Categories

Best Eastwood Abrasive Blaster

Eastwood Replacement Power Transformer and Main Switch Box for B20 Media Blast Cabinet and 20161

  • Replacement Transformer And Switch For Eastwood Blast Cabinet.
  • This Is The Power Transformer And The Main Switch Box Assembly That Fits Eastwood Abrasive Media Blast Cabinets.
  • Attaching The Wrong Wires To The Wrong Switch Lugs Will Burn Out The Circuitry In The Fluorescent Lamp.
Check Stock

Eastwood Dustless Liquid Media Blaster Brass Blast Gun Assembly 4 Mm Nozzle Installed Double Pick Boron Carbide Nozzle Up Tube Reinforced Clear Vinyl Suction Hose Quick Car Cleaning

  • With All The Dangerous Solvents, Strippers And Other Chemicals Available To Clean Your Car'S Parts, Sometimes All That'S Needed Is Water And Some High Pressure..
  • The Eastwood Liquid Media Blaster Is Specifically Designed To Use High Pressure Water From A Gas-Powered Pressure Washer As A Source For Powerful Dust-Free Abrasive Blasting To Tackle Tough Cleaning Jobs Without The Use Of Elbow Grease.
  • 23 in. [7M] X 1/2 in. [1.27Mm] I.D. Reinforced Clear Vinyl Suction Hose.
  • 3/8 in. Male Quick-Disconnect, High Pressure Water Fitting.
  • The Pressure Washer Must Be Capable Of Delivering A Minimum Of 3.5 Gpm For Adequate Performance. Less Water Volume Will Not Provide Sufficient Force To Allow The Blaster To Adequately Remove Rust And Or Paint..
Check Stock

Eastwood O Ring Gasket for Dual Soda Abrasive Blaster Replacement Fill Cap

  • O-Ring Gasket Replacement For Eastwood Soda.
  • Replacement Fill Cap Gasket For Eastwood Blasters .
  • O-Ring Gasket Replacement For Eastwood Abrasive Blasters.
Check Stock

JEGS 81305 Dual Tank Abrasive Soda Blaster 10 Gallon 100 lb. Abrasive Capacity o

  • 100 lb. Abrasive Capacity or 75 lb. Soda Media Capacity per….
  • Switch Between Various Grits of Media or Combine Them JEGS 81305 Dual Tank Abrasive Soda Blaster offers an easy quick change media valve that allows you to go from paint removal to blasting rust in just minutes. The dual 10 gallon tanks each hold up to 100 lbs. of media that can be mixed to achieve the best blend for just about any project.JEGS Dual Abrasive Soda Blaster….
Check Stock

Eastwood Blast Cabinet Foot Pedal Operating System and Gun | Precise Control Sandblaster Gun and Pedal Kit | Works with Virtually Any Abrasive Blast Cabinet | Volume Blast Media Gun Kit

  • ...he foot pedal eliminates hand fatigue and adds more precise control to the blast media flow. By using this kit, you can blast for longer periods of time without having to take breaks due to hand fatigue, meaning each project will take less time overall..
  • BEST USE: The Eastwood Blast Cabinet Foot Pedal System is designed to replace the standard trigger operated blast gun in the Eastwood Blast Cabinets. The Foot Pedal eliminates hand fatigue and adds more precise control to the blast media flow..
  • EASTWOOD QUALITY: Eastwood offers solutions which combines our 4,000+ unique products with the know-how to “Do The Job Right”. With an In-house product design, development and testing and a strong track record of high-quality, innovative products. Used and trusted by top builders to beginners and also provides a Lifetime Tech Support..
  • SAFETY INFORMATION: Blasting emits abrasive under pressure. Adequate respiratory eye and body protection must be worn during use. Inhalation of silica based media particles have been known to cause cancer and other deadly diseases, and must be avoided. Wear NIOSH approved respiratory protectio....
Check Stock

Sand Blaster Gun Kit,Portable Handy Sand Blasters,Sand Blaster Gun kit for air Compressor, for Cleaning Rust, Dirt, Paint, & Glass Etching DIY Projects.

  • ...minum Oxide beads, glass, and walnut shells etc.Can also be used with water to flush the car or tend the garden etc.For large areas of rust and other dirt, it can be used together with a pressured can blaster runs..
  • [FAST THROUGH MATERIAL] : Wet sand blaster gun kit can go through material quick, as is the nature of abrasive blasting. Pressurized compressed air powerfully accelerates gravity fed abrasive media through 5.0mm 2-15/16” x 7/32” DIA nozzle to cover greater surface profile.Sand blaster gun kit for wood is so much easier to use for particular scenarios with faster, more precise control of media flow..
Check Stock

Sand Blaster Gun Kit,Portable Handy Sand Blasters,Sand Blaster Gun kit for air Compressor, for Cleaning Rust, Dirt, Paint, & Glass Etching DIY Projects, Black.

  • ...minum Oxide beads, glass, and walnut shells etc.Can also be used with water to flush the car or tend the garden etc.For large areas of rust and other dirt, it can be used together with a pressured can blaster runs..
  • [FAST THROUGH MATERIAL] : Wet sand blaster gun kit can go through material quick, as is the nature of abrasive blasting. Pressurized compressed air powerfully accelerates gravity fed abrasive media through 5.0mm 2-15/16” x 7/32” DIA nozzle to cover greater surface profile.Sand blaster gun kit for wood is so much easier to use for particular scenarios with faster, more precise control of media flow..
Check Stock

Eastwood 8 Ft Replacement Double Sewn Wall Pressure Blaster Hose for Pressure Abrasive Blaster

  • 8 in. Inch Long Replacement Blast Hose For Your Pressure Blaster.
  • 1/2 in. Inside Diamter By 8 in. Foot Length Double-Sewn-Wall Pressure-Blaster Hose.
Check Stock

Pit Bull TAIA0255 Ceramic Sand Blasting Nozzles, 5 Piece

  • Replacement Window Liners For Eastwood Abrasive Media Blast Cabinet.
Check Stock

ALC Soda and Abrasive Blaster - 75-Lb. Capacity, Model Number 40003SB

  • The pressurized design of this heavy duty abrasive blaster delivers 30% more blasting power than siphon units..
  • Air consumption: 6 CFM @ 60 PSI, 25 CFM @ 125 PSI.
Check Stock

Tool Daily Pressure Washer Sandblasting Kit, Wet Sand Blaster Attachment, 5000 PSI, 1/4 Inch Quick Disconnect

  • Orifice 3.5. Minimum Flow Rate: 3 GPM. Minimum Pressure: 3000 PSI. Please check image 4 to choose the size of orifice. If you need orifice 2.5, please order “Tool Daily Pressure Washer Sandblasting Kit, Wet Sand blaster Attachment, 2500 PSI”..
  • The pressure washer sandblasting attachments have a goggle, 10’ hose, 16’’ pressure washer wand (water input), 17’’ sand wand (sand input) and two hose clamps..
  • Replacment Nozzles are available. Product “Tool Daily Pressure Washer Sandblasting Nozzle, Replacement Wet Sand blaster Attachment, 5000 PSI, 2-Pack”. Working pressure of pressure washer sand blaster attachment is up to 5000 PSI. Temperature is up to 140°F/60℃..
  • Application: pressure washer sand blaster kit works for abrasive cleaning. Great for removing rust, graffiti, paint, baked on grease..
  • Pressure washer sand blasting attachments use dry silica sand, baking soda or washed and dried river sand..
Check Stock

Portable Sandblaster Gun & Soda Blaster: Handheld, Gravity-Feed Abrasive Blaster with Gloves, Goggles, Nozzle (SUPER-FUNNELING TECHNOLOGY)

  • BETTER FLOWING SANDBLASTER: Unlike most sandblasters that have issues with abrasive flow, SandblasterINFO provides a gravity feed hopper so abrasive can not only be siphoned, but be forced down with gravity..
  • LESS FRUSTRATION, BETTER CONTROL: Now you can get the job done fast with less setup while blasting with a smooth, consistent flowing stream of abrasive. Say goodbye to clogging issues and lugging around heavy sandblast equipment..
  • PORTABLE SAND BLASTER DESIGN: This is a perfect size for most small to medium size sandblasting projects. Use with all types of abrasive such as soda blast, walnut, plastic, glass beads, coal slag, garnet, aluminum oxide, silicon carbide and other media..
  • SUPER-FUNNELING TECHNOLOGY: Unlike competitors, our UPGRADED DESIGN utilizes an improved design which allows better funneling of abrasive. Easily adjust the knob to control the abrasive to air ratio for a desired blast rate..
  • Clean Rust, Paint or Etch! BONUS Kit: Includes nozzle, googles, gloves + Ebook on Sandblasting 101. 100% Money Back Guarantee..
Check Stock

Tool Daily Pressure Washer Sand Blasting Kit, Wet Sandblaster Attachment, 2500 PSI, 1/4 Inch Quick Connect

  • Wet sand blaster for pressure washer is suction-fed injection of sand into water system..
  • Working pressure of pressure washer sand blaster attachment is up to 2500 PSI. Orifice 2.5. Max flow rate: 2 GPM. Temperature is up to 140°F/60℃. Please check image 6 to choose the size of orifice. If you need orifice 3.5 or orifice 3.0, please order “Tool Daily Pressure Washer Sandblasting Kit, Wet Sandblaster Attachment, 5000 PSI”..
  • The pressure washer sand blasting attachments have a goggle, 10’ hose, 16’’ pressure washer wand (water input), 10’’ sand wand (sand input) and permanent nozzle (output)..
  • Application: pressure washer sand blaster kit works for abrasive cleaning. Great for removing rust, graffiti, paint, baked on grease..
  • Pressure washer sand blasting attachments use dry silica sand, baking soda or washed and dried river sand..
Check Stock