Categories

Best E1mg Sx Om

Cable Matters 2-Pack 1000BASE-SX SFP to LC Multi Mode 1G Fiber Transceiver Modular for Cisco Ubiquiti TP-Link Huawei Mikrotik Netgear and Supermicro Equipment

  • Connects a network switch, server, or NIC with SFP to a Gigabit fiber channel network with multimode LC for Network Attached Storage (NAS), Storage....
  • Compatible with MSA compliant equipment from Cisco, Ubiquiti, TP-Link, Huawei, Mikrotik, Netgear, Supermicro.
  • Low power consumption and low EMI emission design.
  • Hot-pluggable with advanced ESD protection.
  • Up to 550m transmission distance for 1000BASE-SX Gigabit Ethernet over fiber applications. Convenient and cost effective 2-pack for use in the data....
  • Compatible with both 62.5um and 50um LC cables. It supports OM1, OM2, OM3, and OM4 fiber cables.
Check Stock

1.25G SFP SX 1000Base-SX Multi-Mode Mini GBIC 850nm MMF 550m LC DOM Transceiver Module for Cisco GLC-SX-MMD GLC-SX-MM SFP-GE-S Ubiquiti UF-MM-1G Finisar D-Link Brocade and More

  • 100% Compatible-Independently Compatible for Cisco Brand 1.25 Gigabit Ethernet 1000BASE-SX standards, EEPROM data coding and writing to Cisco GLC-SX-MMD, Cisco GLC-SX-MM SFP-GE-S,GLC-SX-MM-RGD.
  • Wide Compatible-Dependently for Open Sources brand,including Ubiquiti, Netgear, Brocade E1MG-SX-OM, Unifi, Finisar FTLF8519F2XCL, Mikrotik, Trendnet, TP-link and Dlink DEM-311GT, Zyxel, Trendnet, Supermicro, Qnap, Linksys etc.
  • 1G SFP SX-1000BASE-SX 1.25Gbps SFP Mini-GBIC, multi-mode, mm, 850nm, [email protected], full duplex LC Hot pluggle, auto-negotiation, low power consumption, operation temperature range for 0 to 70°C (23 to 158°F). Support DDM , MSA compliant.
  • Easy to install-It supports real-time configuration, plug and play, hot pluggable sfp footprint. It doesn't require any setup or installation for either device. It greens up immediately and connects right away..
  • Reliable Assurance-All of our products have gained TUV, UL, CE, FCC, RoHS, REACH, FDA professional certifications.
  • tested by different projects,such as Temperature Cycling,Mechanical Vibration,ESD HBM,EMC,Cyclic Moisture Resistance and Fit&MTBF etc..
  • and programmed by various brands of the latest and advanced networking switches or other equipments to ensure the reliability..
Check Stock

PHOLSY C6 Timer Remote Control with Intervalometer Compatible with Canon EOSR EOSRP EOSR6 90D 250D 200D 850D SX50HS; for Olympus E-M1X E-M1-II E-M1-III E-M5-III; for Fuji GFX100 GFX50R XT3 XT4 XT30

  • ✔ Compatible with Canon EOS R7, EOS R10, EOS R6, EOS R, EOS RA, EOS RP, 850D, 90D, 80D, 70D, 77D, 60D, 60Da, 250D, 200D, 200DII, 100D, 800D, 760D, 750D, 700D, 650D, 600D, 550D, 500D, 450D, 400D, 1500D, 1300D, 1200D, 1100D, 1000D, 2000D, M5, M6, M6 Mark II.
  • PowerShot SX50HS, SX60HS, SX70HS, G1X Mark III, G1X Mark II, G1X, G3X, G5X, G10, G11, G12, G15, G16.
  • Rebel: XT, XTi, XS, XSi, T1i, T2, T2i, T3, T3i, T4, T4i, T5, T5i, T6, T6i, T7i, T8i, SL1 etc..
  • ✔ Compatible with Fujifilm GFX100, GFX100S, GFX50R, GFX50SII, GFX100 IR, X-Pro3, X-T3, X-T4, X-T30, X-T30II, X-A7, X-E1, X100V.
  • Olympus OM-D OM-1, E-M1X, E-M1 Mark II, E‑M1 Mark III, E-M5 Mark III.
  • Pentax 645Z, K-1 Mark II, K100D, K110D, K200D, K-500, K100D, K20D, K10D, K-30, K-50, K-7, K-5, K-5II, K-5IIs, K-3, K-3II, K-1.
  • Samsung GX-1L, GX-1S, GX-10, GX-20, NX100, NX11, NX10, NX5.
  • ✔ It sports an electric sound speaker, shutter release active lamp, interval timer, long exposure (it can use interval timer and long exposure simultaneously), self timer, TIME exposure and a release hold mechanism. Take photos without touching your camera and take pictures at regular intervals for time-lapse projects.
Check Stock

Timer Remote Shutter Release Intervalometer for Canon EOS R6, EOS R, EOS RA, EOS RP; for Fujifilm GFX100, GFX100S, GFX50R, X-Pro3, X-T4; for Olympus OM-D E-M1X, E-M1 Mark II, E‑M1 Mark III

  • ...places RS-60E3, Fujifilm RR-100 and Olympus RM-CB2. Compatible with Canon EOS R7, EOS R10, EOS R6, EOS R, EOS RA, EOS RP, 850D, 90D, 80D, 70D, 77D, 60D, 60Da, 250D, 200D, 200DII, 100D, 800D, 760D, 750D, 700D, 650D, 600D, 550D, 500D, 450D, 400D, 1500D, 1300D, 1200D, 1100D, 1000D, 2000D, M5, M6, M6 Mark II.
  • PowerShot SX50HS, SX60HS, SX70HS, G1X Mark III, G1X Mark II, G1X, G3X, G5X, G10, G11, G12, G15, G16.
  • Rebel: XT, XTi, XS, XSi, T1i, T2, T2i, T3, T3i, T4, T4i, T5, T5i, T6, T6i, T7i, T8i, SL1 etc..
  • Compatible with Fujifilm GFX100, GFX100S, GFX50R, GFX50SII, GFX100 IR, X-Pro3, X-T3, X-T4, X-T30, X-T30II, X-A7, X-E1, X100V.
  • Olympus OM-D OM-1, E-M1X, E-M1 Mark II, E‑M1 Mark III, E-M5 Mark III.
  • Pentax 645Z, K-1 Mark II, K100D, K110D, K200D, K-500, K100D, K20D, K10D, K-30, K-50, K-7, K-5, K-5II, K-5IIs, K-3, K-3II, K-1.
  • Samsung GX-1L, GX-1S, GX-10, GX-20, NX100, NX11, NX10, NX5.
Check Stock

FiberCablesDirect - 3M OM4 LC LC Fiber Patch Cable | 100Gb Duplex 50/125 LC to LC Multimode Jumper 3 Meter (9.84ft) | Length Options: 0.5M-300M | 10/40/100gb mmf sfp+ 100gbase dplx ofnr om4-lc-lc

  • ...the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding..
  • Optical Modality Details for OM4 Ethernet Over Multimode Fiber: 3500 / 4700 MHz-km Modal Bandwidth 850nm / 1300nm | Fast Ethernet 100Basw-FX 2000m | 1Gb (1000Mb) Ethernet 1000Base-SX 550m (Requires mode-conditioning patch cord) | 10Gb Ethernet 10GBase-SR 400m | 40Gb Ethernet 40GBase-SR4 150m (550m QSFP+ eSR4) | 100Gb Ethernet 100GBase-SR10 150m..
  • Fiber Network Bandwidth: 3600/500 MHz-km @850/1300 nm (OM4 – Optimized for 850nm VCSELs / higher speed)..
Check Stock

FiberCablesDirect - 2.5M OM4 LC LC Fiber Patch Cable | 100Gb Duplex 50/125 LC to LC Multimode Jumper 2.5 Meter (8.20ft) | Length Options: 0.5M-300M | 10/40/100gb mmf sfp+ 100gbase dplx ofnr om4-lc-lc

  • ...the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding..
  • Optical Modality Details for OM4 Ethernet Over Multimode Fiber: 3500 / 4700 MHz-km Modal Bandwidth 850nm / 1300nm | Fast Ethernet 100Basw-FX 2000m | 1Gb (1000Mb) Ethernet 1000Base-SX 550m (Requires mode-conditioning patch cord) | 10Gb Ethernet 10GBase-SR 400m | 40Gb Ethernet 40GBase-SR4 150m (550m QSFP+ eSR4) | 100Gb Ethernet 100GBase-SR10 150m..
  • Fiber Network Bandwidth: 3600/500 MHz-km @850/1300 nm (OM4 – Optimized for 850nm VCSELs / higher speed)..
Check Stock

FiberCablesDirect - 3M OM4 LC LC Fiber Patch Cable | Armored 100Gb LSZH Duplex 50/125 LC to LC Multimode Jumper 3 Meter (9.84ft) | Length Options: 0.5M-300M | 10/40/100g qsfp+ 100gbase mmf ofnr lc-lc

  • ...the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding..
  • Optical Modality Details for OM4 Ethernet Over Multimode Fiber: 3500 / 4700 MHz-km Modal Bandwidth 850nm / 1300nm | Fast Ethernet 100Basw-FX 2000m | 1Gb (1000Mb) Ethernet 1000Base-SX 550m (Requires mode-conditioning patch cord) | 10Gb Ethernet 10GBase-SR 400m | 40Gb Ethernet 40GBase-SR4 150m (550m QSFP+ eSR4) | 100Gb Ethernet 100GBase-SR10 150m..
  • Fiber Network Bandwidth: 3600/500 MHz-km @850/1300 nm (OM4 – Optimized for 850nm VCSELs / higher speed)..
Check Stock

FiberCablesDirect - 3M OM4 LC LC Fiber Patch Cable | Bend Insensitive Plenum 100Gb Duplex 50/125 LC to LC Multimode Jumper 3 Meter (9.84ft) | Length Options: 0.5M-300M | 10/40/100g mmf lc-lc om4-lc-lc

  • ...the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding..
  • Optical Modality Details for OM4 Ethernet Over Multimode Fiber: 3500 / 4700 MHz-km Modal Bandwidth 850nm / 1300nm | Fast Ethernet 100Basw-FX 2000m | 1Gb (1000Mb) Ethernet 1000Base-SX 550m (Requires mode-conditioning patch cord) | 10Gb Ethernet 10GBase-SR 400m | 40Gb Ethernet 40GBase-SR4 150m (550m QSFP+ eSR4) | 100Gb Ethernet 100GBase-SR10 150m..
  • Fiber Network Bandwidth: 3600/500 MHz-km @850/1300 nm (OM4 – Optimized for 850nm VCSELs / higher speed)..
Check Stock

FiberCablesDirect - 5M OM4 LC LC Fiber Patch Cable | 100Gb Duplex 50/125 LC to LC Multimode Jumper 5 Meter (16.40ft) | Length Options: 0.5M-300M | 10/40/100gb mmf sfp+ 100gbase dplx ofnr om4-lc-lc

  • ...ithin the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding..
  • Optical Modality Details for OM4 Ethernet Over Multimode Fiber: 3500 / 4700 MHz-km Modal Bandwidth 850nm / 1300nm | Fast Ethernet 100Basw-FX 2000m | 1Gb (1000Mb) Ethernet 1000Base-SX 550m (Requires mode-conditioning patch cord) | 10Gb Ethernet 10GBase-SR 400m | 40Gb Ethernet 40GBase-SR4 150m (550m QSFP+ eSR4) | 100Gb Ethernet 100GBase-SR10 150m..
Check Stock

FiberCablesDirect - 1M OM4 LC LC Fiber Patch Cable | Bend Insensitive Plenum 100G Duplex 50/125 LC to LC Multimode Jumper 1 Meter (3.28ft) | Length Options: 0.5M-300M | 10/40/100g mmf lc-lc om4-lc-lc

  • ...ithin the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding..
  • Optical Modality Details for OM4 Ethernet Over Multimode Fiber: 3500 / 4700 MHz-km Modal Bandwidth 850nm / 1300nm | Fast Ethernet 100Basw-FX 2000m | 1Gb (1000Mb) Ethernet 1000Base-SX 550m (Requires mode-conditioning patch cord) | 10Gb Ethernet 10GBase-SR 400m | 40Gb Ethernet 40GBase-SR4 150m (550m QSFP+ eSR4) | 100Gb Ethernet 100GBase-SR10 150m..
Check Stock

Canon EOS Rebel T7/2000D User Guide: The Most Complete Step by Step Manual to Mastering the Canon EOS Rebel T7/2000D Camera Settings and Updates with Useful Photography Tips & Tricks for Beginners

  • EOS-1V, EOS-3, EOS Rebel T7, T7i, T6s, T6i, T6, T5i, T5, T4i (650D), T3i (600D), T3 (1100D), T2i (550D), T1i (500D), XSi (450D), XTi (400D), XT (350D), XS (1000D), Contax N and 645..
  • ※ [Compatible cameras]: Canon Digital Rebel (300D), SL2 (200D), SL1 (100D), Elan series, PowerShot SX70 HS, SX60 HS, SX50 HS, G1 X Mark III, G1 X Mark II, G1 X, G3 X, G5 X, G10, G11, G12, G15, G16. Fujifilm: X30, X100T, X-E1, X-E2 and X-T1 Hasselblad: H series .Olympus: OM-D E-M1 Mark II. Pentax: K-1 Mark II, K10D, K20D, K100D, K110D, K200D, K-3, K-5, K-5 II, K-7, K30, K-50, K-500, *istDS, DS2, DS, DL2, DL, and D. Samsung: NX10 & NX100.
  • [Wireless and wired]: Wirelessly trigger your camera’s shutter, receiver can also be used as a wired shutter remote. The receiver needs to install 2 AAA (2 AAA not included in the package), the transmitter needs to install a CR2032 battery (included in the package)..
  • ※ [Multifunctional]: Support autofocus, single shot, time-lapse photography, continuous shooting mode and Bulb function. Replaces Canon RS-80N3 and RS-60E3..
  • ※ [Transmission distance]: 2.4GHz digital radio technology, strong anti-interference, up to 80m stable working distance..
Check Stock

Camera Remote Intervalometer Timer Wireless Shutter Compatible with Canon EOS R6, 850D, 90D, 80D, 70D, EOS R, EOS Ra, EOS RP; Replacement RS-60E3 Cable

  • Compatible with Canon EOS R6, EOS R, EOS Ra, EOS RP, 60Da, 250D, 200D, 200DII, 100D, 800D, 760D, 750D, 700D, 650D, 600D, 550D, 500D, 450D, 400D, 850D, 90D, 80D, 70D, 77D, 60D, 1500D, 1300D, 1200D, 1100D, 1000D, 2000D, M5, M6, M6 Mark II.
  • PowerShot SX50HS, SX60HS, SX70HS, G1X Mark III, G1X Mark II, G1X, G3X, G5X, G10, G11, G12, G15, G16.
  • Rebel: XT, XTi, XS, XSi, T1i, T2, T2i, T3, T3i, T4, T4i, T5, T5i, T6, T6i, T7i, T8i, SL1 etc..
  • Compatible with Fujifilm GFX100, GFX100S, GFX50S, GFX50R, X-H1, X-Pro3, X-Pro2, X-T4, X-T3, X-T2, X-T1, X-T30, X-T20, X-T10, X-T100, X-E3, X-E2S, X-E2, X-E1, X-A7, X-A5, X-A10, X100V, X100F, X100T, X70, X30, XF10.
  • Compatible with Olympus OM-D E-M1X, E-M1 Mark II, E-M1 Mark III, E-M5 Mark III..
  • Compatible with Pentax 645Z, K-1 Mark II, K100D, K110D, K200D, K-500, K100D, K20D, K10D, K-30, K-50, K-7, K-5, K-5II, K-5IIs, K-3, K-3II, K-1.
  • Samsung GX-1L, GX-1S, GX-10, GX-20, NX100, NX11, NX10, NX5.
  • 4 Modes for Shutter Release Control – S ( instant single shooting ), C ( continuous shooting ), B ( bulb exposure ) and 2S ( 2 seconds delay ).
  • 5 Settings for Timing Control – DELAY ( delay timer ), LONG ( long time exposure timer ), INTVL ( interval timer ),....
Check Stock

Camera Remote Control Wireless Shutter for Canon EOS RP, R6, ROS RP, Rebel T6, T7, T5, T3, SL2, 5D Mark II, 5d Mark iii, 5d Mark iv, 6D Mark II, 7d Mark ii, 7D Series, 5D Series; for Fujifilm X-T3

  • ...S-3, EOS Rebel T7, T7i (800D), T6s (760D), T6i (750D), T6 (1300D), T5i (700D), T5 (1200D), T4i (650D), T3i (600D), T3 (1100D), T2i (550D), T1i (500D), XSi (450D), XTi (400D), XT (350D), XS (1000D), Contax N and 645..
  • ※ [Compatible cameras]: Canon Digital Rebel (300D), SL2 (200D), SL1 (100D), Elan series, PowerShot SX70 HS, SX60 HS, SX50 HS, G1 X Mark III, G1 X Mark II, G1 X, G3 X, G5 X, G10, G11, G12, G15, G16. Fujifilm: X30, X100T, X-E1, X-E2 and X-T1 Hasselblad: H series .Olympus: OM-D E-M1 Mark II. Pentax: K-1 Mark II, K10D, K20D, K100D, K110D, K200D, K-3, K-5, K-5 II, K-7, K30, K-50, K-500, *istDS, DS2, DS, DL2, DL, and D. Samsung: NX10 & NX100.
  • [Wireless and wired]: Wirelessly trigger your camera’s shutter, receiver can also be used as a wired shutter remote. The receiver needs to install 2 AAA (2 AAA not included in the package), the transmitter needs to install a CR2032 battery (included in the package)..
  • ※ [Multifunctional]: Support autofocus, single shot, time-lapse photography, continuous shooting mode and Bulb function. Replaces Canon RS-80N3 and RS-60E3..
  • ※ [Transmission distance]: 2.4GHz digital radio technology, strong anti-interference, up to 80m stable working distance..
Check Stock