UTG M1 Carbine Mount Complete with 1\ Rings , Black
- Design for All Standard Pi-catinny Rails. 2 Type of Different Heights 1 inch Scope Mount Rings Contain 2 Pack High Profile Rings and 2 Pack Medium Profile Rings. Perfect for All Standard 21mm Rails. Perfect for Mounting Most Scopes Which Are in 1''/ 25.4mm Scope Tube..
- Four Set Of Two Type 1'' Scope Rings, 2 Pack Medium Profile, 0.5'' Gap from Base of Mount to Bottom of Ring. ( Item height: 1.9''). 2 Pack High Profile, 0.71'' Gap from Base of Mount to Bottom of Ring. ( Item height: 2.0'')..
- Hollowed-Out Design & Built-In Tape Protection: Design In See-Through Style, Provide Potential Visibility For Open Sights, Meanwhile Hollowed-Out Configuration Helps To Release Heavy Duty When Clamping Your Scope. Built-In Tape Inside Per Rings To Prevent From Marring The Scope, Also Prevent Sliding and Holding Postion Accurately..
- Premium Aircraft Aluminum, Solid & Durable: Precision Machining of Aircraft Grade 6061 Aluminum Alloy + High Strength Steel In Black Matte Anodizing Finish, Sturdy & Lightweight Construction, High Quality, Sturdy Construction, Build No Wobble, Offer Durable Safe Performance In The Field..
- Rail Clamp Screw Design & Easy To Install: With 1 Rail Clamp Screw and 2 Scope Clamp Screws Per Side, Ensure Mount Any 1'' Scope Firmly, Just Twist On/Off....
Check StockFeyachi RM26 Picatinny Riser Mount, 0.75 inch 5 Slots Riser Mount for Red Dot Sight
- ✌【Perfect for All 21mm Picatinny Rails】LONSEL 4 set of different heights 1'' scope mount rings include 2 pcs medium profile + 2 pcs high profile in one package. These scope rings fit for all 21mm standard picatinny rails, perfect for mounting most scopes which are In 1''/ 25.4mm scope tube. Available in two styles, A must have scope rings for hunting shooting!.
- ✌【4 Set Of Two Styles 1'' Scope Rings】2 Pcs Medium Profile: 0.5'' gap from base of mount to bottom of ring, Item Height 1.9'', Dimension 1.9 x 1.6 x 0.8 Inch, Weight 2 Oz per ring.
- 2 Pcs High Profile: 0.71'' gap from base of mount to bottom of ring, Item Height 2.0'', Dimension 2.0 x 1.6 x 0.8 Inch, Weight 2 Oz per ring..
- ✌【Hollowed-Out Design & Built-In Tape Protection】Design in see-through style, provide potential visibility for open sights, meanwhile hollowed-out configuration helps to release heavy duty when clamping your scope. Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately..
- ✌【High Quality Aluminum, Solid & Durable】Precision machining of aircraft grade 6061 aluminum alloy + high strength steel in black matte anodizing finish. Sturdy & lightweight construction, build no wobble, offer durable safe p....
Check Stockkemimoto 2Pcs R-ifle Scope Rings 1 Inch Pica-tinny Aluminum Tactical Sporting Optic Rings Rail Optics Mounting Kit Black Solid Steel Shooting Hunting
- 【SIZE AND SHAPE DESIGN】:2 Pieces 1 inch Solid scope rings which made with solid steel material,.
- 【SEMI-SEPARATION DESIGN】:Unlike 6 screws which need to screw with allen wrench which takes a lot of time. Our scope rings with semi-seperation design so that you just need to screw two srews with allen wrench to lock the rings.It will save your time and lock up your scope solidly.
- 【STAR NUT DESIGN】:The install of tactical scope rings was extremely easy and design with the star nut so you can use hand to screw the rings onto your Pica tinny rail easily.
- 【COMPLETE ACCESSORIES】:The scope rings comes with extra 4 screws.
- allen wrench and installation instruction in the package to make installation a breeze.
Check StockOrion 7382 Guide Scope Ring Mounting Bar
- Rigid anodized aluminum bar used for coupling guide scope rings to an astrophotography telescope.
- Attach guide scope rings to this mounting bar, then attach bar in piggyback orientation to imaging telescope.
- Multiple holes along length of mounting bar allow rings to be positioned for long-tube or short-tube guide scopes.
- Pre-drilled holes allow easy attachment to Orion SkyView Pro, Sirius, and Atlas mounted telescopes with tube rings.
- Astrophotography telescope must be equipped with tube rings in order to attach guide scope ring mounting bar.
Check StockAtom Optics 1 inch Riflescope Rings Quick Release Picatinny/Weaver Scope Rings with Quick Detach High/Medium Profile(Medium-1.1 inch)
- 1 inch quick release scope rings fit 20mm dovetail mounts,rails and bases.
- scope rings 1 inch fits standard 20mm Weaver / Picatinny rail, aluminium alloy construction with a matte black finish.
- Scope ring with quick detach/lock lever with full adjustability to fit on any picatinny rail.
- High profile scope rings(item height:2.12"/54mm),the height from the center of the riflescope tube to the picatinny base is 1.3inches(33mm).
- Medium profile scope rings(item height:2"/50mm),the height from the center of the riflescope tube to the picatinny base is 1.1inches(28mm).
Check StockMonstrum Pro Series 7075 Aluminum Scope Rings | 30 mm | Medium Profile
- Monstrum Pro Series scope rings are crafted from 7075 aerospace aluminum - providing greater tensile strength, shear strength, and Brinell hardness than typical 6061 aluminum scope rings.
- Comes with stainless steel Torx mounting hardware, including a T25 Torx Plus wrench and a T25 Torx Plus Bit, for easy precision mounting without stripping of bolts.
- Pro Series scope rings are treated with a Type III Hard Anodized Finish versus a Type II for previous generation scope rings for added protection against scratches and blemishing.
- Available in 1 inch or 30 mm diameter. Compatible with both Picatinny or Weaver mounting bases..
- All Monstrum products are now protected by Monstrum’s lifetime guarantee.
Check StockMonstrum Pro Series 7075 Aluminum Scope Rings | 1 inch | Medium Profile
- Monstrum Pro Series scope rings are crafted from 7075 aerospace aluminum – providing greater tensile strength, shear strength, and Brinell hardness than typical 6061 aluminum scope rings.
- Comes with stainless steel Torx mounting hardware, including a T25 Torx Plus wrench and a T25 Torx Plus Bit, for easy precision mounting without stripping of bolts.
- Pro Series scope rings are treated with a Type III Hard Anodized Finish versus a Type II for previous generation scope rings for added protection against scratches and blemishing.
- Available in 1 inch or 30 mm diameter. Compatible with both Picatinny or Weaver mounting bases..
- All Monstrum products are now protected by Monstrum’s lifetime guarantee.
Check StockPRI Polymer Ring Inserts - 30mm to 1 Inch. by Unknown
- Monstrum Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld.
- 30 mm diameter rings for mounting standard 30 mm rifle scope tubes30 mm diameter rings for mounting standard 30 mm rifle scope tubes.
- Picatinny mount base mechanism comes equipped with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil | Not compatible with Weaver mounts.
- Scope rings come with an integrated level bubble mechanism for quickly checking if your rifle is lined up square with your target.
- Available in four different heights to match the needs of any shooter: 0.85 inch, 1.00 inch, 1.20 inch, and 1.35 inch.
Check StockWheeler Scope Ring Alignment and Lapping Kit, 34mm for Scope Mounting, Accuracy, Gunsmithing
- FUNCTION: Lapping the inside scope rings will reduce or eliminate any shifting of the scope inside the rings.
- RELIABLE: Alignment bars provide the perfect alignment of both rings and will also diagnose any vertical or horizontal misalignments.
- CONVENIENT: Lapping handle attaches to bars for easier use.
- INCLUDES: 220 grit lapping compound, alignment bar, lapping bar.
Check StockBARSKA 4X20 Rimfire Riflescope
- Precision Aiming: The 4x magnification scope features 1/4 MOA click adjustments for precision accuracy..
- Quality Construction: The scope comes with coated optics, providing impressive viewing clarity. Tube diameter 3/4"..
- 30/30 Reticle: The scope comes with 30/30 crosshair reticle for easy targeting, ideal for any type of shooting..
- Parallax Free: The scope is parallax free at 50 yards, making it easy to target at closer range..
- Accessories: The scope comes with set of 3/8" dovetail rings, lens cover, and lens cloth..
- Included components: Mounting Rings, Lens Covers and Lens Cloth.
Check StockMonstrum Rifle Scope Throw Lever | 46 mm Diameter | Standard
- Throw Lever built for attachment to variable power rifle scopes allowing for smooth and controlled adjustment of your scope magnification.
- Available in three sizes - 43 mm, 44 mm, and 46 mm diameter - for compatibility across most scope models and sizes.
- Available in notched or standard versions for magnification rings of different form factors.. Notched versions have a concave slot inside the lever to accommodate magnification rings with an integrated throw lever. Standard versions have a protruding wedge to secure more tightly to grooved magnification rings..
- Installs securely around the scope magnification ring. Please refer to the measurement instructions before purchasing to ensure a proper fit..
- All Monstrum scope accessories come with a lifetime guarantee..
Check StockCVLIFE 1’’ Dovetail Scope Rings for 3/8’’ or 11mm Dovetail Rails, High Profile Scope Mounts, 2Pieces
- ✔Double dovetail rings for 3/8’’ or 11mm dovetail mount specialized scope mount for .22/Airgun..
- ✔ The dovetail ring is for most scopes which are in 1''/ 25.4mm scope tube..
- ✔ High profile, 20.4mm(0.8 in) from top of the dovetail rail to bottom of rings ( Item height: 1.9'')..
- ✔ Built-In Tape Inside Per Rings To Prevent From Marring The Scope, Also Prevent Sliding and Holding Postion Accurately..
- ✔ With two rail clamp screws and two scope clamp screws, Precision and Repeatable Alignment..
Check Stockoupuntoe Scope switchview Throw Lever Fit 44mm Diameter Magnification Ring
- Throw Lever built for attachment to variable power rifle scopes allowing for smooth and controlled adjustment of your scope magnification.
- Available in three sizes - 43 mm, 44 mm, and 46 mm diameter - for compatibility across most scope models and sizes.
- Available in notched or standard versions for magnification rings of different form factors.. Notched versions have a concave slot inside the lever to accommodate magnification rings with an integrated throw lever. Standard versions have a protruding wedge to secure more tightly to grooved magnification rings..
- Installs securely around the scope magnification ring. Please refer to the measurement instructions before purchasing to ensure a proper fit..
- All Monstrum scope accessories come with a lifetime guarantee..
Check Stock