Categories

Best Dvault Dvcs0015

260 Brass Sheet Unpolished Mill Finish Half Hard Temper 0.001-0.015 Thickness 6 Width 12 Length Pack of 12

  • Assortment of 6" wide by 12" long sheets contains 1 each of the following thicknesses: 0.001", 0.0015", 0.002", 0.003", 0.004", 0.005", 0.006", 0.007", 0.008", 0.010", 0.012", and 0.015".
  • Made from a half hard, cold rolled, 260 alloy brass.
  • 0.001", 0.0015", 0.002", 0.003", 0.004", 0.005", 0.006", 0.007", 0.008", 0.010", 0.012", 0.015".
  • Used in applications where corrosion problems exist.
  • Excellent forming qualities and may be lightly drawn, blanked or stamped.
Check Stock

2 Pieces Steel Feeler Gauge Dual Marked Metric and Imperial Measuring Tool (32 Blades Feeler Gauge, 16 Blades Feeler Gauge)

  • Feeler gauge set: 2 pack feeler gauges, made of 65 manganese steel, the measuring feeler gauge has 32 blades thickness and 16 blades thickness.
  • Foldable, easy and convenient to take and store.
  • Easy identification: dual marked metric and imperial, 0.0015 inch/ 0.04 mm to 0.035 inch/ 0.88 mm, 0.0015 inch/ 0.04 mm to 0.02 inch/ 0.508 mm, the numbers of size are etched into feeler gauge for easy identification.
  • Metric sizes (mm): the 32 blades feeler gauge owns 0.04, 0.05, 0.06, 0.08, 0.10, 0.13, 0.15, 0.18, 0.20, 0.23, 0.25, 0.25, 0.28, 0.30, 0.33, 0.35, 0.38, 0.40, 0.43, 0.45, 0.48, 0.50, 0.53, 0.55, 0.58, 0.60, 0.63, 0.65, 0.70, 0.75, 0.80, 0.88.
  • The 16 blade feeler gauge owns 0.127, 0.152, 0.178, 0.203, 0.229, 0.254, 0.279, 0.305, 0.330, 0.356, 0.381, 0.406, 0.432, 0.457, 0.483, 0.508.
  • Inch sizes: the 32 blades feeler gauge owns 0.0015, 0.002, 0.0025, 0.003, 0.004, 0.005, 0.006, 0.007, 0.008, 0.009, 0.010, 0.010, 0.011, 0.012, 0.013, 0.014, 0.015, 0.016, 0.017, 0.018, 0.019, 0.020, 0.021, 0.022, 0.023, 0.024, 0.025, 0.026, 0.028, 0.030, 0.032, 0.035.
  • The 16 blade feeler gauge owns 0.005, 0.006, 0.007, 0.008, 0.009, 0.010, 0.011, 0.012, 0.013, 0.014, 0.015, 0.016, 0.017, 0.018, 0.019, 0.020.
  • Warm notice: there is some anti-rust oil on the stainless steel ....
Check Stock

VTurboWay 2 Pack 32 Blades Steel Feeler Gauge, Dual Marked Metric and Imperial Gap Measuring Tool, Teaching Feeler

  • 2 Pack, Made of 304 stainless steel, each measuring feeler gauge has 32 blades thickness.
  • dual marked metric and imperial, 0.0015 inch/ 0.04 mm to 0.035 inch/ 0.88 mm, Size dimensioned by etching, durable and non-fading.
  • Metric sizes (mm): 0.04, 0.05, 0.06, 0.08, 0.10, 0.13, 0.15, 0.18, 0.20, 0.23, 0.25, 0.25, 0.28, 0.30, 0.33, 0.35, 0.38, 0.40, 0.43, 0.45, 0.48, 0.50, 0.53, 0.55, 0.58, 0.60, 0.63, 0.65, 0.70, 0.75, 0.80, 0.88.
  • Inch sizes: 0.0015, 0.002, 0.0025, 0.003, 0.004, 0.005, 0.006, 0.007, 0.008, 0.009, 0.010, 0.010, 0.011, 0.012, 0.013, 0.014, 0.015, 0.016, 0.017, 0.018, 0.019, 0.020, 0.021, 0.022, 0.023, 0.024, 0.025, 0.026, 0.028, 0.030, 0.032, 0.035.
Check Stock

32 Blades Steel Feeler Gauge Dual Marked Metric and Imperial Measuring Tool

  • Feeler gauge set: made of 65 manganese steel, each measuring feeler gauge has 32 blades thickness.
  • Foldable feeler gauges, easy and convenient to take and store.
  • Easy identification: dual marked metric and imperial, 0.0015 inch/ 0.04 mm to 0.035 inch/ 0.88 mm, the numbers of size are etched into feeler gauge for easy identification.
  • Metric sizes (mm): 0.04, 0.05, 0.06, 0.08, 0.10, 0.13, 0.15, 0.18, 0.20, 0.23, 0.25, 0.25, 0.28, 0.30, 0.33, 0.35, 0.38, 0.40, 0.43, 0.45, 0.48, 0.50, 0.53, 0.55, 0.58, 0.60, 0.63, 0.65, 0.70, 0.75, 0.80, 0.88.
  • Inch sizes: 0.0015, 0.002, 0.0025, 0.003, 0.004, 0.005, 0.006, 0.007, 0.008, 0.009, 0.010, 0.010, 0.011, 0.012, 0.013, 0.014, 0.015, 0.016, 0.017, 0.018, 0.019, 0.020, 0.021, 0.022, 0.023, 0.024, 0.025, 0.026, 0.028, 0.030, 0.032, 0.035.
  • Warm notice: there is some anti-rust oil on the stainless steel feeler gauge to prevent it from rusty, please don’t worry about that.
Check Stock

Stainless Steel Feeler Gauge Measuring Tool Dual Marked Metric and Imperial Measuring (0.038-1.02 mm,25 Blades)

  • Feeler gauge set: made of 65 manganese steel, each measuring feeler gauge has 25 blades thickness.
  • Foldable feeler gauges, easy and convenient to take and store.
  • Easy identification: dual marked metric and imperial, 0.0015 inch/ 0.038 mm to 0.04 inch/ 1 mm, the numbers of size are etched into feeler gauge for easy identification.
  • Metric sizes (mm): 0.038, 0.127, 0.152, 0.178, 0.203, 0.229, 0.254, 0.279, 0.305, 0.330, 0.356, 0.381, 0.406, 0.432, 0.457, 0.483, 0.508, 0.533, 0.635, 0.686, 0.762, 1.
  • Inch sizes: 0.0015, 0.002, 0.003, 0.004, 0.005, 0.006, 0.007, 0.008, 0.009, 0.010, 0.011, 0.012, 0.013, 0.014, 0.015, 0.016, 0.017, 0.018, 0.019, 0.020,0. 021, 0.025, 0.027, 0.030, 0.040.
  • Warm notice: there is some anti-rust oil on the stainless steel feeler gauge to prevent it from rusty, please don’t worry about that.
Check Stock

CAMWAY 32PCS Blades Steel Feeler Gauge 0.0015-0.035 inch/ 0.04-0.88mm Dual Marked Metric and Imperial Gap Measuring Tool

  • 【Durable for Use】Constructed from hardened tempered steel with a lube oil coating to prevent pitting and corrosion..
  • 【Wide Application】Suitable for designers, engineers, mechanics to measure the thickness of tappet clearances, spark plugs gaps, bearing clearances, piston ring gaps and other hard to reach places..
  • 【Metric Sizes (mm)】0.04, 0.05, 0.06, 0.08, 0.10, 0.13, 0.15, 0.18, 0.20, 0.23, 0.25, 0.25, 0.28, 0.30, 0.33, 0.35, 0.38, 0.40, 0.43, 0.45, 0.48, 0.50, 0.53, 0.55, 0.58, 0.60, 0.63, 0.65, 0.70, 0.75, 0.80, 0.88..
  • 【Inch Sizes】0.0015, 0.002, 0.0025, 0.003, 0.004, 0.005, 0.006, 0.007, 0.008, 0.009, 0.010, 0.010, 0.011, 0.012, 0.013, 0.014, 0.015, 0.016, 0.017, 0.018, 0.019, 0.020, 0.021, 0.022, 0.023, 0.024, 0.025, 0.026, 0.028, 0.030, 0.032, 0.035..
  • 【Measuring Range】0.0015 inch/ 0.04 mm to 0.035 inch/ 0.88 mm.
Check Stock

Stainless Steel Feeler Gauge Dual Marked Metric and Imperial Measuring Tool (0.0015/0.04-0.025/0.635 mm, 26 Blades)

  • Feeler gauge set: made of 65 manganese steel, each measuring feeler gauge has 26 blades thickness.
  • Foldable feeler gauges, easy and convenient to take and store.
  • Easy identification: dual marked metric and imperial, 0.0015/ 0.04 - 0.025/ 0.635 mm, the numbers of size are etched into feeler gauge for easy identification.
  • Metric sizes (mm): 0.04 mm, 0.05 mm, 0.06 mm, 0.08 mm, 0.10 mm, 0.13 mm, 0.15 mm, 0.18 mm, 0.20 mm, 0.23 mm, 0.25 mm, 0.28 mm, 0.30 mm, 0.330 mm, 0.35 mm, 0.38 mm, 0.40 mm, 0.43 mm, 0.48 mm, 0.45 mm, 0.50 mm, 0.53 mm, 0.55 mm, 0.58 mm, 0.60 mm, 0.63 mm.
  • Inch sizes: 0.0015, 0.002, 0.0025, 0.003, 0.004, 0.005, 0.006, 0.007, 0.008, 0.009, 0.010, 0.011, 0.012, 0.013, 0.014, 0.015, 0.016, 0.017, 0.018, 0.019, 0.020, 0.021, 0.022, 0.023, 0.024, 0.025 inches.
  • Warm notice: there is some anti-rust oil on the stainless steel feeler gauge to prevent it from rusty, please don't worry about that.
Check Stock

Small Parts 16680 Precision Brand Carbon Steel 1008 Shim Stock Assortment Full Hard Temper AISI 1008/AISI 1010 ASTM A109 for Chemistry 0.001 0.0015 0.002 0.003 0.004 0.005 0.006 0.007 0.008 0.010 0.012 ,/0.015 Thick 6 Width 12 Length Pack of 12

  • Assortment of 6" wide by 12" long sheets contains 1 each of the following thicknesses: 0.001", 0.0015", 0.002", 0.003", 0.004", 0.005", 0.006", 0.007", 0.008", 0.010", 0.012", and 0.015".
  • Made from a full hard, cold rolled, low carbon 1008-1010 steel.
  • 0.001", 0.0015", 0.002", 0.003", 0.004", 0.005", 0.006", 0.007", 0.008", 0.010", 0.012", and 0.015".
  • Used in applications where hardness, flatness and accuracy are required.
  • Material can be punched or sheared with minimum burring and distortion.
Check Stock

Camshaft 84005207 for Briggs & Stratton 793880 793583 792681 791942 795102 Camshaft kit, Cam Replacement Kit with 795387 Oil Seal Ring and 697110 Crankcase Gasket

  • Reference Part Number: New high quality aftermarket replacement Camshaft for Briggs & Stratton 793880 84005207 793583 792681 791942 795102, Gasket replaces for 697110, Oil Seal replaces for 795387..
  • Fits Many Engine Models: Our Camshaft fits for most 215000 model Briggs & Stratton egine such as 215702-0015-E1/ 215702-0015-G1/ 215702-0110-B1/ 215702-0110-E1/ 215702-0110-E9/ 215702-0113-B1/ 215702-0113-E1/ 215702-0113-E9/ 215702-0115-B1/ 215702-0115-E1/ 215702-0116-B1/ 215702-0116-E1/ 215702-0116-E9/ 215702-0466-B1/ 215702-0466-E1/ 215702-0553-B1/ 215702-0578-B2/ 215702-0578-G2/ 215705-0119-B1/ 215705-0119-E1 4 cycle small engine camshaft..
  • Fits Many Engine Models: Brand new and top quality aftermarket cam replacement kit fit for 21R7 (10.5HP) / 21R8 (11.5HP) / 31R5 (13.5HP)/ 31R6 (14.5HP) / 31R7 (15.5HP) / 31R8 (16.5HP)/31R9 (17.5HP) / 33R7 (18.5HP) /33R8 (19HP) Intek model engines. Please Check your part number and our fitment before placing order. (The detailed fitment information is in product description below).
  • Package List: 1 Camshaft, 1 Gasket, 2 Connecting rods, 2 Oil seal rings, 1 Cleaning tool kit. (As picture shows).
  • Installation & Service: Direct replacement for a proper fit and easy installation, it's better to be installed by profession....
Check Stock

UPBRIGHT New USB 2.0 Data Cable Cord Compatible with WD My Book 1TB Drive WDBAAF0010HBK-01 WDBABV5000ABK-00 WDBAAU0015HBK WDH1U5000N WDBAAU0010HBK WDH1U7500N WDBAAF5000EBK eSATA Firewire Hard Drive

  • Tested Units. In Great Working Condition.UpBright 30 days money back guarantee. 1 full year service warranty..
  • UpBright NEW USB 2.0 Data Cable Cord Lead Compatible with WD MY BOOK 1TB DRIVE WDBAAF0010HBK-01 WDBABV5000ABK-00 WDBAAU0015HBK WDBAAU0010HBK WDBAAU0010HBK-0?1 WDH1U7500N WDH1U5000N WDBAAF5000EBK eSATA Firewire External Essential HDD Hard Drive.
  • Compatible with: WD MY BOOK 1TB DRIVE WDBAAF0010HBK-01 WDBABV5000ABK-00 Hard Drive.
  • WD 1TB My Book USB eSATA Firewire External.
  • WD My Book Essential WDH1U7500N WDH1U5000N WDBAAF5000EBK HDD.
  • WD My Book WDBAAU0015HBK WDBAAU0010HBK WDBAAU0010HBK-0?1 Hard Drive.
Check Stock

Precision Brand Carbon Steel 1008 Shim Stock Assortment Full Hard Temper AISI 1008/AISI 1010 ASTM A109 for Chemistry 0.001 0.0015 0.002 0.003 0.004 0.005 0.006 0.007 0.008 0.010 0.012 0.015 0.020 0.025 ,/0.031 Thick 6 Width 12 Length Pack of 15

  • 6" by 12" assortment contains 1 each of the following thicknesses: 0.001", 0.0015", 0.002", 0.003", 0.004", 0.005", 0.006", 0.007", 0.008", 0.010", 0.012", 0.015", 0.020", 0.025", and 0.031".
  • Made from a full hard, cold rolled, low carbon 1008-1010 steel.
  • 0.001", 0.0015", 0.002", 0.003", 0.004", 0.005", 0.006", 0.007", 0.008", 0.010", 0.012", 0.015", 0.020", 0.025", and 0.031".
  • Used in applications where hardness, flatness and accuracy are required.
  • Material can be punched or sheared with minimum burring and distortion.
Check Stock

2 Pack Feeler Gauge with 32/26 Blades and 1 Pack Offset Feeler Gauge with 16 Blades - Stainless Steel Feeler Gauge Dual Marked Metric and Imperial Gap Measuring Tool for Automotive Repair

  • Good Combination: The package includes 3pcs feeler gauges with different sizes, types and blades (32/26/16 Blades), this set includes the common sizes needed for jobs, you can choose the appropriate one that meets your needs.
  • Various Sizes: Metric and inch sizes etched on each blade. Feeler Gauge with 32 Blades (0.04 mm - 0.88 mm/0.0015 inch to 0.035 inch). Feeler Gauge with 26 Blades (0.04 mm - 0.63 mm/0.0015 inch to 0.025 inch). Offset Feeler Gauge with 16 Blades (0.127 mm - 0.508 mm/0.005 inch to 0.020 inch). Please refer to the pictures for size details.
  • User Friendly: Designed with the thumb notch, the chromed-blade protector and the lock nut, the feeler gauge set is foldable, convenient to take and store, and these blades are not easy to be lost and can be disassembled if you want to use one alone.
  • Multi-functional: Ideal for exactly measuring gap width or thickness. Suitable for designers, engineers and mechanics to measure the thickness of bearing clearances, spark plugs gaps, piston ring gaps and other places that are hard to reach.
  • Durable: Made of high quality 65 manganese steel, the feeler gauges are resistant to wear and have strong strength, and there is some oil on the feeler gauge set to prevent it from rusty.
Check Stock

Glarks 2 Pack Stainless Steel Feeler Gauge Set, 32 Blades 0.04-0.88 mm Dual Marked Metric and Imperial Gap Measuring Tool and 16 Blades Standard SAE and Metric Gap Width/Thickness Measuring Tool

  • ★【High Quality】: All the feeler gauge are made of high quality steel, heat processed with chrome finish, high strength, good resilience, elegant appearance. Surface polished smooth, applying anti-rust oil to prevent rust..
  • ★【Measuring Range】: 32pcs metric and imperial tool measuring range is 0.0015 Inch (0.04mm) to 0.035 Inch (0.88 mm), 16pcs standard SAE and metric feeler gauge measuring range is 0.0015 Inch 0.005 Inch(0.127) to 0.020 Inch ( 0.508 mm)..
  • ★【Easy to use】: Designed with a hole on each end, use screw for easy adjust and disassemble, from where you press the tooth gauge, you can easily rotate the blades, tools are contains a blade notch for easy blade removal, numbers are stamped clear for read..
  • ★【Wide Application】: They measure accurately and have almost no errors, will help you quickly and easily measure gap width/thickness. Suitable for designers, engineers, mechanics to measure the tappet clearances, spark plugs gaps, bearing clearances, piston ring gaps, guitars gaps, engines gaps, everything in between and other hard to reach places..
Check Stock