Categories

Best Earth friendly Filament

CDMZJJ PLA 3D Printer Filament, 1.75mm 3D Printing Consumables Bundle 1KG/2.2lb, 0.25KG/Spool 4 Colors Pack - Black, Blue, White, Red

  • 4 in 1 Bundle 3D Printer Filament: Comes with 1KG/2.2lb 3D printer filament with 4 most popular colors: blue, black, white, red. 4 spools in one package, packed in vacuum sealed bag, each spool filament net weight is 0.25KG/0.55lb..
  • Dimensional Accuracy & Consistency: PLA 3D Printer Filament, 1.75mm in diameter, Minimum demission tolerance +/- 0.02mm to ensure consistent feeding and smooth printing..
  • Premium PLA Filament: Eco-friendly and low odor, tangle-free, clog-free, bubble-free, melt well and feed smoothly, perfect 3D Printer PLA filament for smooth and stable 3D printing experience, provides excellent surface finish of printed parts..
  • Wide Compatibility: 1.75mm diameter printing filament, works perfectly with diverse 3D printers and 3D printing pens that use 1.75mm filament on the market..
  • 3D Printer PLA Filament Using Tips: Recommended printing temperature: 200?-230?. Recommended printing speed: 50-100mm/s for better printing results..
Check Stock

SUNLU 250g PLA Filament 1.75mm Bundle, 3D Printer Filament, Dimensional Accuracy +/- 0.02 mm, 0.25 kg Spool, 8 Rolls,Black+White+Grey+Burly Wood+Purple+Blue Grey+Grass Green+Pure Yellow

  • 【Say Goodbye to Poor 3D Printing by Wet Filament】Wet 3d printing filament will caused to stringing, clogging, poor adhesion, and Layer Shift. SUNLU FDM 3D Filament Dryer Enclosure can drying while printing to improve your 3D model, reducing the impact of the objective environment on the printing of 3d filaments..
  • 【Personalized Temperature Setting】The user can adjust the temperature of the drying box according to different 3d filament type, ambient temperature, humidity and other factors. Adjustable temperature range 35℃~55℃. Suitable for more than 20 kinds of 3d printing filament commonly used in the market.
  • 【Personalized Drying Time Setting】 The default continuous drying time of the drying box is 6 hours, and you can also manually set the drying time. The time setting range is 0~24 hours. Commonly used 3D filament on the market under normal circumstances only need 3-6 hours of drying to achieve a good printing experience and printing effect..
  • 【Compatible with 99% of 3D Filament Spools】A: Maximum capacity of SUNLU dry box is Φ210*85(H)mm. B: Compatible with all the mainstream 3D filament brands SUNLU, GEEETECH, ERYONE, ESUN, AMAZON BASIC etc..
  • C: Works perfectly with all standard filament diameters 1.75mm/2.85mm/3.00mm..
Check Stock

SainSmart PLA 3D Printer Filament,Toughness Enhanced PLA,Dimensional Accuracy +/- 0.03 mm, 1 KG Spool, 1.75 mm, White

  • Recommended Extrusion/Nozzle Temperature: 200 - 240 °C.
  • Recommended Bed Temperature: 60 - 80 °C.
  • High Strength PLA+ Filament has excellent machinal properties when compared with general PLA filament, its impact resistance is 4 times the standard one, tensile strength 1.5 times and elongation at break even 10 times. In combination with its resistance to temperature up to 68 °C (154°F), this PLA+ filament is a great fit for functional use..
  • Quality raw materials that eliminate impurities and bubbles, enabling smooth and effective filament feeding without jamming and warping..
  • With filaments well-wound onto the spool and a +/- 0.03 mm dimensional accuracy, what you got is a tangle-free filament that delivers smooth and consistent performance..
  • This PLA filament is an odorless and environmentally-friendly, plus with its ease of printing, making it your all-around, everyday budget filament..
Check Stock

Inland PLA PRO (PLA+) 3D Printer Filament 1.75mm - Dimensional Accuracy +/- 0.03 mm - 1 kg Spool (2.2 lbs) – Fits Most FDM/FFF Printers – Odor Free, Clog Free 3D Printing Filaments - Natural

  • PLA PLUS FILAMENT SPECS: 1 KG (approximately 2.20 lbs) Per Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
  • PLA PLUS FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 205°C - 225°C (401°F - 437°F), Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • INLAND PLA PLUS FILAMENT: Designed with the highest quality and compatibility in mind, Inland PLA+ Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dry and vacuum sealed with desiccant to ensure a high-quality, smooth print..
  • EASY-TO-USE: Inland PLA+ filament melts evenly and feeds smoothly into your 3D Printer creating defined corners with minimal warping and no odor. Produce your best print with our no-clog, bubble-free filaments. Inland filament can be used with most 1.75MM FDM and FFF 3D Printers. To keep your filament tangle-free, do not let go of the filament on the spool! Always hold the spool and filament tightly, do not allow your filament to spring back..
  • HIGH-QUALITY PLA PLUS: PLA+ filament is non-toxic, environment-friendly, a....
Check Stock

PETG Filament Enotepad PETG Filament 1.75mm for 3D Printer 1KG Spool 2.2lbs Dimensional Accuracy + / - 0.02 mm PETG Black

  • [About Enotepad PETG Filament] PETG Filament produce in strictly procedures, strong adhesion, no bubbles, ultra smooth technology, low odor, provide....
  • [Dimensional Accuracy and Consistency] 3D PETG filament 1.75mm with strict tolerance, dimensional accuracy + / - 0.02 mm. Advanced CCD diameter....
  • [Compatible with 99% FDM 3D Printer & 3D pen] Enotepad PETG Filament fits for most FDM 3d printers and 1.75mm 3d pen on the market. The wide....
  • [100% Vacuum-sealed Packaging] Use vacuum-sealed packaging bag for packaging PETG filament to keep the humidity percentage at a minimum and....
  • [What You Get] PETG Filament 1 KG, Friendly Customer Service, and 12 Months Warranty. If you have any questions about our 3D PETG Filament, you can....
Check Stock

Inland PLA Plus (PLA+) 3D Printer Filament 1.75mm - PLA Pro Dimensional Accuracy +/- 0.03 mm - 1 kg Spool (2.2 lbs) – Fits Most FDM/FFF Printers – Odor Free, Clog Free 3D Printing Filaments - White

  • PLA PLUS FILAMENT SPECS: 1 KG (approximately 2.20 lbs) Per Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
  • PLA PRO FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 205°C - 225°C (401°F - 437°F), Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • INLAND PLA + FILAMENT: Designed with the highest quality and compatibility in mind, Inland PLA+ Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dry and vacuum sealed with desiccant to ensure a high-quality, smooth print..
  • EASY-TO-USE: Inland PLA+ filament melts evenly and feeds smoothly into your 3D Printer creating defined corners with minimal warping and no odor. Produce your best print with our no-clog, bubble-free filaments. Inland filament can be used with most 1.75MM FDM and FFF 3D Printers. To keep your filament tangle-free, do not let go of the filament on the spool! Always hold the spool and filament tightly, do not allow your filament to spring back..
  • HIGH-QUALITY PLA PLUS: PLA+ filament is non-toxic, environment-friendly, and c....
Check Stock

Inland PLA Plus (PLA+) 3D Printer Filament 1.75mm - PLA Pro Dimensional Accuracy +/- 0.03 mm - 1 kg Spool (2.2 lbs) – Fits FDM/FFF Printers – Odor Free, Clog Free 3D Printing Filaments - Olive Green

  • PLA PLUS FILAMENT SPECS: 1 KG (approximately 2.20 lbs) Per Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
  • PLA PRO FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 205°C - 225°C (401°F - 437°F), Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • INLAND PLA + FILAMENT: Designed with the highest quality and compatibility in mind, Inland PLA+ Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dry and vacuum sealed with desiccant to ensure a high-quality, smooth print..
  • EASY-TO-USE: Inland PLA+ filament melts evenly and feeds smoothly into your 3D Printer creating defined corners with minimal warping and no odor. Produce your best print with our no-clog, bubble-free filaments. Inland filament can be used with most 1.75MM FDM and FFF 3D Printers. To keep your filament tangle-free, do not let go of the filament on the spool! Always hold the spool and filament tightly, do not allow your filament to spring back..
  • HIGH-QUALITY PLA PLUS: PLA+ filament is non-toxic, environment-friendly, and c....
Check Stock

Inland PLA Plus (PLA+) 3D Printer Filament 1.75mm - PLA Pro Dimensional Accuracy +/- 0.03 mm - 1 kg Spool (2.2 lbs) – Fits Most FDM/FFF Printers – Odor Free, Clog Free 3D Printing Filaments - Black

  • PLA PLUS FILAMENT SPECS: 1 KG (approximately 2.20 lbs) Per Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
  • PLA PRO FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 205°C - 225°C (401°F - 437°F), Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • INLAND PLA + FILAMENT: Designed with the highest quality and compatibility in mind, Inland PLA+ Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dry and vacuum sealed with desiccant to ensure a high-quality, smooth print..
  • EASY-TO-USE: Inland PLA+ filament melts evenly and feeds smoothly into your 3D Printer creating defined corners with minimal warping and no odor. Produce your best print with our no-clog, bubble-free filaments. Inland filament can be used with most 1.75MM FDM and FFF 3D Printers. To keep your filament tangle-free, do not let go of the filament on the spool! Always hold the spool and filament tightly, do not allow your filament to spring back..
  • HIGH-QUALITY PLA PLUS: PLA+ filament is non-toxic, environment-friendly, and c....
Check Stock

SUNLU 3D Printer Filament Dryer, FilaDryer S2 Storage Dry Box for 3D Printing, 360° Surround Heating, Large-Size Touch Screen, Remove Moisture from Wet Filaments, Spool Holder, Black

  • ①【Rescue Poor Printing】Newest SUNLU FDM 3D Filament Dryer S2 is more efficient to solve stringing, clogging, poor adhesion, poor printing quality and layer shift of 3d printing filament caused by ambient humidity..
  • ②【360°Embracing Heating】The 3D filament dry box S2 has added upper and lower heating plates to achieve all-round surrounding heating and rapid drying, breaking through the heating temperature to 35℃~70℃..
  • ③【Large-size Touch Screen】New 3.42*2.87inch touch screen, tablet-like operation experience. One-key switching between ℃ and ℉. According to various filament, user-friendly one-key recommended temperature setting..
  • ④【Real-time Humidity Detection】Built-in high-precision humidity detection sensor, displaying real-time humidity inside the filament dryer. Assist to judge the drying effect.Automatic sleep standby after drying..
  • ⑤【High Filament Compatibility】Compatible with all the mainstream 3D filament brands and all standard filament diameters 1.75mm/2.85mm/3.00mm.
  • Works perfectly with PLA、PLA+、PETG、TPU、ABS etc，Including high-end filament PA、PC..
Check Stock

PLA Filament 1.75mm 3D Printer Filament PLA 3D Printing 1KG Spool Dimensional Accuracy +/- 0.02mm Black

  • ¡¾1.75MM Diameter ¡À0.02mm, Smoothly Printing¡¿ JAYO PLA filament made of premium PLA raw material, advanced CCD diameter measuring and....
  • ¡¾Strong Adhesion, Low Odor¡¿ JAYO PLA filament produce in strictly procedures, no bubbles, ultra smooth technology, low odor, provide you a....
  • ¡¾100% Vacuum Packaging¡¿ Good vacuum packing ensures the filament are dry and in good toughness, not easy to break..
  • ¡¾Compatible with 99% FDM 3D Printer¡¿ JAYO PLA filament 1.75mm works perfectly on 99% FDM 3D printers, because most DIY printers use 1.75mm in....
  • ¡¾12 Months Warranty & Friendly After-Sales Service¡¿ N.W 1KG PLA, welcome guide, 12 months warranty, and friendly after-sales service. Let¡¯s....
Check Stock

HATCHBOX PETG 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Orange

  • 【PETG Filament - Advantages 】 IEMAI PETG filament combine the advantages of PLA and ABS, it’s strong and durable, with high purity, low shrinkage and excellent adhesion, which makes your printing more delicate. The storage hole is designed to place the end of the filament to prevent tangling. Eco-friendly and odor-free..
  • 【PETG Filament 1.75mm - Clarity & Light Transmission 】Color :Transparent blue.
  • Tolerances: +/- 0.02 mm, 1 kg spool (2.2lbs).Our PETG Transparent offers excellent clarity, light transmission (in the translucent colors) and high gloss. NOTE: The light transmission of prints can be influenced by infill, thickness and varying size of printed the objects..
  • 【3D Printer Filament - Vacuum Packaging 】 Completely dried for 24 hours before packaging. IEMAI use vacuum-sealed bag for packaging 1.75mm petg filament to keep the humidity percentage controlled and at a minimum to maintain excellent printing performance..
  • 【PETG Filament 1.75 - No Tangle and Easy to Use】 Full mechanical winding and strict manual examination, which guarantee the PETG filaments tidy and easy to be fed. IEMAI PETG Spool is more stronger and can achieve very strong and sturdy prints..
  • 【3D Printing Filament - Print Smoothly】No clogging, ....
Check Stock

JAYO 3D Printer Filament Dryer Box,Printing Filament Dry Box for Filament Drying and Storage,Dehydrator of Filament,3D Printing Filament Holder Compatible with 1.75mm,2.85mm,3.00mm Filament 1kg Spool

  • ➽JAYO Filament Dryer and Storage Box: JAYO 3D printer filament dryer dry filament, which helps you reduce the impact of the objective environment on....
  • ➽Personalized Time and Temperature Setting: The default continuous drying time of the JAYO filament dryer is 6 hours at 50℃. The time range and....
  • ➽User-friendly Design: JAYO dryer is made up of a transparent lid, a white bottom, a 2-inch LCD screen(display temperature and time), 2 built-in....
  • ➽Compatible with most 3D Filament Spools: Most widely used filament often requires 3-6 hours of drying to achieve a good printing experience and the....
  • ➽Partner for 3D Printer Filament: JAYO filament dryer box keeps heating up to your preset temperature and works until up to the preset time with the....
Check Stock

Creality Ender Series- PLA 3D Printer Filament 1.75mm Upgrade Stronger Toughness Printing Consumables Dimensional Accuracy ± 0.03 mm 1 KG 2.2 LBS

  • 【Elongation at Break is Increased by 10%】Creality Ender Series Upgrade Filament, The Imported raw material upgrades with stronger toughness. It is....
  • 【Consistent Filament Diameter with Small Tolerance】The diameter tolerance of the filament is an important index. The tolerance of 1.75mm Ender-....
  • 【High Purity Raw Material with Green and Degradable】Extracted from corn grains, raw materials are friendly and healthy. The filament has no....
  • 【Smooth Feeding and No Plug】The customized proportioning scheme, Ender- PLA filament has better tensile strength and ductility. Smoother fluidity....
  • 【Creality Official Brand Worry-free After-sales】Good vacuum packing ensures the filament is dry, easy to store, and use. Whenever or why, when....
Check Stock