- FUNCTIONALITY: Duct draft stopper prevent cold air or wind from entering the ventilation pipe. In this case, the flap is installed in such a way that the flap leaves only open into the outgoing air direction. This means that no (cold) air / wind can penetrate the ventilation pipe from the outside..
Check Stock
10 Inch to 9 Inch Single Wall HVAC Duct Reducer & Increaser - Galvanized Sheet Metal Ducting Connector for Airflow, Heating, Cooling, & Air Ventilation System Extra Strength and Fittings
- D______ ______________ & __________________: Sheet metal HVAC Duct Reducer for flexible or metal HVAC Ducts and air vents. Used to connect two air ducts of different diameters to create a seamless ventilation. Sturdy steel ducting is perfect for DIY and Trade use. Our HVAC Duct Reducer & Increaser Galvanized Metal for Longer Lasting Quality. Galvanized pipe to be used for gas heating, ventilation and air conditioning only. Not to be used for solid fuel venting and Non-Crimped Ends..
- ________-______________ __________ __________: Our sheet metal reducers and increasers are manufactured from the highest quality of galvanized steel. These reducers are made of galvanized sheet metal. Perfect for use with either flexible duct or rigid sheet metal duct. Never be restricted to your air conditioner's ducting requirements again. Single Wall Galvanized Metal reducer for Duct / pipe reducing. Great for professionals and Homeowners. Metal is easy to drill with Self Drilling Screws..
- __________ ________________ ______ ________________: These galvanized duct reducers / Increaser can be used with fans, ducting, air-cooled hoods, and ventilation systems, that allowing you to lengthen and extend your ducting. They are the perfect sheet metal fitting for changing duct s....
Check StockDeflecto Dryer Vent Hood, 4\
- Includes 2 hooker upper protectors, 1 semi-rigid aluminum duct and 1 gasket.
- Duct twists on hooker upper protectors and slides over dryer vent and outlet pipe.
- Protects duct from being smashed behind dryer which can cause unsafe dryer operation and longer drying times.
- No clamps, no tools, no tape. Gasket may be needed for proper fit on some dryers.
Check StockDeflecto Vent Hood, 4\
- Includes 2 hooker upper protectors, 1 semi-rigid aluminum duct and 1 gasket.
- Duct twists on hooker upper protectors and slides over dryer vent and outlet pipe.
- Protects duct from being smashed behind dryer which can cause unsafe dryer operation and longer drying times.
- No clamps, no tools, no tape. Gasket may be needed for proper fit on some dryers.
Check StockLambro #246 6' Aluminum Duct Connector
- "LAMBRO INDUSTRIES" ALUMINUM DUCT CONNECTOR.
- Used for connecting 2 lengths of 6" flexible aluminum duct together.
Check StockDeflecto 4\ Oval Duct, Adjustable from 27\ to 48\ (DAF2)
- Allows dryer installation as little as 3" from the wall.
- Pipe can conveniently be cut to shorter lengths.
- Prevents duct from being smashed behind dryer.
- Allows for vertical, horizontal or diagonal installation in tight spaces.
Check Stock
90 Degree Dryer Close Elbow Vent Tube Connector，Metal Elbow Connector for HVAC Duct Ducting Pipe or Hose Ductwork, 4\
- ✔ [Widely Compatible] The end of elbow connector is simple to adjust using duct crimper, crimped at the end of elbow connector. This ideal connect with most pipe, most commonly used in HVAC appliance venting, especially clothes dryer or bathroom venting. You must make sure that your your pipe size matches this one before purchasing. This is very important important important..
- ✔ [Venting Kit Assembly Included] : 1 X 90 Degree Elbow. Solving the problem that pipe linking with steering. makes it very versatile..
- ✔ [Simple Install by Yourself] This elbow connector is simple to connect with pipe. Fitting perfectly with any other 4” pipe, vent and connector, just push the elbow connector into the pipe and fittings together. Easy to use DIY and it’s a perfectly designed product for home improvement..
- ✔[Premium Quality Affordable] 4" diameter 90 degree duct elbow connector is so lightweight and made of flame resistant steel and long durability. It is the best way to ensure better air circulation at your home. You don't have to compare other prices and quality. Buying directly is the best option..
- ✔ [Best Choice With Confidence] This LG venting kit is a perfect choice for you, There is no reason for 100% refund or exchange within 30 da....
Check StockBuilder's Best 084131 SAF-T Readi-Pipe Flexible Semi Rigid Aluminum Dryer Vent Duct, 2 Clamps Included, 4
- This Readi Pipe Kit includes an 8-foot durable semi-rigid (flexible) aluminum dryer duct with pre-treated ends and two steel screw clamps..
- Made with 100% aluminum, this duct features soft cuff ends that are factory treated for quick and secure attachment to standard 4" connections..
- Steel screw clamps tighten down over the pre-treated ends for secure connections..
- Designed for use as a dryer transition duct..
- Quality made in the USA by Builder's Best, Inc. Builder's Best brand is a US registered trademark. SAF-T-DUCT is a registered trademark by Builder's Best, Inc. SAF-T-DUCT Dryer Venting is the trusted solution for professional installers nationwide. It meets all clothes dryer manufacturer specifications..
Check Stock
