Categories

Best Earth friendly Filament Spool

Inland PLA 3D Printer Filament 1.75mm - Dimensional Accuracy +/- 0.03mm - 1kg Cardboard Spool (2.2 lbs) – Fits Most FDM/FFF Printers – Odor Free, Clog Free Filaments - Black

  • PLA FILAMENT SPECS: 1 KG (approximately 2.20 lbs) Per Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
  • PLA FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 215°C - 230°C (419°F - 446°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • INLAND PLA FILAMENT: Designed with the highest quality and compatibility in mind, Inland PLA Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dried and vacuum sealed with desiccant to ensure a high-quality smooth print..
  • EASY-TO-USE: The Inland PLA filament melts evenly and feeds smoothly into your 3D Printer creating defined corners with minimal warping and no odor. Produce your best print with our no-clog, bubble-free filaments. The Inland filament can be used with most 1.75MM FDM and FFF 3D Printers. To keep your filament tangle free do not let go of the filament on the spool! Always hold the spool and filament tightly, do not allow your filament to spring back..
  • NEW CARDBOARD SPOOL: PLA filament is non-toxic and comes with a cardboard spool. PLA....
Check Stock

Inland PLA 3D Printer Filament 1.75mm - Dimensional Accuracy +/- 0.03mm - 1kg Cardboard Spool (2.2 lbs) – Fits Most FDM/FFF Printers – Odor Free, Clog Free Filaments - Purple

  • PLA FILAMENT SPECS: 1 KG (approximately 2.20 lbs) Per Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
  • PLA FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 215°C - 230°C (419°F - 446°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • INLAND PLA FILAMENT: Designed with the highest quality and compatibility in mind, Inland PLA Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dried and vacuum sealed with desiccant to ensure a high-quality smooth print..
  • EASY-TO-USE: The Inland PLA filament melts evenly and feeds smoothly into your 3D Printer creating defined corners with minimal warping and no odor. Produce your best print with our no-clog, bubble-free filaments. The Inland filament can be used with most 1.75MM FDM and FFF 3D Printers. To keep your filament tangle free do not let go of the filament on the spool! Always hold the spool and filament tightly, do not allow your filament to spring back..
  • NEW CARDBOARD SPOOL: PLA filament is non-toxic and comes with a cardboard spool. PLA....
Check Stock

Inland 1.75mm ABS 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm - 1kg Cardboard Spool (2.2 lbs) - Fits Most FDM/FFF Printers - Black

  • ABS FILAMENT SPECS: 1 KG (approximately 2.20 lbs) Per Cardboard Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
  • ABS FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 240°C - 260°C (464°F - 500°F) Recommended Bed Temperature: 80°C - 110°C (176°F - 230°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • INLAND ABS FILAMENT: Designed with the highest quality and compatibility in mind, Inland ABS Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! ABS is made from durable thermoplastic and is utilized for prints that are frequently handled, dropped, or in may be stored in high temperatures such as phone cases, sport camera mounts, toys, tools, electrical enclosures etc..
  • EASY-TO-USE: The Inland ABS filament melts evenly and feeds smoothly into your 3D Printer creating defined corners, creating a durable, strong print. Produce your best print with our no-clog, bubble-free filaments. The Inland filament can be used with most 1.75MM FDM and FFF 3D Printers. To keep your filament tangle free do not let go of the filament on the spool! Always hold the spool and filament tightly, do....
Check Stock

Inland 1.75mm ABS 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm - 1kg Cardboard Spool (2.2 lbs) - Fits Most FDM/FFF Printers - Orange

  • ABS FILAMENT SPECS: 1 KG (approximately 2.20 lbs) Per Cardboard Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
  • ABS FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 240°C - 260°C (464°F - 500°F) Recommended Bed Temperature: 80°C - 110°C (176°F - 230°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • INLAND ABS FILAMENT: Designed with the highest quality and compatibility in mind, Inland ABS Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! ABS is made from durable thermoplastic and is utilized for prints that are frequently handled, dropped, or in may be stored in high temperatures such as phone cases, sport camera mounts, toys, tools, electrical enclosures etc..
  • EASY-TO-USE: The Inland ABS filament melts evenly and feeds smoothly into your 3D Printer creating defined corners, creating a durable, strong print. Produce your best print with our no-clog, bubble-free filaments. The Inland filament can be used with most 1.75MM FDM and FFF 3D Printers. To keep your filament tangle free do not let go of the filament on the spool! Always hold the spool and filament tightly, do....
Check Stock

Inland 1.75mm ABS 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm - 1kg Cardboard Spool (2.2 lbs) - Fits Most FDM/FFF Printers - Green

  • ABS FILAMENT SPECS: 1 KG (approximately 2.20 lbs) Per Cardboard Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
  • ABS FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 240°C - 260°C (464°F - 500°F) Recommended Bed Temperature: 80°C - 110°C (176°F - 230°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • INLAND ABS FILAMENT: Designed with the highest quality and compatibility in mind, Inland ABS Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! ABS is made from durable thermoplastic and is utilized for prints that are frequently handled, dropped, or in may be stored in high temperatures such as phone cases, sport camera mounts, toys, tools, electrical enclosures etc..
  • EASY-TO-USE: The Inland ABS filament melts evenly and feeds smoothly into your 3D Printer creating defined corners, creating a durable, strong print. Produce your best print with our no-clog, bubble-free filaments. The Inland filament can be used with most 1.75MM FDM and FFF 3D Printers. To keep your filament tangle free do not let go of the filament on the spool! Always hold the spool and filament tightly, do....
Check Stock

Inland 1.75mm ABS 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm - 1kg Cardboard Spool (2.2 lbs) - Fits Most FDM/FFF Printers - Blue

  • ABS FILAMENT SPECS: 1 KG (approximately 2.20 lbs) Per Cardboard Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
  • ABS FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 240°C - 260°C (464°F - 500°F) Recommended Bed Temperature: 80°C - 110°C (176°F - 230°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • INLAND ABS FILAMENT: Designed with the highest quality and compatibility in mind, Inland ABS Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! ABS is made from durable thermoplastic and is utilized for prints that are frequently handled, dropped, or in may be stored in high temperatures such as phone cases, sport camera mounts, toys, tools, electrical enclosures etc..
  • EASY-TO-USE: The Inland ABS filament melts evenly and feeds smoothly into your 3D Printer creating defined corners, creating a durable, strong print. Produce your best print with our no-clog, bubble-free filaments. The Inland filament can be used with most 1.75MM FDM and FFF 3D Printers. To keep your filament tangle free do not let go of the filament on the spool! Always hold the spool and filament tightly, do....
Check Stock

SUNLU 250g PETG Filament 1.75mm Bundle, 3D Printer Filament, Toughness PETG Filaments, Dimensional Accuracy +/- 0.02 mm, 0.25 kg Spool, 8 Rolls, Black+White+Grey+Transparent+Blue+Green+Red+Orange

  • ① 【Super Neat Filament Spool】SUNLU 3D printer filament product line is equipped with an excellent self-developed neat winding device, 100% neat rate, no clogs, making filament easier to use..
  • ②【SUNLU PLA 3D Printer Filament】PLA filament is the most basic, the most used filament, no clogs, no bubbles, no tangle, SUNLU PLA filament has good layer adhesion, very easy to use..
  • ③【1.75mm Filament Diameter】Dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, making it suitable for almost all 1.75mm FDM 3D printers..
  • ④【Filament Spool Diameter】Spool Diameter: 8.00″, Spool Width: 2.50″, Spool Hub Hole Diameter: 2.20″. The size of the SUNLU filament spool is suitable for hanging on a lot of FDM 3D printers..
  • ⑤【Recommend Settings】We recommend printing the PLA filament at nozzle temperature of 200-230°C, bed temperature of 50-65°C, and printing speed of 50-100mm/s..
Check Stock

Fused Materials PVA 3D Printer Filament, 1.75mm, 1kg roll - Dissolvable Filament - Water Soluble Filament for 3D Printers and 3D Pens

  • PREMIUM PVA: Our professional grade filament ensures better dissolvability, stronger toughness, smoother printing, no bubbles, no warping, and a pleasant tangle-free experience. ROHS and CE certified..
  • DISSOLVABLE FILAMENT - Fused Materials PVA is a water-soluble filament used with dual extruder 3D printers to print support structures, molds, complex shapes and more!.
  • OPTIMIZED FOR PLA – Fused Materials PVA was designed to be a user-friendly dissolvable material and works best with many common materials such as PLA..
  • VACUUM SEALED: Fused Materials PVA is comes packaged in a vacuumed resealable mylar pouch with an added desiccant to preserve the filament quality. When the filament is not in use, easily reseal the bag to prevent dust build up and moisture buildup..
  • TECHNICAL SPECIFICATIONS: Consistent Diameter - +/- .03mm dimensional accuracy. Spool Diameter: 8" - Spool Width: 2.5" - Spool Hub Hole Diameter: 1.50.
  • 1 kg spool (2.2lbs). Recommended extrusion/nozzle temperature 190°C - 220°C, bed 50-80℃. Works perfectly with all common 1.75mm FDM 3D printers..
Check Stock

SUNLU ASA Filament 1.75mm UV/Rain/Heat Resistant Tough 3D Printer Filament Great for Printing Outdoor Functional Mechanical Parts 1kg Spool 2.2lbs 395 Meters Red

  • ① 【SUNLU ASA 3D Filament】ASA filament is kind of very strong and tough filament, stronger than PLA filament and ABS filament. No clog, no....
  • ②【Super Neat Filament Spool】Spool Diameter: 8.00", Spool Width: 2.50", Spool Hub Hole Diameter: 2.20". The size of the SUNLU filament spool is....
  • ③【1.75mm Filament Diameter】Dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, it's suitable....
  • ④【Recommend Settings】We recommend printing at a nozzle temperature of 230-260°C(446-500°F), bed temperature of 80-120°C(176-248°F), printing....
  • ⑤【UV/Rain/Heat Resistant】SUNLU ASA 3D printing filament is great for printing outdoor functional mechanical parts, UV/Rain/Heat highly....
Check Stock

Inland Tough PLA 3D Printer Filament 1.75 mm – Tougher Than PLA+ - Dimensional Accuracy +/- 0.03 mm - 1 kg Spool (2.2 lbs) – High Impact Strength- Black

  • TOUGH PLA FILAMENT PRINT SETTINGS: 1 KG (approximately 2.20 lbs) Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm) Recommended Extrusion/Nozzle Temperature: 210 °C - 230 °C (410 °F - 446 °F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • INLAND TOUGH PLA FILAMENT: Designed with the highest quality and compatibility in mind, Inland Tough PLA Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dried and vacuum sealed with desiccant to ensure a high-quality smooth print..
  • EASY-TO-USE: Inland Tough PLA filament is as easy to use as regular PLA, but has higher impact resistance. Tough PLA is engineered for strength and durability and is often compared to ABS for its mechanical characteristics. Produce your best print with our no-clog, bubble-free durable Tough PLA. The Inland filament can be used with most FDM and FFF 3D Printers..
  • HIGH-QUALITY TOUGH PLA: The Tough PLA is non-toxic and tightly wound on its cardboard spool. To keep your filament tangle free do not let go of the filament on the spool! Alwa....
Check Stock

NovaMaker PLA 3D Printer Filament, Silver PLA Filament 1.75m, PLA 1kg Spool(2.2lbs), Dimensional Accuracy +/- 0.03mm

  • ✅【Risk-Free Service】One-month free trial, Lifetime Quality Promise and Money Return Service if you’re not entirely satisfied. Professional printing advice from technique support team make sure your prints SMOOTH & STABLE with excellent adhesion..
  • ✅【Best Quality PLA Filament】Made by USA virgin PLA material with best performance and Eco-friendly, Clog-Free, Bubble-Free & Easy-to-use. Ensure Diameter 1.75mm + / - 0.03 mm..
  • ✅【Tangle-Free Tips】1KG Silver PLA Filament dried 24 hours before packaging and vacuum sealed with nylon bag. To Avoid being Tangled, Filament should be fix into Spool Holes after Every Time Use..
  • ✅【Printing Tips】Recommended Printing Temperature 190°C - 220°C, Bed 30°C - 60°C. PLA Spool Diameter: 7.8" - Spool Width: 2.6" - Spool Hub Hole Diameter: 2.1"..
  • ✅【Cost-effective & Wide Compatibility】Manufacturer NovaMaker has over 8years 3D filament R&D experiences, and produce all kinds of filaments in large scale with premium quality, which contribute to 3d filament cost-effective and reliable for all common 1.75mm FDM 3D printers, such as Creality, MK3, Ender3, Prusa, Monoprice, FlashForge etc..
Check Stock

SUNLU ABS Filament 1.75mm Black Bundle of 5kg ABS 3D Printer Filament Dimensional Accuracy +/- 0.02 mm,1KG per Spool Total 5 KGs/5 Spools

  • 【1.75mm Filament Diameter】Dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, it's suitable....
  • 【Filament Spool Diameter】Spool Diameter: 8.00", Spool Width: 2.50", Spool Hub Hole Diameter: 2.20". The size of the SUNLU filament spool is....
  • 【PETG Filament Advantages】SUNLU PETG strong filament has many advantages: Clog Free, Bubble Free, Tangle Free, Warping Free, Stringing Free, Easy....
  • 【Combining PLA and ABS】SUNLU PETG filament combines the advantages of both PLA 3D printer filament and ABS 3D printer filament, ease to use like....
  • 【Recommend Settings】We recommend printing at a Nozzle/Extrusion temperature of 235°C - 245°C (455°F - 473°F) and Bed/Platform temperature of....
Check Stock

NovaMaker PETG 3D Printer Filament 1.75 - Black 1.75mm PETG Filament, PETG 1kg Spool(2.2lbs), Dimensional Accuracy +/- 0.03mm.

  • ✅【Risk-Free Service】One-month free trial, Lifetime Quality Promise and Money Return Service if you’re not entirely satisfied. Professional printing advice from technique support team make sure your prints SMOOTH & STABLE with excellent adhesion..
  • ✅【Best Quality PETG Filament】Made by USA virgin PETG material with best performance and Eco-friendly, Clog-Free, Bubble-Free & Easy-to-use. Ensure Diameter 1.75mm + / - 0.02 mm..
  • ✅【Tangle-Free Tips】Black PETG Filament dried 24 hours before packaging and vacuum sealed with desiccants in nylon bag. To Avoid being Tangled, Filament should be fix into Spool Holes after Every Time Use..
  • ✅【Printing Tips】Recommended Prting Temperature 230°C - 250°C, Bed 70°C - 80°C. PETG Spool Diameter: 7.8" - Spool Width: 2.6" - Spool Hub Hole Diameter: 2.1"..
  • ✅【Cost-effective & Wide Compatibility】Manufacturer NovaMaker has over 8years 3D filament R&D experiences, and produce all kinds of filaments in large scale with premium quality, which contribute to 3d filament cost-effective and reliable for all common 1.75mm FDM 3D printers, such as Creality, MK3, Ender3, Prusa, Monoprice, FlashForge etc..
Check Stock