Categories

Best Edge Banding With Fleece

GSCIT Club Black Edge Banding, 1/2 inch x 25ft Melamine Edge Banding with Hot Melt Adhesive Pre-glued Edge Banding Flexible Edging for Plywood Cabinet Furniture

  • √【BRAND GUARANTEE】- GSCIT Club is a company specialized in Edge banding, which can GUARANTEE THE ORIGINAL QUALITY AND CUSTOMER SERVICE..
  • √【HIGH QUALITY】- The edge banding is made of high quality melamine material, which is durable and elastic, with a smooth surface and not easy to be dirty.When you repair Laminate and Cabinets, Melamine Edge banding will be your first choice..
  • √【UPGRADE DESIGN】- The size of Edge Banding is 1/2 inch x 25ft, and the thickness is 0.3mm, It's suitable for your daily needs. Edge Banding is a strip of wood veneer with heat melt adhesive pre-applied to the back. You simply hold the edge banding in place, then run over it with a heated iron. After cooling, please press it with your hand and trim off the excess sides with the Utility Knife, 0.3mm thickness can let you easy to do..
  • √【WIDELY USED】- Our design is high quality & fashionable, This Edge Banding were doing market research which is matching most customer favorites. Melamine Edge banding is a thin material used to seal the exposed sides, such as plywood, particle board or MDF, increasing durability and a new look. It can update your desk, cabinet, DIY and the other furniture, the edging will give a smooth and clean surface to it..
Check Stock

Edge Banding Trimmer for All Directions, Edge Trimmer with Tungsten Carbide Blades (1-Pack)

  • Easy To Use - Works perfectly with no practice or experience, Pneumatic action allows the edge banding cutter to adjust to different thicknesses very easily. Makes edge banding a breeze, is very comfortable to use, will not cause palm fatigue..
  • Save Time - Using our edge banding tools can greatly reduce the time and effort to complete the work, no more utility knives or razor blades. This plywood edge trimmer tool makes it so easy!.
  • Sharp, Leave No Trace - The sharp tungsten carbide blades to make the trimmer cut smoothly and cleanly and leave a nice edge. Will not cause the problem of excessive cutting. Clean, tight incisions, no confusion or fuss..
  • Easy Conversion - Easy to disassemble and assemble! When you cannot slide the tool with the two jaws due to the special gap problem, you can take the veneer edge trimmer apart and use it on one edge at a time..
  • Cuts in Both Directions - The edge banding machine has four sharp cutting edges, which can trim forwards and backward. This is very suitable for trimming oak edge banding and is suitable for any project that involves installing ....
Check Stock

GSCIT Club Melamine Edge Banding, 2 inch x 50ft White Edge Banding with Hot Melt Adhesive Pre-glued Cabinet Edge Banding Flexible White Veneer Edging for Plywood Furniture Table

  • √【BRAND GUARANTEE】- GSCIT Club is a company specialized in Edge banding, which can GUARANTEE THE ORIGINAL QUALITY AND CUSTOMER SERVICE..
  • √【HIGH QUALITY】- The edge banding is made of high quality melamine material, which is durable and elastic, with a smooth surface and not easy to be dirty.When you repair Laminate and Cabinets, Melamine Edge banding will be your first choice..
  • √【UPGRADE DESIGN】- The size of Edge Banding is 2 inch x 50ft, and the thickness is 0.3mm, It's suitable for your daily needs. Edge Banding is a strip of wood veneer with heat melt adhesive pre-applied to the back. You simply hold the edge banding in place, then run over it with a heated iron. After cooling, please press it with your hand and trim off the excess sides with the Utility Knife, 0.3mm thickness can let you easy to do..
  • √【WIDELY USED】- Our design is high quality & fashionable, This Edge Banding were doing market research which is matching most customer favorites. Melamine Edge banding is a thin material used to seal the exposed sides, such as plywood, particle board or MDF, increasing durability and a new look. It can update your desk, cabinet, DIY and the other furniture, the edging will give a smooth and clean surface to it..
Check Stock

GSCIT Club Melamine Edge Banding, 3/4 inch x 25ft White Edge Banding with Hot Melt Adhesive Pre-glued Cabinet Edge Banding Flexible White Veneer Edging for Plywood Furniture Table

  • √【BRAND GUARANTEE】- GSCIT Club is a company specialized in Edge banding, which can GUARANTEE THE ORIGINAL QUALITY AND CUSTOMER SERVICE..
  • √【HIGH QUALITY】- The edge banding is made of high quality melamine material, which is durable and elastic, with a smooth surface and not easy to be dirty.When you repair Laminate and Cabinets, Melamine Edge banding will be your first choice..
  • √【UPGRADE DESIGN】- The size of Edge Banding is 3/4 inch x 25ft, and the thickness is 0.3mm, It's suitable for your daily needs. Edge Banding is a strip of wood veneer with heat melt adhesive pre-applied to the back. You simply hold the edge banding in place, then run over it with a heated iron. After cooling, please press it with your hand and trim off the excess sides with the Utility Knife, 0.3mm thickness can let you easy to do..
  • √【WIDELY USED】- Our design is high quality & fashionable, This Edge Banding were doing market research which is matching most customer favorites. Melamine Edge banding is a thin material used to seal the exposed sides, such as plywood, particle board or MDF, increasing durability and a new look. It can update your desk, cabinet, DIY and the other furniture, the edging will give a smooth and clean surface to it..
Check Stock

Edge Supply Maple Wood Veneer Sheet Flat Cut, 24\ x 96\

  • EXTRA CLEAN "A" GRADE NATURAL WOOD VENEER EDGING – highest grade veneer quality pre-glued, birch wood veneer edging for repair or enhancing cabinetry, furniture, DIY projects, shelving, crafts and more. Finely sanded to perfection, this plywood edge banding provides a perfect finish to your projects.
  • GERMAN PRE-GLUED HOT MELT ADHESIVE – pre-glued with top-quality, German hot melt adhesive, our veneer edge banding is super easy to apply with a household iron. The extra strong hot melt glue is evenly distributed on the veneer edging for a strong, permanent bond.
  • SUPER EASY INSTALLATION – to apply this veneer edge banding, simply iron on to the surface with a regular household iron, hot air blower such as a hairdryer on high heat, or an edge banding machine if you have one in your toolkit.
  • PREMIUM QUALITY REAL WOOD VENEER EDGING – this birch 3/4” X 50' iron-on veneer roll is all prepared ready for your application. Finely sanded to perfection, this plywood edge banding can be trimmed if required or lightly sanded down to fit..
  • USE ON A VARIETY OF SURFACES – this roll of iron on edge banding can be stained or painted with a lacquer finish to match your project. Suitable for a wide variety of surfaces, this veneer edging is great when applied to w....
Check Stock

Edge Supply Professional Heavy Duty Edge Banding Trimmer – Edge Trimmer for Wood Veneer Edge Banding, PVC, Melamine, Plastic – Veneer Trimmer for Perfect Straight Finish – Woodworking Veneer Cutter

  • EDGE BANDING POFESSIONAL HEAVY DUTY TRIMMER – this expert designed edge banding trimmer easily cuts veneer edge banding with ease thanks to the ultra-sharp steel blade. Cut off any excess material and achieve a perfect, straight finish every time, without tearing the banding.
  • STRAIGHT FLUSH EDGES – our veneer cutter is easy to use and is suitable for use by both professionals and hobby woodworkers. A versatile veneer trimmer which cuts neatly straight lines resulting in a clean, flush finish.
  • SUITABLE FOR A VARIETY OF EDGE BANDING SIZES – this edge banding cutter has been designed to fit edging up to 1 mm thick and between 0.5 and 2 inches wide bandings.
  • PREMIUM QUALITY VENEER CUTTER – made from the highest quality carbon steel, this long-lasting veneer trimmer features a steel blade which supplies a clean cut. The blade can be sharpenned so there is no need to replace blades like traditional trimmers..
  • VERSATILE EDGE BANDING CUTTER – this veneer edge trimmer is ideal for a variety of woodworking projects including furniture, shelving and cabinetry and can be used on a wide range of materials including wood veneer, melamine, plastic, PVC and more.
Check Stock

Mixed Variety Domestic Veneer Pack 5-6 sq ft/9 Sheets Or More

  • EXTRA CLEAN "A" GRADE NATURAL WOOD VENEER EDGING – highest grade veneer quality pre-glued, maple wood veneer edging for repair or enhancing cabinetry, furniture, DIY projects, shelving, crafts and more. Finely sanded to perfection, this plywood edge banding provides a perfect finish to your projects.
  • GERMAN PRE-GLUED HOT MELT ADHESIVE – pre-glued with top-quality, German hot melt adhesive, our veneer edge banding is super easy to apply with a household iron. The extra strong hot melt glue is evenly distributed on the veneer edging for a strong, permanent bond.
  • SUPER EASY INSTALLATION – to apply this veneer edge banding, simply iron on to the surface with a regular household iron, hot air blower such as a hairdryer on high heat, or an edge banding machine if you have one in your toolkit.
  • PREMIUM QUALITY REAL WOOD VENEER EDGING – this maple iron-on veneer roll is all prepared ready for your application. Finely sanded to perfection, this plywood edge banding can be trimmed if required or lightly sanded down to fit..
  • USE ON A VARIETY OF SURFACES – this roll of iron on edge banding can be stained or painted with a lacquer finish to match your project. Suitable for a wide variety of surfaces, this veneer edging is great when applied to wood, plywood,....
Check Stock

Edge Supply Birch 3/4” X 250' Roll of Plywood Edge Banding – Pre-glued Real Wood Veneer Edging – Flexible Veneer Edging – Easy Application Iron-on Edge Banding for Furniture Restoration – Made in USA

  • EXTRA CLEAN "A" GRADE NATURAL WOOD VENEER EDGING – highest grade veneer quality pre-glued, birch wood veneer edging for repair or enhancing cabinetry, furniture, DIY projects, shelving, crafts and more. Finely sanded to perfection, this plywood edge banding provides a perfect finish to your projects.
  • GERMAN PRE-GLUED HOT MELT ADHESIVE – pre-glued with top-quality, German hot melt adhesive, our veneer edge banding is super easy to apply with a household iron. The extra strong hot melt glue is evenly distributed on the veneer edging for a strong, permanent bond.
  • SUPER EASY INSTALLATION – to apply this veneer edge banding, simply iron on to the surface with a regular household iron at cotton temperature, hot air blower such as a hairdryer on high heat, or an edge banding machine if you have one in your toolkit.
  • SUPER EASY INSTALLATION – to apply this veneer edge banding, simply iron on to the surface with a regular household iron at cotton temperature, hot air blower such as a hairdryer on high heat, or an edge banding machine if you have one in your toolkit PREMIUM QUALITY REAL WOOD VENEER EDGING – this birch 3/4” x 250’ iron-on veneer roll is all prepared ready for your application. Finely sanded to perfection, this plywood edge banding can....
Check Stock

40-6\ x 12\ Labeled Wood Veneer Pieces (20 Square Feet) Exotic and Domestic Marquetry Arts Crafts Pack

  • EXTRA CLEAN "A" GRADE NATURAL WOOD VENEER EDGING – highest grade veneer quality pre-glued, red oak wood veneer edging for repair or enhancing cabinetry, furniture, DIY projects, shelving, crafts and more. Finely sanded to perfection, this plywood edge banding provides a perfect finish to your projects.
  • GERMAN PRE-GLUED HOT MELT ADHESIVE – pre-glued with top-quality, German hot melt adhesive, our veneer edge banding is super easy to apply with a household iron. The extra strong hot melt glue is evenly distributed on the veneer edging for a strong, permanent bond.
  • SUPER EASY INSTALLATION – to apply this veneer edge banding, simply iron on to the surface with a regular household iron at cotton temperature, hot air blower such as a hairdryer on high heat, or an edge banding machine if you have one in your toolkit.
  • PREMIUM QUALITY REAL WOOD VENEER EDGING – this red oak 2” x 50’ iron-on veneer roll is all prepared ready for your application. Finely sanded to perfection, this plywood edge banding can be trimmed if required or lightly sanded down to fit..
  • USE ON A VARIETY OF SURFACES – this roll of iron on edge banding can be stained or painted with a lacquer finish to match your project. Suitable for a wide variety of surfaces, this veneer edging ....
Check Stock

Edge Supply Edge Banding Trimmer – Veneer Edge Trimmer for Wood Veneer Edge Banding, PVC, Melamine, Plastic – Veneer Trimmer for Perfect Straight Finish – Woodworking Veneer Cutter

  • EDGE BANDING TRIMMER – this expert designed edge banding trimmer easily cuts veneer edge banding with ease thanks to the circular, ultra-sharp blade. Cut off any excess material and achieve a perfect, straight finish every time, without tearing the banding.
  • STRAIGHT FLUSH EDGES – our veneer cutter is easy to use and is suitable for use by both professionals and hobby woodworkers. A versatile veneer trimmer which cuts neatly around tight circular radiuses and straight lines resulting in a clean, flush finish.
  • SUITABLE FOR A VARIETY OF VENEER SIZES – this edge banding cutter has been designed to fit edging up to 1 mm thick and between 0.5 and 2 inches wide.
  • PREMIUM QUALITY VENEER CUTTER – made from the highest quality carbon steel, this long-lasting veneer trimmer features a circular blade which supplies a clean cut and can be slightly rotated to expose a fresh new edge if needed. There is no need to change blades for years..
  • VERSATILE EDGE BANDING CUTTER – this veneer edge trimmer is ideal for a variety of woodworking projects including furniture, shelving and cabinetry and can be used on a wide range of materials including wood veneer, melamine, plastic, PVC and more.
Check Stock

Edge Supply Walnut Preglued 1\ X 25' Roll Wood Veneer Edgebanding - Iron on with Hot Melt Adhesive. Sanded to Perfection. Easy Application. Made in USA.

  • EXTRA CLEAN "A" GRADE NATURAL WOOD VENEER EDGING – highest grade veneer quality pre-glued, maple wood veneer edging for repair or enhancing cabinetry, furniture, DIY projects, shelving, crafts and more. Finely sanded to perfection, this plywood edge banding provides a perfect finish to your projects.
  • GERMAN PRE-GLUED HOT MELT ADHESIVE – pre-glued with top-quality, German hot melt adhesive, our veneer edge banding is super easy to apply with a household iron. The extra strong hot melt glue is evenly distributed on the veneer edging for a strong, permanent bond.
  • SUPER EASY INSTALLATION – to apply this veneer edge banding, simply iron on to the surface with a regular household iron at cotton temperature, hot air blower such as a hairdryer on high heat, or an edge banding machine if you have one in your toolkit.
  • PREMIUM QUALITY REAL WOOD VENEER EDGING – this maple 1/2” x 50’ iron-on veneer roll is all prepared ready for your application. Finely sanded to perfection, this plywood edge banding can be trimmed if required or lightly sanded down to fit..
  • USE ON A VARIETY OF SURFACES – this roll of iron on edge banding can be stained or painted with a lacquer finish to match your project. Suitable for a wide variety of surfaces, this veneer edging is....
Check Stock

Chamfer Plane Edge Plane Edge Banding Trimmer Veneer Edge Trimmer Edge Chamfer Burr Scraper for Woodworking (R1)

  • This plane is used to chamfer or deburr edge banding to give sheets with smooth curved edges.
  • Aluminum alloy body,tungsten steel blade,CNC machined,well made and sturdy.
  • Replaceable tungsten steel blade and on one blade has two cutting edge,equivalent to you get two blade.
  • This edge banding trimmer with portable size and easy to carry.
  • 3 Types Optional: The R1 type is suitable for both thin and thick edge banding, thickness from 0.8mm to 2.0mm.
  • R2 type is suitable for the thicker edge banding, thickness from 1.5mm to 2.0mm.
  • R3 type is suitable for solid wood board chamfering.
Check Stock

Edge Supply Walnut 7/8' X 250' Roll Preglued. Walnut Edge Banding, Iron on with Hot Melt Adhesive. Flexible Wood Veneer Walnut Edging Sanded to Perfection. Easy Application, Made in USA.

  • EXTRA CLEAN "A" GRADE NATURAL WOOD VENEER EDGING – highest grade veneer quality pre-glued, walnut wood veneer edging for repair or enhancing cabinetry, furniture, DIY projects, shelving, crafts and more. Finely sanded to perfection, this plywood edge banding provides a perfect finish to your projects.
  • GERMAN PRE-GLUED HOT MELT ADHESIVE – pre-glued with top-quality, German hot melt adhesive, our veneer edge banding is super easy to apply with a household iron. The extra strong hot melt glue is evenly distributed on the veneer edging for a strong, permanent bond.
  • SUPER EASY INSTALLATION – to apply this veneer edge banding, simply iron on to the surface with a regular household iron at cotton temperature, hot air blower such as a hairdryer on high heat, or an edge banding machine if you have one in your toolkit.
  • PREMIUM QUALITY REAL WOOD VENEER EDGING – this walnut 7/8” x 250’ iron-on veneer roll is all prepared ready for your application. Finely sanded to perfection, this plywood edge banding can be trimmed if required or lightly sanded down to fit..
  • USE ON A VARIETY OF SURFACES – this roll of iron on edge banding can be stained or painted with a lacquer finish to match your project. Suitable for a wide variety of surfaces, this veneer edging....
Check Stock