Categories

Best E404aluminum Welding Electrodes

Hobart H722844-RDP 1/8-Inch 4043 Aluminum Electrodes

  • These 1/8" x 14" Aluminum Electrodes are for 4043 aluminum welding for flat, horizontal and vertical applications.
  • Aluminum welding for flat, horizontal and vertical applications..
Check Stock

20 Sticks Aluminum Welding Rods ，20″*φ0.06″ Aluminum Brazing Rods Low Temperature 550℃/1022℉，Flux Core Welding Wire for Alu, Alu Alloy, Aluminum Repair

  • ... long 1/16″ x 20″ aluminum brazing rods. weight about 50g, longer size for your use. The lids at both ends can be opened for easy storage and portability..
  • 【Good Welding Fluidity】 Brazing temperature range: 716-752°F. Solidus: 716°F, Liquidus: 752°F. Tensile strength (RM): 130N/mm². aluminum brazing rods electrodes have good flow during welding and can flow into narrow gaps. The welding effect is completely flat..
  • 【Material】The low temperature aluminum welding rods. The composition of the solder: Si 12%, Mg≤0.10%, Fe≤0.80%, Cu≤0.03%, Zn≤0.20%, Mn≤0.15%, AL balance. Welding flux core 18%. for welding aluminum, aluminum alloys, aluminum-magnesium alloys and other white metals with high strength, good forgeability..
  • 【Wide Application】Aluminum welding rods for propane torch is suitable for leak welding of aluminum ship bottom, fuel tank, condenser.
  • crack repair of aluminum alloy engine block, base, gearbox, aluminum parts. Notice: It is not suitable for cast iron welding..
  • 【Quality Service】 When you encounter problems in the process of using the aluminum brazing rod, please contact us immediately, we will solve all problems for you. Looking forward to your suggestions for welding rods, we will continue to improve our product....
Check Stock

HUGEWELD Tig Welder TIG-200,HF TIG/Stick/Arc 2 in 1 TIG Welders,200 Amp 220V TIG Welding Machine,IGBT Inverter Portable Digital Display for Beginner

  • ✅【2 in 1 HF START】TIG200 is high frequency(HF) ignition, stable arc,simple to operate. The conversion efficiency of the whole machine is increased by more than 30%..
  • ✅【IGBT INVERTER】Use the single tube IGBT (the inverter frequency can reach 25-50KHz) to convert 50/60Hz to dc and then to high frequency and lower voltage,portable only 12.54 lbs, 13x6.3x11.4" size !.
  • ✅【2T & 4T 】2T(Manual) / 4T(Semi-auto) switch is available, you can release your finger for long time welding job when on 4T. 2T is suitable for the re-tack welding, transient welding or thin plate welding. 4T is suitable for welding medium thickness plates..
  • ✅【SAFETY and ENERGY SAVING】Automatic Compensation with Voltage Fluctuation, Over-voltage protection, Under Voltage Protection, Over Current Protection, Over Load Protection,Fan dormancy..
  • ✅【EXCELLENT WELDING PERFORMANCE】 Tig welding thickness 0.5-5.0mm under 10-200A output.
  • application of tungsten electrodes diameter: 1.0/1.6/2.0/2.4/3.0mm. Suitable for welding different metals such as steel, stainless steel, carbon steel etc. (Can’t weld aluminum). ARC welding thickness 2.0-8.0mm under 20-150A current , application of electrodes diameter: 2.5/3.2mm..
Check Stock

SÜA - Aluminum E4043 Stick Electrode Rod 3/32\ x 14\ - (1 Lb)

  • SÜA - E4043 is used for production or maintenance and repair welding on all weldable grades of aluminum sheets, plates, pipes, castings, and extrusions with a minimum of 3/32” thickness. Special extruded coating in this electrode is dense and without the air holes found in cheaper dip-coated electrodes and it provides a gas atmosphere to protect the arc..
  • ***READ THIS: The images are for reference only. Please check Picture #2 for an approximate quantity of electrodes per pound***.
  • Can be used as a SMAW-stick electrode or as an oxyacetylene brazing rod. Very easy to use with an exceptionally stable arc, operating at low amperages with a very minimal amount of spatter or fumes. Weld deposits are strong, dense, porosity-free with good color match and corrosion resistance. Good weldability.
  • rapid ignition and re-ignition, little splashing, easy removal of oxides, the characteristics of the joints are particularly good. Good capillary fluidity..
  • Commonly used on irrigation piping systems, refrigeration equipment, appliances, boat parts, ornamental aluminum parts, aluminum door or window frames, aluminum ladders, tanks, shelves, automotive, trucks or bus parts, machining errors, and building-up missing sections on castings, extrusions, and plates..
Check Stock

MARSWARE TIG Welding Tungsten Electrode 10-Pack Rod Rare Earth Blend Tri-Element Non-Radioactive 0.040 ×7 Ground Finish Arc Starts Easier and More Stable Purple EWG

  • 【Premium Quality Tungsten Electrodes】The tig welding tungsten electrodes rod is perfect for tig welding. Durable. Good conductivity. Arc starts easier and more stable. Hardness ensured..
  • 【High temperature-resistant, Non-melting】98% Tungsten, 1.0% Lanthanum, 0.5% Zirconium, and 0.5% Yttrium, non-radioactive. Annealed brittled for easier sizing. Melting point can reach 3,410 degrees Celsius. Conform to ANSI/AWS A5.12M/A5.12:2009 ISO 6848:2004 MOD..
  • 【A Wide Range of Suitable Base Metal Type】Good for stainless steel, copper alloys, carbon steel, nickel titanium, copper alloys, magnesium, aluminum and its alloys, etc..
  • 【Upgraded Vacuum Package】10 pcs 0.04''(1.0mm)×7''(175mm) ground finish tungsten electrodes. Anti-oxidation vacuum packaging. Ensure product quality and longer preservation time..
  • 【Worry-free Purchase】Selling directly from MARSWARE factory. Returnable within 30 days of receipt of shipment. Experienced and professional customer service team to help you solve any issue..
Check Stock

LONGEVITY Tigweld 200sx - 200 Amp AC DC Tig/Stick Welder with Digital Display 110v 200v

  • The unit features high frequency start tig and includes a foot pedal for great tig welding control and operation.
  • The stick welder operates on 110v and 220v volts and is capable of welding 7018, 6013, and other stick welding electrodes.
  • With the flip of a swtich, you are able to weld aluminum in AC mode. Features pre-flow, post flow, and clearance effect (balance) function for greater welding control.
  • Great machine for the hobbyist or professional with an easy to use panel. Excellent heat control.
  • Extemely portable weighing 37 lbs and easily carried to any job on site or offsite. The 110v adapter makes it easy to connect to a standard usa outlet..
Check Stock

E6013 - General Purpose/Mild Steel - Welding Electrode/Rod - 14" x 1/8" (PACK: 44 LB)

  • All-position, mild steel electrode for welding light to medium-gauge steel. Common uses include tack welding on thin sheet metal such as galvanized sheets, automobile bodies, metal furniture, window frames, fences, storage tanks, farm equipment and iron grills.
  • Excellent operating characteristics when using small diameter electrodes to weld thin sheet metal using lower open-circuit AC voltage.
  • One of the easiest electrodes to use because of its easy slag control in vertical down welding, its wide operating range and restrike capabilities.
  • This electrode has a soft, steady and quiet arc that produces very little smoke or spatter.
  • Select your Electrode Diameter and Package Quantity from the Options - Check Picture #3 for Welding Parameters..
Check Stock

Virego Handheld Welding Machine Gun | Handheld Welder Gun Portable ARC Welder Machine | 110V Voltage IGBT Digital MMA Welding Machine | Easy to Operate | with Folding Welding Helmet, Welding Gloves

  • WORRY-FREE AFTER-SALES: 100% Money Back Guarantee - For whatever reason, you are not satisfied, you can request a replacement or a full refund, you can contact us on the Amazon order page. Customer satisfaction is our tireless pursuit, we will show you the most sincere attitude and satisfactory solutions..
  • HANDHELD WELDER GUN: New design portable Arc Welder, handheld ARC welder is compact and portable, easy to carry, replace the traditional welder, say goodbye to the bulky luggage. Intelligent chip automatically identifies matching electrodes, easy to operate and use..
  • HANDHELD ARC WELDING MACHINE KIT: The kit includes 1 ARC welder, 1 welding ground wire, 1 folding welding helmet, 1 pair of welding gloves, 1 welding brush, 5 welding rod, 1 user manual and 1 storage bag. It can help you to complete various DIY projects easily..
  • BEST CHOICE: Handheld ARC Welder with powerful air intake and cooling, with efficient heat dissipation system to ensure long working hours. Great for hobbyists and novices..
  • WIDE RANGE OF APPLICATIONS: 110V voltage MMA welding is suitable for welding iron, stainless steel, aluminum, low carbon steel and other metal materials. The machine is small and portable, and it is more free to work at heights..
Check Stock

MARSWARE TIG Welding Tungsten Electrode Rod 2% Thoriated 3/32''×7'' (Red, WT20) 10-pack Ground Finish Arc Starts Easier and More Stable

  • 【Premium Quality Tungsten Electrodes】：The tig welding tungsten electrodes rod is perfect for tig welding. Durable. Good conductivity. Arc starts easier and more stable. Hardness ensured..
  • 【High temperature-resistant, Non-melting】：2% Thoriated. Annealed brittled for easier sizing. Melting point can reach 3,410 degrees Celsius. Conform to ANSI/AWS A5.12M/A5.12:2009 ISO 6848:2004 MOD..
  • 【A Wide Range of Suitable Base Metal Type】：Good for Stainless steel, carbon steel, nickel titanium, copper and its alloys, etc..
  • 【Upgraded Vacuum Package】：10 pcs 3/32''(2.4mm)×7''(175mm) ground finish tungsten electrodes. Anti-oxidation vacuum packaging. Ensure product quality and longer preservation time..
  • 【Worry-free Purchase】: Selling directly from MARSWARE factory. Returnable within 30 days of receipt of shipment. Experienced and professional customer service team to help you solve any issue..
Check Stock

bestarc TIG Welding Tungsten Electrode 2% Thoriated 3/32' x 7' (3/32'', Red)

  • 2% Thoriated Tungsten Electrodes for TIG Welding (Red WT20).
  • Good effect of welding stainless steel, adequate for DC welding.
  • Wide application range, suitable for welding stainless steel / carbon steel / copper / iron / nickel and other metals.
  • Longer storage time, sealed vacuum packaging to avoid oxidation.
Check Stock

TIG Welding Tungsten Electrodes, 2% Lanthanated Tungsten Electrodes, 1/16\ x 7\

  • TIG welding Tungsten electrodes 2.0% Lanthanated (Blue WL20).
  • Good welding effect of stainless steel / iron / carbon steel.
  • Using DC welding, lower amperage required.
  • A pack of 10-pcs, vacuum packaging, not easy to oxidize.
Check Stock

WeldingCity 10-pk Premium TIG Welding Tungsten Electrode Rod 2.0% Thoriated Red EWTh20 3/32 x 7 | 10-pcs

  • Pack of 10-pcs premium TIG welding Tungsten electrodes 2.0% Thoriated. AWS Classification: EW-Th2 (Red). Conform to ANSI/AWS Standard A5.12M/A5.12:2009 ISO 6848:2004 MOD..
  • Higher current range and stability. Better arc starts with lower tendency to spit. Medium erosion. Increased resistance to weld pool contamination..
  • Available Tungsten electrode diameters: 0.040" (0.5mm), 1/16" (1.6mm), 3/32" (2.4mm), 1/8" (3.2mm) and 5/32" (4.0mm).
  • 10-pcs/box Tungsten electrodes (2.0% Thoriated EW-Th2) with quantity discount. Buy More Save More!.
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

WeldingCity 10-pk Premium TIG Welding Tungsten Electrode Rod Pure Green EW-P 3/32 x 7 | 10-pcs

  • 10-pcs premium TIG welding Tungsten electrodes pure (Tungsten >99.5%). Electrode diameter available: 0.040" (0.5mm), 1/16" (1.6mm), 3/32" (2.4mm), 1/8" (3.2mm) and 5/32" (4.0mm).
  • AWS Classification: EW-P (Green). Conform to ANSI/AWS Standard A5.12M/A5.12:2009 ISO 6848:2004 MOD. Ground annealed..
  • Better stability when used with alternating current. Lower current-carrying capacity and tends to spit at higher current. May balls easily. Low cost. Usually used for non-critical welds only..
  • 10-pcs/box Tungsten electrodes (Pure EW-P). With quantity discount. Buy More Save More!.
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock