Categories

Best Easy to use Thermocouple

PIE 525B Automated T/C & RTD Calibrator 12 RTD & 14 T/C types

  • Automated RTD and Thermocouple Calibrator. Comes with rubber boot, hands free carrying case, test leads and NIST cert..
  • Easy to use With the PIE 525B you can check and calibrate all your thermocouple and RTD instruments and measure temperature sensors..
  • Take it into the shop, plant or field Carry it without worry - it comes protected with a rubber boot and rugged, low profile switches. Easy to operate even in the dark areas of the plant with the backlit display..
  • Calibrate thermocouple instruments to 0.1 & 0.01 degrees-F & degrees-C The PIE 525B works with the thermocouples you use including types J, K, T, E, R, S, B, N, G, C, D, L (J-DIN), U (T-DIN) and P (Platinel II). Or calibrate from -13.0000 to +80.0000 mV..
  • Calibrate RTD instruments to 0.1 & 0.01 degrees-F & degrees-C Stop carrying around a decade box and RTD resistance tables. The 525B works with the RTDs you use including Platinum 10, 50, 100, 200, 500 & 1000 Ohm (alpha = 3850), Platinum 100 Ohm (alpha = 3902, 3916, 3926), Copper 10 & 50 Ohm, and Nickel 120 Ohm. Or calibrate from 0.000 to 400.000 and 0.00 to 4000.00 Ohms..
Check Stock

Hampton Bay 42,000 BTU Pyramid Patio Heater

  • This thermocouple and tilt switch is to solve the problem of pilot light NOT stay lit.
  • Work with outdoor propane patio heater, standing patio heater, tower glass tube heaters, table propane heater, Hampton bay patio heater etc..
  • Easy to install, just connect the 2 lead together to bypass it.
  • The thermocouple wire has a full extension length of 350mm with temperature resistance sleeves. It has an M8*1 fixed thread head with end thread nuts that are compatible with 8mm gas valves..
  • Package including 1pc tilt switch + 1pc thermocouple..
Check Stock

Thermco ACC310DLSDIG Laboratory Long Stem Digital Thermometer, 12\ Stem Length, -50 to 300°C Range, +/-1.0°C Accuracy

  • High Temperature K-type Thermocouple Thermometer Set with Stainless Steel Probe.
  • K-type thermocouple wire with Standard Accuracy: +/- 2.2 °C or +/- .75%.
  • 5 ft (155 cm) long thermocouple cable with braided stainless steel cover, mini thermocouple plug made from chromel / alumel.
  • Temperature measurement range: -328 to 932 °F (-200 to 500 °C), short term 1472 °F (800 °C).
  • Grounded K-type Thermocouple junction for fast measurements, 1x 9V battery included.
Check Stock

3\ Outside Air Kit for Pellet Stoves with 3\ Air Intake Pipe Including Harman Stoves 3\ X 10'

  • QuadraFire Thermocouple 800, 1000, 1100i, 1200, 1200i Pellet Stoves 812-0210.
  • Top Quality Aftermarket Replacement Part.
  • The Thermocouple is the device that monitors the fire after start-up. Once it reaches temp the thermocouple allows the stove to start feeding on it's own in normal operation mode. If your stove goes out after the initial start-up cycle, more than likely the thermocouple needs to be replaced..
  • Designed Specifically for the above mentioned models.
Check Stock

K Thermocouple Terminal block Ceramic Insulator Kiln Temperature Sensor

  • ➤ 【SIZE】— Thermal coupler total length 900mm, with five nuts gas parts thermocouple gas valve for gas..
  • ➤ 【SAFETY】— Works with solenoid valve to prevent accidents happening, once gas leakage and gas burn out appears, it can put out..
  • ➤ 【APPICATION】— The fireplace thermocouple suitable for induction cooker, gas stove, heating device and other burning appliances..
  • ➤ 【FUNCTION】— Very simple and convenient to use. The gas fireplace thermocouple is designed for temperature sensing and measurement..
  • ➤ 【SERVICE】—If you have any questions about quality and instructions during use, we will be happy to assist you..
Check Stock

Instrukart Dry Block High Temperature Calibrator AI-DBC 650 for Calibration Labs Pharmaceutical divisions Thermal Plants divisions Along with Calibration Certificate

  • Accuracy: ±0.6°C, Bath Stability: ±0.5°C.
  • Measuring Functions: J Type Thermocouple, K Type Thermocouple, T Type Thermocouple, R Type Thermocouple, S Type Thermocouple, N Type Thermocouple, MA, MV, Volts, Ohms, RTD (Pt 100).
  • Temperature Steps: 50°C, 150°C, 300°C, 450°C, 600°C.
  • Switch Test: Continuity check with OPEN / CLOSE indication.
  • Transmitter Supply: 24V DC ± 10% (Loop Powered).
  • Power Supply: 230V AC ± 5% / 50Hz, 500 W for 350UTC.
  • Supply Scope: Instrument, Power Cable, Carrying Case, Test Lead(2 & 3 Wire), Insertion Tube, Insertion Tool,Spare Fuses: 6A x 2nos User Manual, Calibration Certificate.
Check Stock

Fluke 51 II Single Input Digital Thermometer

  • Thermocouple thermometer for use in applications requiring a broad range of temperatures, including furnaces, kilns, freezers, and other industrial applications.
  • Measures temperatures in celsius, fahrenheit, or kelvin via a type k, type j, type t, or type e thermocouple probe.
  • Includes a type k bead thermocouple probe with a 40" cable that measures from minus 40 to +260 degrees c ( minus 40 to +500 degrees f).
  • Provides the relative time of minimum, maximum, and average temperature measurements for monitoring.
  • Conforms to nist standards for compliance with regulations.
Check Stock

Aupoko Patio Heater Thermocouple, Outdoor Heater Replacement Parts M8 x 1 End Connection Nuts Thermocouple 410 mm Length M6 x 0.75 Head Thread with 6.3 MM/0.25'' Flat Terminal

  • COMPATIBILITY: The thermocouple for gas patio heater is suitable for BBQ grill, fire pit, fireplace, heater hose connection..
  • EASY INSTALLATION: You only need less than 5S to open valve..
  • PREMIUM QUALITY: High standard solid copper and brass material, firm construction for durability and longevity..
  • DIMENSION: Universal thermocouple with M6x0.75 thread on head, M8 x 1 end connection nuts thermocouple..
  • WARRANTY: The patio heater thermocouple complies with 1- Year limited warranty, if there any question, please feel free to contact us..
Check Stock

MENSI Outdoor Propane Gas Patio Heater Replacement Parts Safety Thermocouple Sensor

  • Propane gas patio heater dump switch type thermocouple end nuts for valve M8*1.
  • Two terminals connect dump switch on the patio heaters.
  • Thermocouple tip thread M6x0.75 universal type (Can adjust height easily by nuts).
  • Easy install - Head for heating around burner and thread nuts for valve other two terminals for dump switch.
  • The thermocouple can connect a thermostat as well. Keep the head to be heated always or it may stopped gas.
Check Stock

2 Pcs Digital 2 Channels K Type Thermometer with 8 Thermocouples (Wire and Stainless Steel) -50~1300°c (-58~2372°f) Dual Measurement Meter Sensor Handheld HVAC Thermometer High Temperature Pyrometer

  • High Accuracy: reading accuracy (±0.1°C ±0.4), fast response using K type thermocouple probe, this digital temperature gauge will bring you a lot of convenience.
  • You will get 2 pcs of K type thermometers, 4 pcs of wire thermocouples and stainless steel thermocouples.
  • Multiple Temperature Display: in addition to the max/ min/ average, data hold, and auto power off functions, this hand held temperature reader is specially designed with a "T1-T2" calculation function, making it easy for the user to find the difference between two samples.
  • ​Portable and Practical: powered by battery, this thermometer with probe is portable and practical, operate it with 6 simple buttons with clear instructions, suitable for beginners and skilled users.
  • Plus, the removable silicone rubber cover protects your device from accidental drops.
  • It is factory calibrated and factory reset, and any standard K type thermocouple connector can be applied to replace the included thermocouple when needed.
  • Wide Measurement Temperature Range: mainframe range of digital k type thermometer is about -50°C ~ 1300°C (-58°F ~ 2372°F).
Check Stock

PATIOSIR Patio Gas Heater Dump Switch, Outdoor Heater Replacement Parts Thermocoupler &Tilt Switch, Garden Heater Igniter Repair Parts

  • ☆The head of thermocouple is fixed thread, need to be compared that it is suitable for your heater before purchasing the product..
  • ☆Made of high-standard brass and red copper,and ABS materials, during operation, you need to hold the valve for 5-10 seconds and then thermocouple will start work..
  • ☆Suitable for Propane gas heaters with Thermoelectric Safety, such as room gas heater, outdoor patio heater and other Thermoelectric gas products..
  • ☆The thermocouple is easy to install. The probe is connected to the ignition device, the thermocouple is connected to the valve, and the other two ports are connected to the safety dumping switch, which does not require special tools and is prefect compatible for the original part..
  • ☆The safety tipping switch will automatically stop the heater when the heater is tilted or dropped, which can prevent the occurrence of gas leakage when the fire is extinguished and the gas is still on, which is more secure. Suitable for weak dump switches with gas R ≤ 10mΩ..
Check Stock

Fluke - FLUKE-52-2 60HZ 52-2 60HZ Dual Input Digital Thermometer

  • Thermocouple thermometer for use in applications requiring a broad range of temperatures, including furnaces, kilns, freezers, and other industrial applications.
  • Measures temperatures in Celsius, Fahrenheit, or Kelvin via a Type K, Type J, Type T, or Type E thermocouple probe.
  • Includes a Type K bead thermocouple probe with a 40" cable that measures from -40 to +260 degrees C (-40 to +500 degrees F).
  • Provides the relative time of minimum, maximum, and average temperature measurements for monitoring.
  • Conforms to NIST standards for compliance with regulations.
Check Stock

K Type Thermocouple Temperature Thermocouple Sensor Temperature Detector Temperature Gauge with M4 Thread for 3D Printer Temperature Sensor

  • Type K (chromel–alumel) is the most common general-purpose thermocouple with a sensitivity of approximately 41 µV/°C.[10] It is inexpensive, and a wide variety of probes are available in its −200 °C to +1350 °C (−330 °F to +2460 °F) range. Type K was specified at a time when metallurgy was less advanced than it is today, and consequently characteristics may vary considerably between samples. One of the constituent metals, nickel, is magnetic.
  • a characteristic of thermocouples made with magnetic.
  • They operate very well in oxidizing atmospheres. If, however, a mostly reducing atmosphere (such as hydrogen with a small amount of oxygen) comes into contact with the wires, the chromium in the chromel alloy oxidizes. This reduces the emf output, and the thermocouple reads low. This phenomenon is known as green rot, due to the color of the affected alloy. Although not always distinctively green, the chromel wire will develop a mottled silvery skin and become magnetic. An easy way to check for t.
  • Hydrogen in the atmosphere is the usual cause of green rot. At high temperatures, it can diffuse through solid metals or an intact metal thermowell. Even a sheath of magnesium oxide insulating the thermocouple will not keep the hydrogen out..
Check Stock