Categories

Best Ducts And Vents

4 Inch Draft Blocker Backdraft Damper Duct Draft Stopper One-Way Airflow Ducting Insert Backflow Preventer Inline Fan Vent Deflector Silver

  • 【Material】The 4 inch backdraft damper is made of a Galvanized steel, the flap leaves are made of aluminum, while the Axis and spring are made of stainless steel..
  • 【Installation】The backdraft damper is installed by pushing it into the ventilation pipe as far as it will go. The position of the spring should be horizontal when the flap is installed horizontally so that it can be opened and closed optimally. This also applies to the vertical installation..
  • 【Function】This airflow regulating backdraft shutter fits over the TD lip and is designed to improve ventilation by preventing air from re-circulating when the fans are not in use..
  • 【Wide Application】 These backdraft dampers can be widely used in ACs, exhaust fans, extractors, range hoods, heating ducts, vents and other residential, commercial and industrial applications..
  • 【Note】Back draught valves can be inserted into ventilation ducts which are flexible or non flexible. Cannot be used with plastic ducts as the sizes are different..
Check Stock

calimaero KWG 6 inch Round Stainless Steel Ventilation Grill Hood with Rubber Seal

  • The bull nose wall vent is ideal for application in outdoor areas. The shape of the hood as well as the fixed downwards protruding slats prevent....
  • BEFORE BUYING, please note, this is to be installed in metal ducts, not in pvc or other plastic pipes. Please measure the diameter of your duct before....
  • INSTALLATION: 1. Install the rubber seal on the outer edge of the hood, sometimes patience is required Insert the lip..
  • INSTALLATION: 2. Insert the weather protection grille with the nozzle into the ventilation pipe and fasten it to the wall with the enclosed screws.....
  • Ideal for all tumble dryer vent pipes / hoses, bathroom vents & extractors, air conditioning units, kitchen fans & vents, all home wall vents, heat....
Check Stock

4 Inch Draft Blocker Backdraft Damper Duct Draft Stopper One-Way Airflow Ducting Insert Backflow Preventer Inline Fan Vent Vent Deflector (4 in)

  • 【Material】The 4 inch backdraft damper is made out of a Galvanized steel, the flap leaves are made of aluminum, while the Axis and spring are made of stainless steel..
  • 【Installation】The backdraft damper is installed by pushing it into the ventilation pipe as far as it will go. The position of the spring should be horizontal when the flap is installed horizontally so that it can be opened and closed optimally. This also applies to the vertical installation..
  • 【Function】This airflow regulating backdraft shutter fits over the TD lip and is designed to improve ventilation by preventing air from re-circulating when the fans are not in use..
  • 【Wide Application】 These backdraft dampers can be widely used in ACs, exhaust fans, extractors, range hoods, heating ducts, vents and other residential, commercial and industrial applications..
  • 【Note】Back draught valves can be inserted into ventilation ducts which are flexible or non flexible. Cannot be used with plastic ducts as the sizes are different..
Check Stock

Hon&Guan 4'' Dryer Vent Covers for House, Dryer Vent Cover Outdoor Exterior Wall Vent Cover Opening Flap Vent with Built-in Guard Screen.

  • ...the nozzle into the square exhaust fan outlet. The 4″ gable vent is then fastened to the wall to create a tight seal using the 4 stainless steel screws. Easy to install, easy to remove and clean, saving you valuable time and effort..
  • [WIDELY USE]: Hon&Guan 4” exterior wall vent cover are suitable for ventilation ducts, bathroom vents and fume extraction equipment, air conditioners, kitchen fans and vents, all home wall vents, heat transfer, ventilation systems and industrial use, keeping you away from unwanted odors and outdoor elements. In cold weather, the easy moving lamellas on the dryer vent cap helps keep cold air from passing through the vents..
  • [HIGH QUALITY]: Includes 1 pc 4 inch outdoor dryer vent cover and 4 pcs screws. Our exterior dryer vent cover made in high-impact poly plastic construction, contain UV stabilizer to reduce fading due to exposure to sunlight..
  • [GREAT VENTILATION]: Hon&Guan outside dryer vent covers for house helps keep wind, rain and snow from entering outdoor dryer vents, also protect your house from damage..
  • [BUY WITH CONFIDENCE] We promise to ensure your absolute satisfaction with every purchase. Risk-free shopping. If you are not satisfied, you can replace it for free or give it a full refund..
Check Stock

Dap 18814 Adh Slnt Gray Polyurethane Sealant, 10.1 oz

  • This high performance sealant offers superior adhesion to a variety of substrates and remains permanently flexible..
  • Ideal for use on doors, windows, sidings, ducts and vents..
Check Stock

Fear Inoculum

  • This Digital Angle Gauge and Level can measure or set angles, check relative angles with zero calibration feature, or can be used as a digital level.
  • High visibility reverse contrast display improves visibility in dimly lit work environments.
  • Strong magnetic base to attaches to conduit, pipes, saw blades, vents, ducts, and other ferromagnetic surfaces.
  • V-groove edges enable optimal alignment on conduits and pipes for bending and alignment.
  • 0 to 90-Degree and 0 to 180-Degree measurement ranges provide easy use in applications such as woodworking, bending conduit, installing electrical panels, and working on machinery.
Check Stock

XFasten Professional Aluminum Foil Tape, 3.6 mil, 2 Inches x 55 Yards (3-Pack)

  • Industrial-grade Aluminum Reflective Foil Tape equipped with high-heat capacity epoxy resin and quick-release silicone adhesive liner. Withstands extreme humidity and temperature from -30°C to 180°C..
  • This Metallic Furnace Duct Tape for HVAC is ideal for sealing hot and chilly air ducts, repairing metal seams and insulating aluminum duct pipes..
  • Increases temperature efficiency, making this dryer foil tape ideal for insulation, heat sinks, AC-units, heaters and vents. Heavy-duty performance against flame, moisture, weather, corrosion and rusting..
  • This adhesive aluminum tape provides excellent bond on metals, plastics, copper, ceramic and concrete. Conformable and pressure sensitive adhesive enables it to fit on corrugated joints and irregular corners..
  • Excellent flame retardant and vapor barrier. Can be stored at any environment without degrading, making this aluminum duct tape ideal for window type AC and heaters, vents and ducting..
Check Stock

P Tec Products Low Profile Vent White

  • The Low-Profile Vent is commonly used in apartments and homes, especially for new vent installations. It is installed over exhaust ducts from: dryers, bathrooms, stoves or range hoods..
  • Increased airflow and decreased drafts – Keep out birds, insects, rodents, scorpions and more..
  • Magnetic outer door retention to prevent door flapping in gusty conditions..
  • Safer than traditional vents with reduced lint-build-up..
  • Installs in minutes, cleans in seconds -Reduced clothes drying time..
Check Stock

Dap Clear Polymer Door, Siding and Window Sealant 9 oz.

  • Purpose of use for caulk & sealants, silicone-adhesives.
  • All purpose sealant specially formulated with kwik Dry technology allowing it to be exposed to water and moisture after only three hours without washing out.
  • Ideal for sealing windows, door frames, corner joints, siding, trim, butt joints, baseboards, moldings, pipes, ducts, and vents.
  • Best of the best for indoor and outdoor sealants.
  • Permanently watertight and weather tight seal.
Check Stock

Sliver Aluminum Foil Tape for Duct Work, 1 in x 66 ft (4 mil) Reflectix Tape Perfect for HVAC, Patching Hot, Cold Air Ducts, Metal Repair…

  • 【RUI SPEED foil tape】Made from Acrylic adhesive and Aluminum foil, High temperature resistance, it is a metal tape for duct work.
  • 【HVAC tape for ducts】Used for shielding, insulating, repairing, seaming and sealing, Mainly used for HVAC, chilly air ducts, dryer vent, vents, refrigerators, air conditioning, hoods, cars, etc.
  • 【Insulation tape】Ensure the heating and cooling effects of the material, it is very suitable for maintenance tasks and insulation tape, provides a durable bond at low and high temperatures.
  • 【Metallic duct tape】Can be combined with most materials, whether metal or ground, can be cut into various specifications according to customer requirements, which is not easy to crack and damage after repeated use or multiple bending.
  • 【Ducting tape aluminum】Using high-quality pressure-sensitive adhesive, strong adhesion, anti-aging and other effects, good waterproof performance, UV degradation, against flame, insulation, moisture,corrosion.
Check Stock

Sliver Aluminum Foil Tape for Duct Work, 1/2 in x 150 ft (4 mil) Reflectix Tape Perfect for HVAC, Patching Hot, Cold Air Ducts, Metal Repair……

  • 【RUI SPEED foil tape】Made from Acrylic adhesive and Aluminum foil, High temperature resistance, it is a metal tape for duct work.
  • 【HVAC tape for ducts】Used for shielding, insulating, repairing, seaming and sealing, Mainly used for HVAC, chilly air ducts, dryer vent, vents, refrigerators, air conditioning, hoods, cars, etc.
  • 【Insulation tape】Ensure the heating and cooling effects of the material, it is very suitable for maintenance tasks and insulation tape, provides a durable bond at low and high temperatures.
  • 【Metallic duct tape】Can be combined with most materials, whether metal or ground, can be cut into various specifications according to customer requirements, which is not easy to crack and damage after repeated use or multiple bending.
  • 【Ducting tape aluminum】Using high-quality pressure-sensitive adhesive, strong adhesion, anti-aging and other effects, good waterproof performance, UV degradation, against flame, insulation, moisture,corrosion.
Check Stock

uxcell 15mm Aluminum Foil Tape High Temperature Tape for HVAC,Sealing,Patching Hot and Cold Air Ducts Adhesive Tape 50m/164ft

  • Temperature resistance：long term: 80℃, short term.
  • Aluminum Foil General Purpose - Waterproof, Flame Retardant, Strong Rubber Based Adhesive, Directly stretched around the area to be protected, no adhesives needed..
  • Good flame retardant and vapor barrier. Can be stored at any environment without damage, making this aluminum duct tape suit for window-type AC and heaters, vents, and ducting.Double sided conductive, ultra thick aluminum foil, conductive glue, anti-interference for electronic products, and wire harness wrapping has a better effect.
  • This adhesive aluminum tape provides excellent bond on metals, plastics, copper, ceramic and concrete. Conformable and pressure sensitive adhesive enables it to fit on corrugated joints and irregular corners..
  • Perfect for sealing air ducts, for Pipe Sealing, HVAC, Metal Repair, Patching Hot Cold Air Ducts, Heat Insulation..Please be noted,the tape only one side has adhesiveness.
Check Stock

uxcell 10mm Aluminum Foil Tape High Temperature Tape for HVAC,Sealing,Patching Hot and Cold Air Ducts Adhesive Tape 20m/65ft

  • Temperature resistance：long term: 80℃, short term.
  • Aluminum Foil General Purpose - Waterproof, Flame Retardant, Strong Rubber Based Adhesive, Directly stretched around the area to be protected, no adhesives needed..
  • Good flame retardant and vapor barrier. Can be stored at any environment without damage, making this aluminum duct tape suit for window-type AC and heaters, vents, and ducting.Double sided conductive, ultra thick aluminum foil, conductive glue, anti-interference for electronic products, and wire harness wrapping has a better effect.
  • This adhesive aluminum tape provides excellent bond on metals, plastics, copper, ceramic and concrete. Conformable and pressure sensitive adhesive enables it to fit on corrugated joints and irregular corners..
  • Perfect for sealing air ducts, for Pipe Sealing, HVAC, Metal Repair, Patching Hot Cold Air Ducts, Heat Insulation..Please be noted,the tape only one side has adhesiveness.
Check Stock