Categories

Best Durable Pulleys

Powerbuilt 648460 Power Steering Pulley Puller, black

  • For removing pressed-on pulleys from power steering Pumps and alternators on or off vehicle..
  • For removing pressed-on pulleys from power steering pumps and alternators, on or off vehicle.
  • Four threaded holes on puller body allow narrow and wide jaw positions.
  • Heavy duty heat-treated alloy steel components.
Check Stock

Genuine Gates 36113 DriveAlign Belt Drive Idler/Tensioner Pulley

  • Gates is a leading manufacturer of Original Equipment (OE) idler pulleys. Gates DriveAlign(R) Idler Pulleys meet or exceed OE specifications. High quality, high strength bearings run cooler and last longer than original bearings. DriveAlign Idler Pulleys are built to last by resisting dirt, salt, and other under-hood contaminants. Designed for use on automobiles and light trucks as locked center tensioning, automatic belt tensioning and idler pulleys.Additional hardware included with most idler pulleys to make installation easier..
  • Original Equipment (OE) Exact - Looks and fits just like the OE Bearing meets or exceeds OE specifications and is designed for application-specific speed and load requirements.
  • Steel or thermoplastic construction provides high durability for extended life.
  • Industry's best light-duty coverage and consistently first to market for late model application coverage.
  • Vibration damping system extends life of tensioner and other accessory components.
Check Stock

OTC 4754 Universal Pulley Holder Wrench with Interchangeable pins

  • Universal design fits many different sized pulleys having slots or holes, such as camshaft pulleys and crankshaft pulleys.
  • Wrench is adjustable from 1-1/2 to 8-5/8 inches, allowing it to work with a wide variety of pulleys.
  • Includes 4 different sets of interchangeable step pins.
  • Long handle enables you to easily hold the pulley when tightening or loosening retaining bolts.
  • Rugged blow-molded storage case keeps set components contained and organized so they are ready to use when you need them.
Check Stock

Orion Motor Tech Harmonic Balancer Puller Kit, Power Steering Pulley Puller Installer Tool Set, Automotive Steering Wheel Puller Tool Kit, Flange Type Gear and Crank Puller Set

  • GEAR PULLER SET: This Orion Motor Tech tool kit removes universal harmonic balancers, gear pulleys, steering wheels, crankshaft pulleys, and more for easy automotive repair and maintenance.
  • COMPLETE 49-PIECE SET: This gear puller kit includes a steel yoke, a pressure screw, 3 adaptors, and 30 bolts in the most needful SAE and metric sizes—1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, M8x1.25, and M10x1.5—to suit your different needs.
  • the 4-slot yoke also allows you to use it for two or three-slot operation with ease.
  • DURABLE PERFORMANCE: Each of these crank puller tools is constructed from hardened 45# steel while the centering adaptors are further heat-treated and anodized for the necessary strength to get your work done right.
  • all metric bolts are blackened and all SAE bolts are chrome-plated for easy identification, offering you years of outstanding dependability and superior corrosion-resistant service.
  • SCRATCH-FREE OPERATION: Thanks to the well-designed yoke, pressure screw, and washers, pressure is evenly distributed to pulleys for safe and worry-free servicing.
  • WIDE COMPATIBILITY: Including stepped bolts for 1990 and newer GM 3300-3800 V6 crankshaft pulleys, this harmonic balancer tool kit works on most cars, pickups, and SUVs in the market.
Check Stock

GEARWRENCH Fan Clutch Service Set |Fan Nut Wrenches|Pully Holder|Blow Mold Case| - 41580D

  • Gearwrench's Fan Clutch Service Set covers most vehicles with bolt on pulleys.
  • Also covers newer Chrysler engines with press on pulleys requiring special pins to hold housing.
  • Features the patented universal PULLEY holder.
  • Fan nut wrenches included: 22mm, 36mm, 40mm, 50mm, & diesel.
  • Durable blow mold case for tool retention.
Check Stock

Hoist Electric Winch Electric Lifting Traction Hoist 3 in 1 Wireless Control 7.6m/25ft Wire Control Manual Control Overhead Lift with Overload Protection Blue Color 110V (500kg)

  • NO TYING OFF REQUIRED - The "Tie Boss" patentened Jam cleat allows for one hand operation. Whenever hoisting or lowering, when the rope is released the Jam cleat will clamp the rope at that location. To release just give a slight tug at an angle and it releases similar to Veneitan Blinds.
  • USE TOGETHER OR SEPERATELY - The system comes with 2 pulleys and 1 3/8 inch Heavy Duty Tie Boss Jam cleat. The pulleys can be used all together in a 2 pulley system or additional pulleys can be added if more mechanical advantage is needed. The Tie Boss Jam cleat can also be used speartely as a tie down or store up..
  • STRONG DURABLE CONSTRUCTION: The block and tackle is rated for 300 lbs. The Jam cleat is made of durable nylon. Each pulley is small enough to be portable but large enough to keep the rope on track and prevent tangles during storage..
  • LIMITED LIFETIME WARRANTY - We offer a Lifetime warranty on all parts with the exception of the rope..
Check Stock

OEMTOOLS 27031 Power Steering Pulley Puller and Installer Kit, Removes and Installs Power Steering Pump Pulleys on Most Domestic Vehicles, Ford, GM, VW

  • POWER STEERING PULLEY INSTALLER AND REMOVER: Our power steering pulley tool is designed to remove and install power steering pump pulleys on most domestic vehicles.
  • Power steering pulley remover pulls pressed-on water pump pulleys of GM V6 engines.
  • WORKS WITH MANY VEHICLES: This power steering pump pulley tool comes with two screws for use on most Ford, Chrysler, GM, and VW power steering pulleys with Saginaw, Thompson and Ford C111 and C2 pumps.
  • Pulls pulleys on GM belt-driven vacuum pumps.
  • HEAVY-DUTY POWER PULLER: The pulley clamp and removal screws in this OEM pulley puller installer kit are composed of rugged steel for long-lasting strength and durability.
  • Power steering pump pulley installer designed to tackle any small pulley job.
  • CONVENIENT STORAGE: Our power steering puller and installer set comes in a molded carrying case for safe storage and easy portability.
  • Take this power steering pump puller/installer from job to job while keeping your puller kit organized.
  • PRODUCT SPECIFICATIONS: Pulls any pulley with hub diameters measuring 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inches.
  • Pulls pulleys on GM belt driven vacuum pumps.
  • Pulls pressed-on water pump pulleys of GM V6 engines.
Check Stock

OEMTOOLS 37031 Power Steering Pulley Puller and Installer Kit, Removes and Installs Power Steering Pump Pulleys on Most Domestic Vehicles, Ford, GM, VW , green

  • POWER STEERING PULLEY INSTALLER AND REMOVER: Our power steering pulley tool is designed to remove and install power steering pump pulleys on most domestic vehicles.
  • Power steering pulley remover pulls pressed-on water pump pulleys of GM V6 engines.
  • WORKS WITH MANY VEHICLES: This power steering pump pulley tool comes with two screws for use on most Ford, Chrysler, GM, and VW power steering pulleys with Saginaw, Thompson and Ford C111 and C2 pumps.
  • Pulls pulleys on GM belt-driven vacuum pumps.
  • HEAVY-DUTY POWER PULLER: The pulley clamp and removal screws in this OEM pulley puller installer kit are composed of rugged steel for long-lasting strength and durability.
  • Power steering pump pulley installer designed to tackle any small pulley job.
  • CONVENIENT STORAGE: Our power steering puller and installer set comes in a molded carrying case for safe storage and easy portability.
  • Take this power steering pump puller/installer from job to job while keeping your puller kit organized.
  • PRODUCT SPECIFICATIONS: Pulls any pulley with hub diameters measuring 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inches.
  • Pulls pulleys on GM belt driven vacuum pumps.
  • Pulls pressed-on water pump pulleys of GM V6 engines.
Check Stock

6FT Heavy Duty Sturdy Sliding Barn Door Hardware Kit Single Door, Smoothly and Quietly, Simple and Easy to Install -Fit 1-3/16' to 2' Thickness & 36' Wide Door Panel（J Shape）

  • [High-quality hardware materials] :The sliding door kit is made of high-quality carbon steel, matt black finish, to ensure that the product is corrosion-resistant, waterproof, fire-proof, rust-proof, durable, and maintain its beauty and service life for many years..
  • [Product details]:Sliding door hardware kits, crawlers and pulleys can bear a weight of 220 pounds, a minimum clearance of 6" is required above the top of the door, and the maximum width of the door is 36".
  • the thickness of the applicable door: 1-3/16" to 2", saving space, Very sturdy and safe..
  • [Packing method]: splicing track, 2 J-type pulleys, 2 anti-jumping discs, 2 door stops, 1 floor guide rail, and all the hardware required for hanging the door. Please note that only the hardware, not the door..
  • [Quiet and no noise]：High-quality pulleys can make the pulleys slide quietly and smoothly on the track at any time. There are 2 anti-skip discs on the guide rail to ensure that the pulley is more stable. This barn door kit will be better used for your precious doors and bring you a more comfortable experience..
  • [Lifetime Quality Assurance]: Whether you encounter any problems before or after purchase, please contact us 24 hours, our professional customer service team will definitely solve the ....
Check Stock

Garage Door Extension Spring Pulley Sheave Kit +SAFETY CABLES & INSTRUCTIONS (1set）

  • Replacing the pulleys on your door will make the door run much smoother and prevent cable wear. Replace the door cable and install.
  • PLEASE-INSTALL SAFETY CABLES ON YOUR EXTENSION SPRING DOOR 6 RIVETS IN EACH HEAVY DUTY BALL BEARING PULLEY.
  • INCLUDED IN THIS KIT: 2 - 3" STUD PULLEYS 2 - 3" CLEVIS PULLEYS 4-3/8" BOLTS 4-3/8" NUTS 4-3/8" LOCK WASHERS 1 PAIR-1/8" DOOR CABLE 1 PAIR-1/8" SAFETY CABLE 2-CABLE LACING BRACKETS 2-S HOOKS 2-5/16" EYE BOLTS 4-5/16 NUTS.
  • INSTRUCTION SHEET REPLACING THE PULLEYS ON YOUR GARAGE DOOR MAKES THE WORLD OF DIFFERENCE YOUR DOOR WILL RUN MUCH SMOOTHER. THIS IS NORMAL MAINTENANCE THAT CAN EASILY.
Check Stock

scottchen PRO 3' Heavy Duty Garage Door Pulley Kits, 3/8' Arbor 200LB Load, 4 Sheave Pulleys, 2 Clevis Forks, 4 Bolts and Nuts Kit

  • 【Function】This 3in garage door pulley kit designed to repair or replace damaged parts of your old, worn, noisy and jumping doors. Provide a quiet, smooth and pleasant door opening/closing..
  • 【Compatible】The 3in sheave pulley is 3/8” bore and 3/8” cable groove, which adapt to most commonly garage doors and accept max 5/16” diameter pulling cable or straps..
  • 【Valued Package】The package include 4 pulleys and 2 clevis forks, this can be used as 2 fixed pulleys plus 2 sliding clevis wheel pulleys, fulfill your various demand. Coming with 4 screws and nuts, saving your time to look for from drawer or corner..
  • 【High Quality】The garage door pulley system is heavy duty, 200lb load rating for doors up to 400lb. Durable steel construction, center race with 9 ball bearings and pre-lubricated in factory for smooth sliding..
  • 【Kindly Reminder】Professional installation is recommended. If DIY, please remember wearing safety guard always, using the proper tools and install properly..
Check Stock

Sterling PULZ8 Single Swivel Pulley Wheel, Silver

  • High quality materials: Our pulley wheel made of 304 stainless steel, Rugged nylon sheave ,wear-resistant, rust-proof and durable, suitable for all types of wet and difficult outdoor environments..
  • Effort-saving Design : The fixed pulley prevents the rope from twisting, The smooth roller ensures a good movement of the rope..
  • Quiet Pulley Wheel:Our pulley wheel uses flexible and smooth wheels can reduce the noise and would not affect surrounding life at all..
  • Easy to Use : Flexible sliding pulleys that can withstand heavy loads.
  • Wide Applications : Rotating pulleys can be used with indoor or outdoor ropes or cords for flexible sliding..
Check Stock

Lisle 39000 Pulley Puller

  • The unique puller body completely houses the pulley hub to prevent slipping on even the tightest pulleys.
  • Works on traditional V-shaped pulleys and serpentine belt system pulleys.
  • Also works faster than other conventional pulley pullers.
  • Fits most domestic models including GM 3.1 and Quad 4 engines.
Check Stock