Categories

Best Easy to use Inputs

Rockville RockMix 5 Channel Pro Mixer Bundle with Rockville ROCKSHIELD 3 Mic Isolation Shield & Rockville RCM PRO Microphone & Rockville PRO-M50 Studio Headphones & Rockville RVES05 Stand (5 Items)

  • ...nes and turn each zone on or off. When both zones are playing it WILL play in stereo, Built in Bluetooth with 35 Foot range, USB input will play music files from a thumb drive or hard drive.
  • SD card playback will play music files stored on a memory card,Precision tuning with metal knobs,Mic mixer: 3 front microphone inputs with volume, tone, and echo control,Additional 2 rear mic inputs,Adjustable bass and treble music control,Adjustable bass, mid, and treble mic controls,Delay and repeat effect controls,Sets of RCA line/REC outputs,Set of RCA mic outputs,Removable 19” Rack mount brackets make this perfect for tabletop use or for rack mount applications.
  • Full function remote gives you easy access to all the important features, Built in pre-amplifier, Built in FM radio with manual tuning, and auto-scan, Built in quiet cooling fan, Bright blue LED display, Perfect for karaoke, DJ, KJ, home, and commercial applications, Rugged metal housing, 110V use only, Unit weight: 17.6 lbs (8 kg), Shipping weight: 22 lbs (10 kg), Unit dimensions: 16.9 inch x 13 inch x 5.1 inch.
  • Specifications: RMS @ 4 Ohm less than 1 % THD: 600 Watts RMS (300 x 2), RMS @ 8 Ohm less than 1 % THD: 400 Watts RMS (200 x 2), Peak @ 4 Ohm at 10 % THD: 2,000 Watts Peak (1000 x 2), Peak @ 8....
Check Stock

Planet Audio P10AW Amplified Car Subwoofer - 1000 Watts Low Profile 10 Inch Subwoofer Remote Subwoofer Control Great for Vehicles That Need Bass But Have Limited Space

  • Built-in Amplifier - A built-in 1000 Max watt amplifier powers the subwoofer.
  • Mosfet Power Supply - With a MOSFET power supply you get improved switching speeds, better performance with less power from the driver, lower....
  • Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use....
  • High Level Inputs - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the P10AW to your factory radio or....
  • Low Level Inputs - Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the P10AW with the source....
Check Stock

Rockville RBG18S 18' 2000W Active Powered PA Subwoofer W/Dsp+Limiter Pro/DJ

  • ...rain feedback capacitance, lower thermal impedance for higher switching frequencies.
  • Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes above the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s).
  • High Level Inputs - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the LOPRO10 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs.
  • Low-Level Inputs - Line level inputs (RCA inputs / low-level inputs) use RCA interconnect cables to link the LOPRO10 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers.
  • Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
  • Specs – 15.5” x 11” x 3”. If you are short on space, this is a great solution for you. The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. Weight: 13 lbs..
  • Warranty - Sound Storm provides a powerful 3-year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.com. We strongly encourage professi....
Check Stock

Sound Storm Laboratories LOPRO10 10 Inch Powered Under Seat Car Audio Subwoofer - 1200 Watts Max Built-in Amplifier Low Profile Remote Subwoofer Control for Truck Boxes and Enclosures

  • Built-in Amplifier - With a MOSFET power supply you get improved switching speeds, better performance with less power from the driver, lower gate-to-drain feedback capacitance, lower thermal impedance for higher switching frequencies.
  • Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes above the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s).
  • High Level Inputs - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the LOPRO10 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs.
  • Low-Level Inputs - Line level inputs (RCA inputs / low-level inputs) use RCA interconnect cables to link the LOPRO10 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers.
  • Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
Check Stock

Sound Storm EV5000D Car Amplifier – 5000 Watts Max Power 1 Ohm Stable Class D Monoblock MOSFET Power Supply Remote Subwoofer Control

  • POWER: Maximum Power Output of 5000 Watts at 1 Ohms into one channel. Maximum Power output of 2500 Watts at 2 Ohms into one Channel. This amplifier is....
  • HIGH LEVEL INPUTS: Speaker level inputs are commonly referred to as high-level inputs. This input will be used to connect the EV5000D to your factory....
  • LOW LEVEL INPUTS: Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the EV5000D with the source....
  • LOW-PASS CROSSOVER: A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. A low-pass filter will....
  • VARIABLE BASS BOOST: Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
Check Stock

BOSS Audio Systems BAB10 Amplified Car Subwoofer - 1200 Watts Max Power Low Profile 10 Inch Subwoofer Remote Subwoofer Control Great for Vehicles That Need Bass But Have Limited Space

  • BUILT-IN AMPLIFIER: A built-in 1200 Max watt amplifier powers the subwoofer.
  • PULSE WIDTH MODULATED: This design controls the output voltage and current precisely by not only removing the output current sensing loss, but also....
  • VARIABLE LOW-PASS FILTER: A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the....
  • HIGH LEVEL INPUTS: Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the BAB10 to your factory radio or....
  • LOW LEVEL INPUTS: Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the BAB10 with the source unit.....
Check Stock

Sound Storm Laboratories LOPRO8 Amplified Car Subwoofer - 600 Watts Max Power Low Profile 8 Inch Subwoofer Remote Subwoofer Control Great For Vehicles That Need Bass But Have Limited Space Black

  • BUILT-IN AMPLIFIER: With a MOSFET power supply you get improved switching speeds, better performance with less power from the driver, lower....
  • VARIABLE LOW-PASS FILTER: A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the....
  • HIGH LEVEL INPUTS: Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the LOPRO8 to your factory radio or....
  • LOW LEVEL INPUTS: Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the LOPRO8 with the source....
  • VARIABLE BASS BOOST: Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
Check Stock

Planet Audio AC1500.1M Monoblock Car Amplifier - 1500 Watts Max Power 2/4 Ohm Stable Class A/B Mosfet Power Supply Remote Subwoofer Control

  • power: max power output of 1500 watts at 2 ohms into one channel. maximum power output of 750 watts at 4 ohms into one channel. this amplifier is....
  • high level inputs: speaker level inputs are commonly referred to as high-level inputs. this input will be used to connect the ac1500.1m to your....
  • low level inputs: line level inputs, also known as rca inputs or low-level inputs, use rca interconnect cables to link the ac1500.1m with the source....
  • low-pass crossover: a low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. a low-pass filter will....
  • variable bass boost: variable bass boost allows you to adjust the low bass within the boost range to just the way you like it.
Check Stock

Sound Storm Laboratories US10K Amplified Car Subwoofer - 1000 Watts Max Power Low Profile 10 Inch Subwoofer 8 Gauge Installation Included Great for Vehicles That Need Bass But Have Limited Space

  • Built-in Amplifier - Pulse Width Modulated design simplifies power supplies. It controls the output voltage and current precisely by removing the....
  • KIT – 17’/8G red power cable, 40 amp fuse holder, 3’/8G ground cable, 16’/18G blue remote cable, 16’ RCA interconnect, 4" wire ties, plastic....
  • Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use....
  • High Level Inputs - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the US10K to your factory radio or....
  • Low-Level Inputs - Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the US10K with the source....
Check Stock

Planet Audio AC2500.1M Monoblock Car Amplifier - 2500 Watts Max Power, 2/4 Ohm Stable, Class A/B, Mosfet Power Supply, Remote Subwoofer Control

  • POWER: Maximum Power Output of 2500 Watts at 2 Ohms into one channel. Maximum Power output of 1250 Watts at 4 Ohms into one Channel. This amplifier is designed to run your subwoofer(s) giving them the power that they need to perform as they were meant to.
  • HIGH LEVEL INPUTS: Speaker level inputs are commonly referred to as high-level inputs. This input will be used to connect the AC2500.1M to your factory radio or aftermarket radio that does not have low-level (RCA) inputs..
  • LOW LEVEL INPUTS: Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the AC2500.1M with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers.
  • LOW-PASS CROSSOVER: A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. A low-pass filter will primarily keep high notes out of your subwoofer(s).
  • VARIABLE BASS BOOST: Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
Check Stock

BOSS Audio Systems Elite SLIM10 Amplified Car Subwoofer - Low Profile, 10 Inch Subwoofer, Remote Subwoofer Control, for Vehicles Needing Bass with Limited Space

  • ...lso eliminating all secondary feedback circuitry. Efficiency. Increased reliability.
  • Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s).
  • High Level Inputs - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the SLIM10 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs.
  • Low Level Inputs - Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the SLIM10 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers.
  • Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
  • Specs - Dimensions: 13.58” x 10.43” x 3.15”, Weight: 10.45 lbs. Phase control. LED status indicator. Thermal, Short and Overload Protection Circuits. High Performance Voice Coil. Rubber Surround. Aluminum Cone.
  • Warranty - BOSS Audio Systems provides a Powerful 3 Year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.com. We strongly en....
Check Stock

BOSS Audio Systems BASS10 Amplified Car Subwoofer - Low Profile, 10 Inch Subwoofer, Remote Subwoofer Control, for Vehicles Needing Bass with Limited Space, Remote Subwoofer Control

  • ...lso eliminating all secondary feedback circuitry. Efficiency. Increased reliability.
  • Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s).
  • High Level Inputs - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the BASS10 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs.
  • Low Level Inputs - Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the BASS10 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers.
  • Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
  • Specs - Dimensions: 14” x 12.3” x 3.3”, Weight: 11.35 lbs. Phase control. LED status indicator. Thermal, Short and Overload Protection Circuits. High Performance Voice Coil. Rubber Surround. Aluminum Cone.
  • Warranty - BOSS Audio Systems provides a Powerful 3 Year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.com. We strongly encoura....
Check Stock

BOSS Audio Systems BASS8 8 Inch Under Seat Powered Car Subwoofer – 800 High Output, Low Profile, Built in Amplifier, for Truck, Boxes and Enclosures, Remote Subwoofer Control

  • ...lso eliminating all secondary feedback circuitry. Efficiency. Increased reliability.
  • Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s).
  • High Level Inputs - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the BASS8 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs.
  • Low Level Inputs - Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the BASS8 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers.
  • Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
  • Phase Control - Phase control lets you adjust the speaker phase with the amplifier if your speakers or subwoofer are hooked up “out of phase”.
  • Specs - Dimensions: 12.20” x 8.86” x 2.95”, Weight: 8.82 lbs. LED status indicator. Thermal, Short and Overload Protection Circuits. High Performance Voice Coil. Rubber Surround. Aluminum Cone, Remote Subwoofer Control.
Check Stock