ASZLBYM 3/8\ Lathe Threading Turning Tool Holder SER1010H11 with Indexable Carbide Threading Turning Insert 11ER A60 (3/8\ Holder + 11ER A60 Insert)
- PACKAGE INCLUDES : You will receive 1 pieces SER1010H11 3/8”/10mm shank diameter lathe turning tool holder , 11pcs 11ER A60 threading carbide turning inserts and 1pc T8 wrench..
- Material : The SER1010H11 3/8” metal lathe cutting tool holder material is 40Cr steel, it has the characteristics of durability, sturdiness and stability, and good anti-rust performance. The 11ER A60 threading turning inserts material is carbide, and the coating is Nanostructured TIAIN, It has good toughness, wear resistance and high temperature resistance, the carbide insert can uesd for processing steel..
- Turning tool holder size : Shank Diameter ( length×width ) : 3/8"*3/8"(10mm*10mm).
- Threading carbide turning insert :Processing : 60°general thread insert, processing pitch range: 0.5mm - 1.5mm..
- Easy to store: the metal lathe cutting turning tool holder and threading carbide turning inserts are packed in a plastic container, safe and easy to store, please rest assured to buy!.
Check StockUrbansential Woodturning Bowl Gouge Set, 3 Pieces 22.5 inch Wood Lathe Turning Tools, 1/4 Flute, 3/8 and 1/2 with High Speed Steel Blades, Beech Handles Brass Ferrules, in Wooden Storage Case
- Easy wood turning on your lathe with Savannah Carbide Turning tools. The Savannah Large Carbide Turning Tools are designed with ease of use in mind. It is ideal for wood turners of all skill levels and helps ensure success right from the start. The Savannah Carbide turning tools eliminate the need for sharpening of your turning tools since it features a rotatable cutter head..
- All you have to do is rotate the the cutter head for a clean, sharp edge and continue turning. The solid carbide stays sharper for a longer period of time in comparison to steel tools. Once the cutter head is completely used, simply replace it with a new carbide cutter..
- To make turning even more enjoyable, the shaft of the Savannah Carbide Turning Tool also features a flat back for stability while your turning. The solid wood ash handle is coated with a comfortable rubber grip on the base that transitions to the wooden top part of the handle seamlessly..
- The comfortable rubber grip helps reduce hand fatigue while turning. Handle length is approximately 13-1/2” from the end to the stainless steel ferrule. With the Savannah Large Carbide Turning Tool, you can get right to turning without all the fuss..
- Set includes the Large Round (# 7537), Square (# 7538) and Diamond (# 7539....
Check StockAccusize Industrial Tools 1\ 9 Pieces/Set, Indexable Carbide Turning Tools and Boring Bar, 2988-0001
- Package includes: you will receive 4 pieces SCLCR06 lathe boring bar turning tools holders, including a S07K-SCLCR06, a S08K-SCLCR06, a S10K-SCLCR06 and a S12M-SCLCR06, 10 pieces CCMT0602, metal indexable turning insert blades, sufficient quantity and easy to replace.
- Quality material: lathe boring bar turning tools holder are made of quality cemented carbide and tungsten steel.
- The cemented carbide material makes the turning tool durable and adaptable.
- Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
- Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
- cutting angle is 95 degree, cutting direction is right hand.
- Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
- Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
- Tight impact bolts, simple structure, often applied for small hole processing.
- Note: due to the slight color change of manu....
Check StockPro Grind Sharpening System For Lathe Turning Tools, Chisels, Skews, Gouges, Bowl Gouges, Spindle Gouges and More. Includes the Multi-Grind Jig for Gouges, Slotted Platform and Tool Rest
- Easy wood turning on your lathe with Savannah Carbide Turning tools. We all know how "enjoyable" sharpening our turning tools can be. We also know that if you don't have the tool at just the right angle when turning, the results can be undesirable. With the Savannah Carbide Mini Turning Tool Set you can eliminate the inconvenience of sharpening your turning tools and with the flat bottom bars on each tool you’ll be able to easily turn most any type of project!.
- When the carbide cutter on the tool finally dulls, simply loosen the cutter screw, rotate the tip and secure the screw for a fresh, clean cutting edge. Carbide cutters will stay sharper longer when compared to standard turning tools. However, once needed, the cutters are replaceable. This set includes 2 of each cutter style and extra screws..
- Unlike standard wood turning tools, when using carbide tipped cutters, you keep the cutter straight in on the object you are turning. This produces a shearing action as opposed to the traditional cutting method of standard turning tools. The shearing action of this type of turning produces much cleaner cuts and is easier than using standard turning tools..
- Each mini turning tool has a Flush Fit Comfort Grip handle. Each handle is approx. 9-1/8" long a....
Check StockThe Lathe Of Heaven
- The VINWOX Carbide Turning Tools are designed with ease of use in mind. It is ideal for wood turners of all skill levels and helps ensure success right from the start. The VINWOX Carbide Lathe Tools eliminate the need for sharpening of your turning tools since it features a rotatable cutter head. Start your easy wood turning on your Wood Lathe with VINWOX Carbide Turning tools now.
- Including One set Replaceable Carbide Tip Insert installed on chisel. Rougher: 11.1x11.1x1.75mm 4 sided Square Shape Carbide Tip. Finisher: 12mm Diameter Round Shape Carbide Tip. Detailer: 28x10mm Diamond shape Carbide Tip. Peach Square Radius: 11.3x11.3x1.75mm with 4 sided 2" Arc Square Radius Carbide Tip. Blade images on product picture are only for Clear Vision..
- 1/2/3/4 Indexed Carbide tip design always offer sharpest edge for turning and maximum cutting life.
- Top quality and Long cutting life Guaranteed.
Check StockLathe Tools, 18.6inch Full Size Carbide Lathe Wood Turning Tools with Rougher Finisher Swan Neck Solid Handles for Beginner Experienced Turners to Work on Lathe
- UNSTOPPABLE - Carbide lathe tools are becoming popular these days. They are easy to use, stay sharp for a long time, and the cutter swaps out in a few seconds when it becomes dull, you can get right to turning without all the fuss.
- ERGONOMIC GRIP - Turning tools with a wood handle for the toolbar, The comfortable rubber grip helps reduce hand fatigue while turning, allows long time working, Vibration-absorbing toolbar, improve the surface finish of the workpiece.
- EASY TO USE - Very simplified learning by turning, no complicated angles to learn and remember, for all skill levels, woodworking or DIY enthusiasts. Whether you're a beginner or an experienced turner, you'll get great results from our Carbide Turning Tools.
- SUITABLE FOR - Suitable for massive and small events, along with cards, Decorative items, sheets, and boxes. Unlike fluffing, you will find that the Rougher is a great method for forming the external area of the jar and transforming the particles on the rotor.
- OUR TURNING SYSTEM INCLUDES - (1) 11.4 '' wood shank, (3) 7.2 '' shafts with 8 carbide cutting heads of the circle, square and diamond, carbide tipped and a T15 wrench, all packed in a presentation storage box.
Check StockBelfCare Patient Turning Device – Elderly Assistance Products for Disabled Patients Transfer – Waterproof PU Leather Lift Assist for Elderly Pillow
- The Optimal Solution: Whether you are a professional physician or you have an elderly person in care, the BelfCare patient turning device is a life saver when it comes to turning your patient and attending to his needs, such a diaper changing, massaging, body cleaning, or exercising..
- Easy Patient Turning: This pillow with arms goes under the patient’s knees for offering support while the rounded side allows an easy turning or the legs. Keep a hand on the patient’s waist or back and one hand on the pillow handle and roll simultaneously for quick turning in just a few seconds..
- Highest Quality Materials: Our roll pillow for elderly is made with high-quality soft PU leather, which is eco-friendly, skin-friendly and very soft for more comfort. The interior high-density sponge ensures increased support and it’s hard to deform even after repeated use..
- Excellent Support: The BelfCare pillow is an excellent solution for patient lift for home, as not only makes turning easier but also provides support and promotes a comfortable position, that can help reduce numbness, inflammation and improve circulation..
- Minimal Maintenance: Thanks to the smooth surface of the PU leather our patient lift aid pillow is made of, cleaning and washing are so much easier. Th....
Check StockIndexable Lathe Turning Tool,16mm Shank 7 Pieces Carbide Turning Tool Set,Mental Lathe Tools Holder with Portable Case,for Turning Grooving Threading with Tin Coated Carbide Inserts.
- Package includes: you will receive 4 pieces SCLCR06 lathe boring bar turning tools holders, including a S07K-SCLCR06, a S08K-SCLCR06, a S10K-SCLCR06 and a S12M-SCLCR06, 10 pieces CCMT0602, metal indexable turning insert blades, sufficient quantity and easy to replace.
- Quality material: lathe boring bar turning tools holder are made of quality cemented carbide and tungsten steel.
- The cemented carbide material makes the turning tool durable and adaptable.
- Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
- Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
- cutting angle is 95 degree, cutting direction is right hand.
- Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
- Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
- Tight impact bolts, simple structure, often applied for small hole processing.
- Note: due to the slight color change of manu....
Check StockTurning Insert Holder SVVCN 1212H 11, with 1PCS Insert VBMT 221 (VBMT110304), Square Shank, Steel, External, Screw Clamp, Neutral, 12mm Width x 12mm Height Shank, 100mm Length.
- ★Packing : 1pcs MTJNR5/8" , 1pcs MWLNR5/8" ,1pcs MCLNR5/8" ,1pcs SER5/8" turning holder , 4pcs carbide turning inserts and 3pcs wrenches..
- ★ASZLBYM lathe tool holder set : Shank size: 5/8" inch x 5/8" inch.
- Overall Length: 4"inch, cutting direction:right cutting..
- ★Turning holders : turning holder are made of high quality alloy steel with Nickel Cotated,which can effectively improve the wear resistance, corrosion resistance and stability of the turning holder , for long time use..
- ★Turning inserts : inserts are made of carbide and the coating material is TiN ,it can be used for finishing or semi finishing steel ,the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability ..
- ★The holders are packed in a premuim aluminium carrying case,easy to carry..
Check StockSavannah 3 Piece Carbide Mini Turning Tool Set with Flush Fit Comfort Grip Hardwood Handles | Heavy Duty Steel Riveted Ferrules and 2 ea Round 2 ea Square and 2 ea Diamond Shaped Carbide Cutters
- Easy wood turning on your lathe with Savannah Carbide Turning tools. We all know how "enjoyable" sharpening our turning tools can be. We also know....
- When the carbide cutter on the tool finally dulls, simply loosen the cutter screw, rotate the tip and secure the screw for a fresh, clean cutting....
- Unlike standard wood turning tools, when using carbide tipped cutters, you keep the cutter straight in on the object you are turning. This produces a....
- Each mini turning tool has a Flush Fit Comfort Grip handle. Each handle is approx. 9-1/8" long and has a heavy duty steel ferrule for added strength....
- The set includes 1 ea. round tool, 1 ea. square tool, 1 ea. diamond shaped tool, 2 ea. round carbide cutters, 2 ea. square carbide cutters, 2 ea.....
Check StockAloris Tool AXA-1S Oversized Turning and Facing Holder
- OSCARBIDE 3/4" Heavy-Duty Lathe Turning tool set include 1pcs each of SCLCR,SCLCL,SDJCR,SDNCN,SWGCR external turning tools holder, 1 pcs MGEHR grooving tool holder, 1 pcs SER threading tool holder.
- Turning lathes Holders are made of high quality steel with Nickel Cotated, inserts are made of carbide with Tin-coated, moistureproof, dust-proof,for long time use.
- Used for semi-finishing/roughing steel,metal,Fit for Turning,grooving or threading.
- Replacement cutter of this kit , please search the Asin of this item: B07R9ZXG5J on Amazon to buy it..
- 7pcs lathe cutting holders with 2pcs of keys packed in a premuim aluminium carrying case,easy to carry.
Check Stock14 Pieces Lathe Boring Bar Set 4 Pieces 95 Degree S07K/ S08K/ S10K/ S12M-SCLCR06 Lathe Boring Internal Turning Bar Holder with 10 Pieces CCMT0602 Carbide Inserts and 4 Pieces Wrench
- Package includes: you will receive 4 pieces SCLCR06 lathe boring bar turning tools holders, including a S07K-SCLCR06, a S08K-SCLCR06, a S10K-SCLCR06 and a S12M-SCLCR06, 10 pieces CCMT0602, metal indexable turning insert blades, sufficient quantity and easy to replace.
- Quality material: lathe boring bar turning tools holder are made of quality cemented carbide and tungsten steel.
- The cemented carbide material makes the turning tool durable and adaptable.
- Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
- Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
- cutting angle is 95 degree, cutting direction is right hand.
- Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
- Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
- Tight impact bolts, simple structure, often applied for small hole processing.
- Note: due to the slight color change of manu....
Check StockDEEFIINE Carbide Tipped Wood Lathe Turning Tools Set, Lathe Rougher Finisher Swan Neck Hollowing Tools and Interchangeable 19.5"Soft Grip Handle with Diamond Round Square Carbide Inserts
- Sharp and easy: Our carbide turning tools set can be used to quickly process any workpiece on your lathe. The wood lathe tool set can provide a smooth and clean cutting effect by four types of cutters designed for different grinding effects. This saves a lot of time when grinding and honing, because you can easily replace the blade when it becomes dull..
- wood turning Tool kit: The high-quality CNC machining made of square stainless steel makes it stronger, harder and rolls less than round shaft tools. It has a square shaft so that the knife can be used with a flat back. Keep the shelf flat and flush with the floor。.
- Ergonomic design: the turning tool kit is equipped with soft handle, fits comfortably in the hand,It has the characteristics of anti-skid, breathable, shock absorption, etc.
- Easy to use: our woodturning tool makes the turning of wood considerably easier. This set of carbide rotary tools is very suitable for all levels of experience and makes wood turning faster and more interesting. Each lathe tool has two carbide tips with multiple sharp edges that can be rotated multiple times. Simply turn the knife head a....
Check Stock