Categories

Best Durable Tap And Drill Set

H.S.S. Tap & Drill Full Bundle, UNC, UNF and Metric

  • 3 H.S.S. Tap & Drill Full Bundle for almost all cases..
  • 18 Pc H.S.S. Tap and Drill Set, Unf in Metal Box, 0001-0050.
  • 18 Pc Hss Tap and Drill Set, Metric, 0001-0052.
  • 18 Pc H.S.S. Tap and Drill Set, U.N.C, 0001-0040.
Check Stock

NORTOOLS Drill Tap HSS Combination Drill and Tap Set with 1/4 Inch Quick Change Adapter,6-32 to 1/4-20 Screw Tapping bit Tool

  • ...【Applicability】Drill tap bits set suitable for drilling tapping cutting on light metal aluminum board iron etc. Deburr/countersink also provided on bit beyond back taper. 4341 material is suitable for wood, aluminum, iron and other materials with lower hardness. The 6542 material has high hardness and is more durable, and can be applied to steel plates, even thinner 304 stainless steel plates of about 2mm..
  • ✅【High efficiency】 Complete hole drilling, tapping, durable and countersinking in one operation and greatly save processing steps and time costs, improve working efficiency. Recommended for use it on a tapping machine. Pay attention to the operation method when using the electric drill. Excessive shaking and tilting will affect the tapping and even break the tap..
  • ✅【QUALITY GUARANTEE】 We have carried out strict quality inspection and control on each drill tap bits set before leaving the factory, and the pass rate is above 99.99%. If you have any usage or quality problems, please feel free to contact us through Amazon..
Check Stock

6 Packs Titanium Combination Drill & Taps Bit Set SAE 6-32nc 8-32nc 10-32nc 10-24nc 12-24nc 1/4-20nc.

  • COMBINATION DRILL & TAP & COUNTERSINK- No more using a drill to drill the hole and then tapping it out later with another tool. All in one and works great and save a lot of time and trouble..
  • HANDY TOOLS – These drill tap bits are must have if you fabricate a lot.
  • you can use the in aluminum, plastic, and so on.
  • Go slow, once the tap is doing its thing, make sure not to strip the threads by bottoming it out..
  • HIGH VERSATILITY – Set of 6 drill tap bits in SAE sizes 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ¼-20NC, with 1/4inch hex quick-change shank, fit Electric hand drill, impact drill, bench drill, electric screwdriver and other tap machines..
  • EASY TO USE - Each tap drill is engraved with its size convenient for you to choose the suitable size with a glance. A tapered end on hex shank can prevent excessive knocks.
  • Back taper exceeds the tap to prevent over-drilling and damage to the thread..
  • WORRY-FREE – This Drill Tap Bits set comes with a portable storage case for convenient use and store. If you encounter any problems in using th....
Check Stock

wesleydrill Titanium Combination Tap Drill Bit Set 6 Pcs M3-M10 Screw Tapping Bit Multi-Function Bit Set Fit for Light Metal Aluminum Board Iron etc

  • [Specifications and packaging]: 6 Piece multi-function drill bit set.Include size:M3X0.5,M4X0.7,M5X0.8,M6X1,M8X1.25,M10X1.5..
  • [Fitment]: Tap drill bit set is a convenient hex shank drill tap bits set that can simultaneously complete hole drilling, tapping, deburring and countersinking.Suitable for drilling tapping cutting on light metal aluminum board iron etc..
  • [Material]: Thread drill bit set is made of HSS4341 (high-speed steel) +titanium coating for capability and durability..
  • [Advantage]: Drill tap bits set's 1/4 inch hex shank fits into power tools more easily and securely.When using M3-M6, the most suitable speed of the electric drill is 1200/sec, the M7-M10 is 1000/sec..
  • [Quick Replacement, One-Click Drilling]: Metric tap drill bits fast replacement composite cone uses drill edged principle Drilling and tapping in one, one-step processing, greatly save processing steps and time costs, improve working efficiency..
Check Stock

Hanson 1765531 Pts Drill Plus Tap Combo 6-32' Number 36 for Tap Die Extraction

  • This tap and drill set contains a convenient HCS tap and HSS drill bit.
  • Self-aligning taps start and thread straight virtually every time.
  • Great for through holes and irregular surfaces.
  • Plug taps are ideal for general purpose threading.
  • Special chip-breaking technology cuts chips easier.
Check Stock

AUTOTOOLHOME 6 Pack Titanium Combination Drill Tap Bit Set Screw Tapping SAE 6-32NC 8-32NC 10-24NC 10-32NC 12-24NC 1/4-20NC

  • Titanium Combination Drill taps are made of HSS 4341, which can ensure sharp, fast execution and retain strength and efficiency. The surface is treated with a titanium alloy, which greatly improves the cutting performance of the drill, is more wear-resistant and prolongs the service life..
  • Three in one operation provides hole drilling, tapping, deburring and countersinking for a quick and complete job on copper, brass, aluminum, sheet metal and plastic.
  • This tap set includes SAE , so it has high versatility. Each tap drill is engraved with a label, which is convenient for you to choose the size that suits you. The convenient ¼-inch (6.35mm) quick change hex shank has a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread..
  • 6pcs drill tap set including SAE- 6-32nc, 8-32nc, 10-24nc, 10-32nc, 12-24nc, 1/4-20nc.
  • Storage case is lightweight and durable for easy storage and is portable for all job environments.
Check Stock

6 Packs Combination Drill & Taps Bit Set, Screw Tapping in SAE Size 6-32nc 8-32nc 10-32nc 10-24nc 12-24nc 1/4-20nc with Anti-Rust Black Coating, 1/4” Hex Shank and Storage Case

  • COMBINE DRILL and TAP at the same time - All in one and works great and save a lot of time and trouble when doing threads for hinges or other projects.
  • No more using a drill to drill the hole and then tapping it out later with another tool..
  • HIGH VERSATILITY – Set of 6 drill tap bits in SAE sizes 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ¼-20NC, with 1/4inch hex quick-change shank, fit Electric hand drill, impact drill, bench drill, electric screwdriver and other tap machines..
  • HANDY TOOLS – These drill-tap bits are must have if you fabricate a lot.
  • you can use them in aluminum, plastic, wood and other thin soft material metal panel.
  • When you use it, make sure it is perfectly straight, take your time, go slow, use lubrication to prevent breaking the bit in the hole..
  • EASY TO USE - Each tap drill is engraved with its size convenient for you to choose the suitable size with a glance. A tapered end on hex shank can prevent excessive knocks.
  • Back taper exceeds the tap to prevent over-drilling and damage to the thread..
  • WORRY-FREE – This Drill Tap Bits set comes with a portable storage case for convenient use and store. If you encounter any problems in using the products, please feel free to contact us for satisfactory customer service..
Check Stock

Greenfield Threading 330088 Metric High Speed Steel Jobber Drill Plug Hand Tap Set (18-Piece Set)

  • Features：003cbr003e 1：Complete hole drilling, tapping, deburring and countersinking in one operation with power impact tool.003cbr003e 2：Back tapered beyond tap to prevent thread damage from over-drilling.003cbr003e.
  • 3：Made from high-speed steel, these combination drill and tap bits are designed to tap up to 10-gauge wood, plastic copper, brass, aluminum, sheet metal and other soft materials. They are not suitable for drill and tap in very hard metals..
  • 4:A perfect countersink drill bit set, a perfect tap and die set, two in one, one-step processing, greatly save processing steps and time costs, improve working efficiency..
  • 5:High speed steel construction provides extra durability to drill bits to perform multiple drilling operations while maintaining its strength..
  • 6:Self-centering point, do not need assistant center drilling or center punching..
Check Stock

ACETOP 6 Pcs Combination Tap Drill Bit HSS Titanium Coated 3-in-1 Metric Hex Speed Drill Thread Tap Set Spiral Screw Tapping Bit Tool for Drilling Tapping Countersinking, M3 M4 M5 M6 M8 M10, Gold

  • [Specifications and packaging]: 6 pcs multi-function drill tap bits.Include size: 6-32NC, 8-32NC ,10-32NC, 10-24NC, 12-24NC, 1/4-20NC..
  • [Fitment]: Hex shank tap drill bit set is a convenient hex shank drill tap bits set that can simultaneously complete hole drilling, tapping, deburring and countersinking.Suitable for drilling tapping cutting on light metal aluminum board iron etc..
  • [Material]: Drill tap bit set is a classic high speed steel structure + titanium coating..
  • [Advantage]: Combination titanium drill bit 1/4 inch hex shank fits into power tools more easily and securely..
  • [Quick Replacement, One-Click Drilling]: Thread drill bits fast replacement composite cone uses drill edged principle Drilling and tapping in one, one-step processing, greatly save processing steps and time costs, improve working efficiency..
Check Stock

Drill America 5/8'-18 Tap and 37/64' Drill Bit Kit, POU Series

  • Set contains high speed steel plug hand tap and matching high speed steel drill bit.
  • High speed steel plug hand threading tap is popular for use in general machine tapping or cnc tapping.
  • Black oxide drill bit is ideal for production, maintenance or portable drilling jobs.
  • 5/8"-18 hss plug tap and matching 37/64" hss 1/2" shank drill bit in plastic pouch.
Check Stock

Viking Drill and Tool by Norseman 57580 SP-18TD Type 20-UB Spiral Point Plug Style Magnum Super Premium Tap/Drill Set

  • 18 pc. Tap and Drill Set Premium High Speed Steel Spiral Point, NC.
  • Contains: #36, 29, 25, 21, 7, F, 5/16, U, 27/64, 6-32, 8-32, 10-24, 10-32, 1/4-20, 5/16-18, 3/8-16, 7/16-14, 1/2-13.
  • Set includes tap and corresponding drill bit.
Check Stock

YDLQWCZ Combination Drill Tap Bit 6-32nc 8-32nc 10-32nc 10-24nc 12-24nc 1/4-20nc Set of 6 Screw Tap Bit 1/4 Inch Hex Shank HSS Spiral Flute Tapping Tool Set Kit Deburr Countersink Bit

  • SAE and Metric Sizes - This drill tap kit includes SAE and metric sizes and is the most commonly used screw tapping. 6pc SAE includes: 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC and 1/4-20NC, including 6 metric: M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1.0, M8 x 1.25, M10 x 1.5..
  • Drill Tap Bits Set - Each tap drill has its corresponding size in the storage box, so you can choose the exact drill bit effortlessly. The 1/4" (6.35mm) hexagonal shank has a tapered end to prevent excessive knocking.The back taper exceeds the tap to prevent over-drilling and thread damage..
  • High Speed Steel 4341 Material - The surface of the titanium alloy combined drill bit is treated with titanium alloy, which effectively improves the cutting performance of the drill bit, is more wear-resistant, and prolongs the service life. Made of high-speed steel 4341, to ensure sharpness, speed, and maintain strength and efficiency..
  • Improve Efficiency - Drilling, tapping, deburring, and countersinking can complete the processing of copper, brass, aluminum, sheet metal, low carbon steel, and plastic at one time, improving work efficiency. Deepening the chip flute helps to remove the chips and debris on the tap, reducing friction and heat, so as to achieve a faster and colder drilling process..
Check Stock

Drill America - D/ACO44P12 #44 Cobalt Heavy Duty Drill Bit (Pack of 12), D/ACO Series

  • Set contains high speed steel plug hand tap and matching high speed steel drill bit.
  • High speed steel plug hand threading tap is popular for use in general machine tapping or cnc tapping.
  • Black oxide drill bit is ideal for production, maintenance or portable drilling jobs.
  • 4-36 hss plug tap and matching #44 hss drill bit in plastic pouch.
Check Stock