Best Efi For Ls Swap

Fuel Filter/Regulator 4 BAR with -6AN Inlet and Outlets Stainless Steel for LS swaps and EFI conversion

• Fuel filter & pressure regulator for LS swap with no adapter fittings required..
• 58 PSI (4 BAR) regulated pressure output, perfect for LS swaps and many EFI conversions..
• Aftermarket 5 micron fuel filter and pressure regulator manufactured with AN -6 inlet and outlets..
• Connect directly to your -6AN hose or hard line..
• For custom/aftermarket application only. AN-6 ends will not fit hoses in original GM application..

Fuel Filter/Regulator 58 PSI Kit with AN-6 Fittings for LS swaps and EFI conversion

• Simple fuel supply for LS swap with AN-6 adapter fittings included..
• Your electric fuel pump works continuously & this bypass regulator passes excess fuel back into the tank so the pump can run freely. This filter-regulator is commonly installed near the tank so that only a short return line is required..
• This is a popular fuel supply solution for fuel injection (EFI / FI) retrofits and for swaps to modern engines like the GM Gen III and Gen IV "LS" V8s..

Autoutfit 6AN 3/8" LS Swap EFI Fuel Injection Hose Line Fitting Kit, Nylon Braided PTFE Fuel Hose 25Ft

• ...(-60℃ to 230℃). Maximum working pressure: 3000 psi. Bursting pressure: 10000psi. .
• 【Application】This PTFE Fuel line Kit can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. This kit can be used in EFI LS system, ls engine swap and EFI conversion fuel line, turbo oil feed and boost line, transmission oil cooler line, carb fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and turbocharger fuel line..
• 【Installation recommended】 PTFE hose relatively hard, it can't be bend and folding in half..

RULLINE Motor Mount Adapter Plate SBC Vehicle to LS Engine Universal Swap Bracket Small Block LS Conversion Adjustable LS1 LS3 LS2 LQ4 LQ9 LS6 L92 L99 L33 LR4 Billet

• 【LS Conversion】 These LS swap motor mounts will allow you to swap a 1997-2013 LSX style engine into any Chevy application that originally used 3....
• 【LS Swap】—— The Chevy LS engine swaps into MOST 60's and 70's Chevy pickups and cars such as Camaro, Nova, Chevelle, and Impala among others.
• 【4 Adjustable Positions】The ls motor mount kit Machined 6061 billet aluminum,Designed to allow four positions in order to accommodate the widest....
• 【Premium Quality】——Made of CNC Aluminum Alloy Material, they are precision-cut to provide a secure fit to the block and motor mount,These ls....
• 【Include】2 pcs ls motor mount adapter, 8 flat head bolts, and 6 flange M10-1.5 bolts..

A-Team Performance - Fabricated Intake Manifold w/Drive By Wire 102mm EFI Throttle Body - Compatible with LS LSX LS1 LS2 LS6 Black

• 102mm Black Intake Manifold with EFI Drive by Wire 0° Opening Throttle Body Complete with Gaskets, Hardware, Black Fuel Rails, & Fuel Crossover Line.
• Compatible with Chevrolet Small Block V8 GEN. III/IV (LS-Based) 4.8 L / 293 in3 (LR4) 5.3 L / 325 in3 (L33, L59, LM4, LM7) 5.7 L / 346 in3 (LS1, LS6) 6.0 L / 364 in3 (LQ4, LQ9, LS2).
• Compatible With Cathedral Port LS LSX LS1 LS2 LS6 heads.
• Hardware - 3mm (1/8") thick T6061 Sheet Aluminum construction.
• Durability - The intake will not bend or flex With Boost Or Vacuum.

Speedmaster PCE148.1008 Qualifier Intake Manifold

E-Tuner 4

• EFI Fabricated Intake Manifold with Fuel Rails and Throttle Body Short, Silver.
• Compatible With: Chevrolet Small Block V8 Gen. III/IV (LS-based) · 4.8 L / 293 In3 (L20, Ly2) · 5.3 L / 325 In3 (Lc9, Lh6, Lh8, Lmg, Ly5) · 6.0 L / 364 In3 (L76, L96, LFA, LY6) · 6.2 L / 376 LN3 (L92, L99, LS3, LSA)Rectangle Port Intakes only!.
• Fabricated Aluminum Sheet Metal Intake Manifold -102MM Throttle Body -Fuel Rails & Cross Over -4-Bolt LSX - Gaskets & Hardware are included..
• Throttle Body is Dive by Cable Overview We Designed Our Fabricated Aluminum Sheet Metal Intake Manifold to Improve the Look and Performance of Your LS Engine..

Vortech 4GX218-150L V-3 Si-Trim EFI Truck LS-Engine Swap Supercharger Kit

• For use with 1999-2013 GM Truck Front Engine Accessory Drive (Not....
• Tuner Kit (Fuel & Tuning Components Not....

ICT Billet LS Billet Coil Brackets Holley EFI Smart Coil Pack LS1 LS3 LS2 LSX Swap ICT 551575

• Made in Wichita, Kansas From Aerospace Grade, USA Produced, Billet Aluminum.
• Includes Two brackets and mounting hardware.
• Compatible With All 1999-2013 LS OEM Engines Valve Covers.

LTI Universal 10ft Nylon Stainless Steel Braided 5/8\ AN10 PTFE E85 Fuel Line Hose Injection (BLACK, 10AN)

• ...lly designed to work in any automotive project. this hose is ideal for high temperature, high pressure, and offers wide range of fluid compatibility..
• PTFE Nylon Braided fuel line can be used as fuel injection hose, turbo oil feed and boost line, transmission oil cooler line, EFI fuel line, carb fuel line, ls engine swap fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and other high temperature high pressure applications..
• Application: fuel, lube, alcohol, ethanol, coolant and air for automobiles or marine engines, most suitable for racing cars & motor racing bikes. Working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Pressure Rating: Maximum Working Pressure (psi): 2000 psi. Bursting Pressure (psi): 6000psi..
• This hose is made of high-quality PTFE on the inside that gives them high chemical and heat resistance, along with a braided Black Nylon outside which gives them high durability, extreme pressure resistance, and Professional installation is highly recommended..
• 10AN PTFE E85 Fuel Hose Length: 10ft. Inner Diameter: 0.5" (12.95mm). Outside Diameter: 0.62" (16mm) . Please measure before purchase! Fit for AN PTFE hose end fitting ONLY..
• We Provided 12 months warranty from the date of purchased. Free return within....

LS Conversion Engine Swap Mounts - Endxedo Adjustable Swap Motor Conversion Bracket for 1973-1998 Square Body for OBS Chevy GMC Truck 1988-1998 LS1 2WD Small Block LS Swap

• LS Engine Swap Mount Fitment - LS Series Engines: ALL Chevrolet LS Series Engines:LS1, LS2, LS3, LS6, LS7, LS9, GM 4.8L 5.3L 5.7L 6.0L 6.2L(1997-2014),And 4.8L,5.3L,6.0L,6.2L (1999-2013) Vortec Truck Engines. Also Fits LSX LM7 LR4 LQ4 LQ9 L33 LH6 L92 L76 L99 L96 L82 L83 L84 L86 L87..
• Compatible with - 1973-1987 Chevrolet / GMC 2WD, 4WD, Full Size C/K Trucks, Suburban, K5 Blazer, Jimmy, Sierra, Scottsdale, Silverado, Cheyenne, C10, C20, C30, K10, K20, K30. And 1988-1998 “OBS” Chevy / GMC 2WD, 4WD, Full Size C/K Series Trucks & SUVS. Suburban, Tahoe, Full Size 2 door Blazer, Yukon, Silverado, Sierra, C1500, C2500, C3500, K1500, K2500, K3500..
• High Quality Materials - The heavy duty engine mount swap kit is made of premium High Carbon cold rolled steel with high strength and long durability. The surface is painted to prevent rust, and the quality is strictly controlled..
• Installtion - There is slotted for adjustment with engine placement in the engine compartment. It can move the engine from the original bell housing position up to 1/2 inches forward, and up to 1 inch rearward to help you install motor correctly,very e....

New All Balls Fuel Pump Module 47-1029 Compatible With/Replacement For Can-Am Outlander DPS 450 EFI, Outlander DPS 570 EFI 2016-2020, Outlander L 450 EFI 2015-2016, Outlander L 500 EFI 2015

• ➰APPLICATION- All fuel, lube, alcohol, ethanol, coolant and gas for automotive and marine. Black braided PTFE fuel line can be used as fuel injection hose, turbo oil feed and boost line, transmission oil cooler line, EFI fuel line, carb fuel line, ls engine swap fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and other high-temperature and high-pressure applications..
• ➰WORKING ENVIRONMENT-Maximum Working Pressure=725 psi(5 mpa). Bursting Pressure=2175psi(15 mpa). Working Temperature Range=-40℉ to 392℉(-40℃ to 200℃)..
• ➰SIZE- length=20 feet. Inner diameter=0.51 inches (12.95 mm). Outer diameter=0.63 inches (16 mm)..
• ➰MATERIAL- Inner layer: PTFE (Teflon) rubber.
• middle layer: 304 stainless steel wire mesh sleeve.
• outer layer: braided nylon. PTFE fuel lines are more resistant to high temperature and pressure..
• ➰NOTE- PTFE hoses are relatively hard and cannot be bent or folded in half.Double check the hose size before ordering.Professional installation is highly recommended..

SBC Vehicle to LS Engine Swap Mount 1973-1987 Square Body 1988-1998 OBS Chevy C10 C/K Full Size Truck Steel Adjustable Motor Conversion Bracket Adapter Plate Clamshell 1500 2WD Small Block

• ...h a Small Block V8 using Clamshell Mounts. 5.0L 5.7L.
• Compatible with ALL Chevrolet LS Series Engines 1997-2014 (99-2013 4.8L,5.3L,6.0L,6.2L Vortec Truck Engines) LS1, LS2, LS3, LS6, LS7, LS9, GM 4.8L 5.3L 5.7L 6.0L 6.2L. Also Fits LSX LM7 LR4 LQ4 LQ9 L33 LH6 L92 L76 L99 L96 L82 L83 L84 L86 L87..
• Z Whip Adjustable LS Swap Engine Mounts Allow you to swap an LS engine into a 1973 to 1998 GM Chassis that originally had a Small Block Engine that used the Clamshell Style engine mounts. These have ½” Rearward and 2-1/2” Forward Adjustability to help clear Heater Boxes, Brake Boosters, Headers, Oil Pans, ETC..
• Made in The USA from ¼” USA Made Steel Plate, CNC Laser Cut and Bent on a CNC Brake Press Powder Coated Black with High Quality Zinc Coated Hardware. Mounts are marked with a D & P for driver and passenger side of engine and arrows will point to the front of engine..