Categories

Best Ductile Iron Flange

Martin JA 1 1/4 Quick Disconnect Bushing, Ductile Iron, Inch, 1.25\ Bore, 1.375\ OD, 1.06\ Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Ductile iron for greater strength than gray cast iron and resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

Martin J 100MM Quick Disconnect Bushing, Ductile Iron, Metric, 100 mm Bore, 130.75 mm OD, 114.3 mm Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Ductile iron for greater strength than gray cast iron and resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

Martin SK 24MM Quick Disconnect Bushing, Ductile Iron, Metric, 24 mm Bore, 71.42 mm OD, 49.21 mm Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Ductile iron for greater strength than gray cast iron and resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

Aexit White Gray Nuts Screw Mounted Cupboard Drawer 3cm Dia Pull Handle Nuts Knob Handle

  • Price For: Each Basic Material: Ductile Iron System of Measurement: Inch Material Grade: Grade 2 Item: Handle Nut Nut Style: Handle Nut Fastener Thread Direction: Right Hand Fastener Thread Type: UNC Dia./Thread Size: 5/16"-18 Flange Dia.: 15/16" Length: 3-3/4" Fastener Finish: Plain Country of Origin (subject to change): Multiple.
Check Stock

TB Woods Type JA JAM14MM Sure-Grip Bushing, Metric, 14 mm Bore, 34.9 mm OD, 25.4 mm Length, 198 lbs/in Torque, Standard Design, Standard Keyway

  • Quick disconnect bushing with a torque capacity of 198 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Ductile iron for greater strength than gray cast iron and resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with quick disconnect bushings from various manufacturers.
Check Stock

Steel Dragon Tools® 74227 H4 Hinged Pipe Cutter 2\ - 4\ Capacity Fits REED® and RIDGID® Cutter Wheel

  • H4 will cut cast iron and ductile iron with Steel Dragon Tools H4I 03122 cutter wheels (included a.
  • H4 will cut cast iron and ductile iron with Steel Dragon Tools H4I  03122 cutter wheels.
  • Full-closed frame for maximum efficiency under minimal effort..
  • Guide fingers ensure accurate wheel alignment for even cut..
  • Steel Dragon Tools H4 will accept compatible Reed cutting wheels..
Check Stock

IDEAL Electrical 74-028 Ductile Iron Bender – Conduit Metal Pipe Bender w/handle for 1 in. EMT Pipes, Benders

  • ... Precision Bending: the metal pipe bender is equipped with markings that represent star, arrow, degree scale, and rim notch to get perfect bends. The markings are raised and cast into both sides to aid visibility of the users.
  • Durable Construction: made with ductile iron, the rugged construction of iron bender head offers durability to withstand long-term heavy-duty use. Baked-on blue enamel finish of the handle resists corrosion and other abrasive factors.
  • Convenient Usage: the grooved internal hook surface of the ductile pipe bender prevents slippage while applying extra force in use to avoid accidents. The heat-treated sturdy stress points allow the users to get accurate bends with ease.
  • Product Specifications: The Ductile EMT bender is suitable to bend 1 in. EMT metal pipes as well as 3/4 in. Rigid & 3/4 in. IMC pipes. It uses industrial standard Benfield bending system for bending. Bender handle is also included with the bender head.
Check Stock

Mahle 51617 Engine Piston Ring Set

  • Highest quality OE replacement piston ring set available - MAHLE replacement ring sets are designed with OE form, fit, and function.
  • MAHLE piston rings feature cast iron or ductile cast iron upper compression rings with a positive twist and barrel face for instantaneous break in.
  • MAHLE second rings provide superior oil control, improved combustion gas management, top ring stability, and sealing providing the best possible oil control and least amount of power loss.
  • MAHLE CP-20 oil rings provide superior oil control in all applications utilizing the exclusive 20 degree ear angle for the best possible side seal in the piston oil ring groove and simplifies installation.
  • MAHLE continues to lead the industry with SAE 9254 high alloy steel Napier second rings providing high quality grey iron/ductile iron BT and RBT second rings.
Check Stock

MAHLE 41940.010 Engine Piston Ring Set

  • Highest quality OE replacement piston ring set available - MAHLE replacement ring sets are designed with OE form, fit, and function.
  • MAHLE piston rings feature cast iron or ductile cast iron upper compression rings with a positive twist and barrel face for instantaneous break in.
  • MAHLE second rings provide superior oil control, improved combustion gas management, top ring stability, and sealing providing the best possible oil control and least amount of power loss.
  • MAHLE CP-20 oil rings provide superior oil control in all applications utilizing the exclusive 20 degree ear angle for the best possible side seal in the piston oil ring groove and simplifies installation.
  • MAHLE continues to lead the industry with SAE 9254 high alloy steel Napier second rings providing high quality grey iron/ductile iron BT and RBT second rings.
Check Stock

MAHLE 51870CP Engine Piston Ring Set

  • Highest quality OE replacement piston ring set available - MAHLE replacement ring sets are designed with OE form, fit, and function.
  • MAHLE piston rings feature cast iron or ductile cast iron upper compression rings with a positive twist and barrel face for instantaneous break in.
  • MAHLE second rings provide superior oil control, improved combustion gas management, top ring stability, and sealing providing the best possible oil control and least amount of power loss.
  • MAHLE CP-20 oil rings provide superior oil control in all applications utilizing the exclusive 20 degree ear angle for the best possible side seal in the piston oil ring groove and simplifies installation.
  • MAHLE continues to lead the industry with SAE 9254 high alloy steel napier second rings providing high quality grey iron/ductile iron BT and RBT second rings.
Check Stock

IDEAL Electrical 74-034 Ductile Iron Bender – Conduit Metal Pipe Bender w/handle for 1.25 in. EMT Pipes. Cutters and Benders

  • ... Precision Bending: the metal pipe bender is equipped with markings that represent star, arrow, degree scale, and rim notch to get perfect bends. The markings are raised and cast into both sides to aid visibility of the users.
  • Durable Construction: made with ductile iron, the rugged construction of iron bender head offers durability to withstand long-term heavy-duty use. Baked-on blue enamel finish of the handle resists corrosion and other abrasive factors.
  • Convenient Usage: the grooved internal hook surface of the ductile pipe bender prevents slippage while applying extra force in use to avoid accidents. The heat-treated sturdy stress points allow the users to get accurate bends with ease.
  • Product Specifications: The Ductile EMT bender is suitable to bend 1-1/4 in. EMT metal pipes as well as 1 in. Rigid & 1 in. IMC pipes. It uses industrial standard Benfield bending system for bending. Bender handle is also included with the bender head.
Check Stock

COGNATIVE 5-Inch Heavy Duty Bench Vise Ductile Iron Bench Vise 360° Multi-Purpose Bench Vise with Anvil, Clamp force 4000KG, Blue

  • Durability and Sturdy -- our bench vise is made from high-strength Ductile iron 60,000 PSI, Blue fine powder coated body, zinc plated spare parts for long time use.
  • Ductile Iron body for stronger Clamping Force: 4000kg(8800lbs).
  • Specification -- Jaw width: 125mm(5"), Opening:125mm(5"), Throat Depth:67mm(2-5/8").
  • Applicable Scene -- This 5" heavy-duty professional bench vise is suitable for use in the workshop, great for woodworkers, fitters, etc., and this bench vise can hold wood, aluminum alloy, steel, plastic and other materials.
  • Easy Using -- There are straight scale and round scale on our ductile iron bench vise body for more precise positioning works, easy mounting on the bench with 360-degree swivel base.
  • Customer Service -- We are committed to providing customers with satisfactory products and services. If you have any questions about the products, please contact us, and we will reply to you as soon as possible.
Check Stock

Powerbuilt 4 Ton Ratchet Jack Stand - 647529, Red

  • Precision 4 ton jack stands with a lifting range of 13 in. to 20-1/4 in..
  • Strong heavy duty stamped steel with fully welded seams.
  • Dependable ductile iron masts with 10 different height settings.
  • Innovative wide-angle four point stance for extra stability.
  • Stylish and affordable Powerbuilt products meet or exceed ASME and PALD standards.
  • Four point wide stance for maximum stability.
  • Heavy duty stamped steel frame with fully welded seams.
  • Ratcheting ductile iron masts offer 10 height settings.
Check Stock