Categories

Best Electric Measuring Calibrator

CEM BX-500 Portable IR Dry-Well Infrared Temperature Calibrators 122 to 932℉（50-500℃

  • The mini infrared calibrator is mainly structured by 58 mm diameter target assembly and dry-well temperature system controlled by microcomputer..
  • External reference thermometer is metal cone with good heat-conducting ability , on the surface of thermometer there is a oxide film with emissivity 0.95..
  • The calibrator is applied a class-A PT100 as a sensor with a temperature control system and wind-cold device . The calibrator has rapid heating and cooling function and is switch able ℃/℉ which can be used in different temperature unit calibration..
  • The calibrations can be done over a range of 50℃ to 500℃..
  • Temperature display and stability resolution is 0.1 degree..
Check Stock

Negative Pressure Gauge Calibrator for HVAC, Laboratories, Room Pressure Monitoring Model: ACE PSI-PP1 (Static Pressure Pump Only)

  • Calibrator: Static Pressure Pump Calibrator (PSI-PP1) | Knobs: 2 No. s for Fine & Coarse Pressure Adjustment |.
  • | Pressure Range: Upto 1 Bar | Vacuum Range: Upto 400 mm.H.g | Pressure Ports: 2 Pressure Ports with Ferrule Fitting, 1 Each for Master Gauge & Instrument Under Calibration |.
  • Approximate Volume: 400 C.C | Maximum Pressure: 100 PSIG | Maximum Vacuum: 80% | Adjustment: Coarse & Fine Control |.
  • Outlet Connection: One 1/4” BSP or Ferrules Union | 1 Year Manufacturing Warranty |.
  • Supply Scope: 1 Unit of Pressure Gauge Calibrator and Instruction Manual | Applications: HVAC, Filter Monitoring, Room Pressure Monitoring, Laboratory..
Check Stock

Hand Operated Pressure and Vacuum Pump Calibrator Only Hand Pump for Calibration Labs Field Calibration and Pressure Transmitter Calibration Model AI-DP1-2200

  • Model: AI-DP1-2200 | Measuring Parameters: Pressure and Vacuum | Model: Hand operated.
  • Vacuum Range: Ambient to -0.9 Kg/Cm² | Pressure Range: Ambient to 30 Kg/Cm² (30 Bar).
  • Weight Approx. 1.5 Kgs. | Material Of Construction: Aluminium and Stainless Steel |.
  • Supply Scope: 1 Unit of Calibrator, 3 Nos Reducers (1/4", 1/2", 3/4").
  • Applications: Field Calibration, Calibration Labs, Pressure Gauge Calibration, Pressure Transmitter Calibration..
Check Stock

Pressure and Vacuum Hand Pump Calibrator Pressure and Vacuum Gauges Alongwith Pump for Calibration Labs and Field Calibrations Model AI-DP1-2200

  • Measuring Parameters: Pressure and Vacuum.
  • Vacuum Range: Ambient to -0.9 Kg/Cm² | Pressure Range: Ambient to 30 Kg/Cm² (30 Bar) | Master Gauge ( Vacuum & Pressure) Range: -1 to 25 Bar.
  • Material Of Construction: Aluminium and Stainless Steel | Weight Approx. 1.5 Kgs..
  • Supply Scope: 1 Unit of Calibrator, 1 Unit of Master Gauge (Range: -1 to 25 Bar), 3 Nos Reducers (1/4", 1/2", 3/4"), Instruction Manual and....
  • Applications: Calibration Labs, Field Calibration, Pressure Gauge Calibration, Pressure Transmitter Calibration..
Check Stock

Fluke 725 Multifunction Process Calibrator

  • The Fluke 725 Multifunction Process Calibrator is a powerful, yet easy-to-use field calibrator. Use the measure and source functions to test and calibrate almost any process parameter.
  • Small, streamlined shape, rugged, reliable design stands up to field use.
  • Easy to read measure/source screen lets you view input and output simultaneously.
  • Measure volts, mA, RTDs, thermocouples, frequency, and ohms to test sensors and transmitters.
  • Source/simulate volts, mA, thermocouples , RTDs, frequency, ohms, and pressure to calibrate transmitters.
Check Stock

ennoLogic Volt mA Loop Process Calibrator eC380V - 0-20V and 4-20mA Signal Generator Simulator – Portable Precision Volt Millivolt and mA Generator and Meter for Transmitters Current Loops PLC

  • VERSATILE AND ACCURATE VOLT MA CALIBRATOR: Signal generator, simulator and volt / mA meter for calibrating, testing and repairing milliamp loops, PLC....
  • BUILT-IN 24V LOOP SUPPLY lets you power and read a device or transmitter without needing another multimeter. This greatly simplifies testing 2-wire....
  • MEASURE VOLTAGE OUTPUT SIGNALS from process devices and sensors with two input ranges of 0-100mV (0.01mV resolution) and 0-20V (1mV resolution) with....
  • GENERATE PRECISE TEST VOLTAGES AND CURRENTS for testing loops, transmitters, data logger, meters or any devices that measure 4-20mA currents or sensor....
  • The eC380V Volt/mA calibrator is powered by six AAA batteries (included). The package includes one eC380V calibrator, 6 AAA batteries, carrying case,....
Check Stock

Pneumatic Pressure Calibrator by Ace Instruments for Testing & Calibration of Pressure & Vacuum Gauges Model: DPI-2200

  • Model: AI-DP1-2200 | Measuring Parameters: Pressure and Vacuum | Vacuum Range: Ambient to -0.9 Kg/Cm² | Pressure Range: Ambient to 30 Kg/Cm² (30 Bar)..
  • Material Of Construction: Alluminium and Stainless Steel | Weight Approx. 1.5 Kgs..
  • Instructions for use: DO NOT operate this to generate pressure above 30 BAR. Use this unit only for Testing work Use this unit in environments specified in the manual The life of spares such as O-rings can be shortened by exposure to atmospheric conditions. For storage use an airtight container |.
  • Never remove the SS fittings fitted in the pump. These are fitted and tested for leakage. Use of Teflon tape on these parts after removal and refixing will damage the threads in the pump and our guarantee will become null and void.
  • Supply Scope: 1 Unit of Calibrator, 3 Nos Reducers (1/4.
Check Stock

ennoLogic Volt mA Thermocouple Loop Process Calibrator eC370T - 0-20V and 4-20mA Simulator – Portable Millivolt mA and Temperature Signal Generator and Meter for Transmitters Current Loops PLC

  • VERSATILE AND ACCURATE VOLT MA THERMOCOUPLE CALIBRATOR: Signal generator, simulator and volt / mA meter for calibrating, testing and repairing milliamp loops, thermocouples, PLC, temperature control and HVAC systems. Easily generate precise test signals for current and voltage devices (mA, mV, V, Celsius and Fahrenheit ranges)..
  • NUMERIC KEYPAD for ease and flexibility in setting output signals configuring options. HOTKEY programming for each numeric key (long-press immediately outputs user-configured voltage, current or temperature signal). RAMP AND LADDER OUTPUT FUNCTIONS can be custom configured. BUILT-IN 24V LOOP SUPPLY lets you power and read a device or transmitter without needing another multimeter. This greatly simplifies testing 2-wire current loops..
  • MEASURE VOLTAGE OUTPUT SIGNALS from process devices and sensors with two input ranges of 0-100mV (0.01mV resolution, 0.06% accuracy) and 0-20V (1mV resolution, 0.08% accuracy). MEASURE CURRENT TRANSMITTERS within a range of 0 to 24mA with 0.001mA resolution and 0.08% accuracy. MEASURE THERMOCOUPLE TEMPERATURES within a range of -250°C to +1800°C and resolution of ±0.7°C to ±2°C (range and resolution depends on thermocouple type, supported are type K, J, E, T, N, S, R, and B.).
Check Stock

TSI Quest (Formerly 3M) eg4-D-AC3 Personal Noise Dosimeter, Dock, and Calibrator

  • Kit Includes: EDGE 4 Dosimeter with 1/4-Inch Microphone Two Windscreens, AC-300 Calibrator, Single Docking Station, Calibrator Adapter, USB Cable, Power Supply and Storage Case.
  • Displays SPL, dose, Lavg, Leq, TWA, maximum level, minimum level, peak level, exposure, and run time… all while in Run mode.
  • Independent selectable thresholds from 70 to 90dB or none, independent exchange rates for each dosimeter (3, 4, or 5 dB), and independent criterion levels from 70 to 90 dB in 1dB increments.
  • Rechargeable lithium polymer battery provides more than 60 hours of run time, and only needs to be replaced every three years.
Check Stock

Ace Instruments Static Pump, DP Pressure Gauge Calibrator for HVAC, Laboratories, Calibration Labs Model: ACE PSI-PP1 (Static Pressure Pump with Master Gauge)

  • Calibrator: Static Pressure Pump (PSI-PP1) | Knobs: 2 No. s for Fine & Coarse Pressure Adjustment |.
  • Pressure Range: Upto 1 Bar | Vacuum Range: Upto 400 mm.H.g | Pressure Ports: 2 Pressure Ports with Ferrule Fitting, 1 Each for Master Gauge & Instrument Under Calibration |.
  • Approximate Volume: 400 C.C | Maximum Pressure: 100 PSIG | Maximum Vacuum: 80% | Adjustment: Coarse & Fine Control |.
  • Outlet Connection: One 1/4” BSP or Ferrules Union | 1 Year Manufacturing Warranty |.
  • Supply Scope: 1 Unit of Pressure Gauge Calibrator and Instruction Manual | Applications: HVAC, Laboratories, Calibration Labs..
Check Stock

Portable Electronic Tension Calibrator ABS LCD Digital Display Shakeproof Tennis Badminton String Tool Black

  • High Performance: Electronic tension calibrator with high performance embedded microcomputer as the core, accurate weighing, stable performance, vibration resistance, high practicability..
  • Manufacturing Material: The case of hand held tension calibrator is made of ABS engineering plastic, which is strong and durable, which can effectively prolong its service life..
  • Exquisite Appearance and Portable: Appearance is exquisite and convenient to carry. LCD digital display design, which can know relevant data in a timely and effective manner..
  • Circuit Damage Prevention: If the sign of low power is displayed, please replace the battery in time. If the electronic weighing device is not used for a long time, take out the battery to avoid damage to the circuit due to battery leakage..
  • Unit Conversion: Press the "UNIT" key, and the weighing instrument will perform cycle conversion among the four units of KG, lb, catty, and oz..
Check Stock

CEM BX-150 Dry-Well Temperature Calibrator 33°C to 300°C

  • The calibrator can operate at very high temperature . Precautions must be taken to prevent personal injury or damage to surrounding objects . probes may be hot when removed from the units and should be placed on a heat resistant surface . The unit may remain hot for several minutes after switching off .Do not switch off if temperatures above +100℃. Allow to cool before storage ..
  • Caution must be taken when removing probes and inserts from the units . if the unit is set at a high temperature the inserts will be very hot and could cause burns probes and inserts only on a suitable heatproof surface ..
  • Only place temperature probes in dry-block holes . These units are designed to be operated dry . Do not sprinkle and liquid into any of the dry-block holes ..
  • These dry-blocks are designed to be rugged and durable but do contain electronics. Do not operate in dirty , dusty or very damp enviroment or near liquids that could present a hazard from electric shock..
  • The units are ideal for use in a variety of industrial and process applications .Each unit is supplied with a traceable certification of calibration of calibration showing actual test data , which can be used as part of quality assurance programmes ..
Check Stock

ERP Top Burner Knob for Frigidaire, Tappan, AP2126481, PS439784, 316220000

  • Includes 2 x 316048414 (6'' chrome GE burner drip pans) measuring 7.5" in diameter and 2 x 316048413 (8'' GE chrome oven burner drip pans) measuring 9.3" in diameter. The electric oven drip pans are made of durable chrome plated steel with environmentally friendly plating technology. Silver color..
  • 6" 316048414 and 8" 316048413 electric ovens fit most Ken-more, Tappan, Fri-gidaire, Cro-sley, White-Westinghouse inset electric stove tops. The chrome stove top drip tray fits the stove properly and prevents the drip tray element from wobbling, thus preventing the cookware from shaking on the stove. If your old drip tray is dirty or rusty, this replacement will fix it and make your stove look like new..
  • 316048413 Stove burner pan replacements:316048403, 5301317238, 5303013588, 5303285960, 5303935054, A316221201, K001307596, AP2124664, etc. 316048414 Electric stove burner drip pan replacements. 316221101, 316221301, 5303013589, 5303205285, 5303206604, 5308005369, 5308011440, A316221101, P062005, etc. Installation precautions: Prevent burns. Before installing the drip tray of the electric stove, wait until its surface has cooled to a certain level..
  • Electric stove drip tray speeds up cooking time and saves energy costs. Th....
Check Stock