Categories

Best Electric Metal Shear

PacTool SS424 Backerboard Shear - Fiber Cement Cutting -Contractor Grade- Professional Power Tools

  • CONTRACTOR TOOL: Cutting is finally easy with this precision-machined shear head with a contractor-grade 6.5-amp motor, capable of powering through to....
  • CEMENT BOARD: Get the tile project done with our electric metal shear. This tool is specifically designed to shear the backer board rather than cut so....
  • CUT OUT TOOL: No more score and snap. This tool's versatility makes it ideal for inside corner cuts, with far fewer broken corners. Equipped with....
  • SMART SHEARS: Developed to minimize harmful airborne dust while using it, this product allows workers to cut and install both inside and outside of....
  • PACTOOL: Trusted for decades, we are the leaders in specialized construction, renovation, and remodeling designs. Our cutting-edge product line....
Check Stock

DNYKER Cordless Electric Pruning Shear, Branch Cutter with 2 PCS Rechargeable 2Ah Lithium Battery, Tree Branch Pruner with 30mm (1.2'') Cutting Diameter, Branch Cutter for Gardening

  • [32mm Adjustable Cutting Diameter]: The professional Electric Pruning Shear can provide a cutting diameter of up to 32mm. You will hear a buzzing sound after pressing the switch, and the machine will automatically adjust the cutting diameter (the range is 25-32mm). The DNYKER Pruning Shear can be easily applied to gardens, parks, orchards and other places..
  • [SK5 Manganese Steel] The main material of manganese steel is manganese alloy, which is a high-strength/hardness material. The 13% manganese content makes the electric cutter head harder and more resilient. For users, SK5 cutter head will bring 2-3 times of the service life. We additionally provide an identical SK5 cutter head in the package. It only takes a few minutes to replace the cutter head according to the manual..
  • [Safety Assurance] This product cannot be used until you press the power button and the switch twice, wait for the cutter head moving. Pruning Shear will stay sleeping mode after 15 seconds without any operation. The two settings can effectively avoid possible dangers due to wrong operation..
  • [300W & Fast Charge] The 300W high-power brushless motor can ensure more smooth operation and fewer resistance. We have greatly increased the battery life of the Pruning Shear. It only tak....
Check Stock

SHALL Electric Metal Cutting Shear, 4.0-Amp Corded Sheet Metal Cutter, Variable Speed with 360 Degree Swivel Head, Continuous Cutting, Clean Cut for 14GA Sheet Metal & 16GA Stainless Steel, 2500 SPM

  • Clean cut: Double cut design for creating a 1/4-inch curled metal thin strip during operation by the double-cut blade. Compared with traditional manual metal shears and single cut shears that creating lots of tiny metal chips and wastes, ours 4-amp electric power metal shear delivers fast clean cut without creating extra wastes and air-borne dust, smooth as silk. Besides, ours key advantages are flexibility in cutting curves, efficiency, accuracy, durability and quality finish.
  • 360 degree swivel head: Cutter head can be adjusted to a desired position for delivering comfortable cuts from any angle or direction. Offer convenience for cutting straight lines, large curves, circles and irregular shapes. Loosen the three hex head bolts, firmly grip the cutter head and twist it to the desired position then tighten the three hex bolts.
  • Variable speed operation: Speed (0-2500 SPM) is allowed to vary by users. Press trigger lightly to cut slowly and press trigger heavily to cut quickly. For stop cutting, just release the trigger to turn off the shear. Flexible and easy to control the cutting speed. Variable Speeds for users to cut specific materials in different situations.
  • Cutting capacity: Cutting up to 14 gauge sheet metal and 16 gauge stainless steel. In add....
Check Stock

2022 New Electric Drill Plate Cutter Attachment Drill Attachment Metal Cutter Sheet Metal Cutter Drill Attachment Double Headed Sheet Metal Nibbler Cutter for Cutting Metal Plates Hard Materials

  • 【Electric Drill Plate Cutter】 : Our electric drill plate cutter has a double-headed metal plate cutter, making cutting easier and working faster,....
  • 【With Superb Performance】 : Our electric drill cutter is suitable for any drill that works between 1500-3000, easier and more powerful than....
  • 【Compact Design】: The size of the drill attachment, in particular, is designed to be very compact, making this drill attachment easy to store away....
  • 【Easy To Use】: Use this innovative metal cutter attachment to quickly turn your drill into an electric shear that fits perfectly on the chuck of....
  • 【Wide Range Of Applications For The Cutter】: multifunctional electric drill plate, ideal for automotive and house repairs, such as metal roof....
Check Stock

Air Pneumatic Nipper Power Metal Wire Shear,Cutting Wire Dia 0.1-1.5mm,Crimping Pliers Metal Shear Cutter Scissor Cutting Wire Air Shear Cutter Tool

  • Powerful, handheld metal cutting shear cuts through 0.1mm-1.5mm.
  • Allows working pressure at 0.3-0.6 MP，Size:31*150mm.
  • Powerful, Pneumatic Metal Cutting Shear Copper (0.8mm) and Iron (0.5mm) and fast free speed of 3500 RPM.
  • Suitable for all kinds of copper, iron, plastic, leather, straw mat, refrigerant pipe, use electric heat pipe, glass fiber and other places..
  • Light weight and high base, single hand operation,New version, high strength, wear resistant, long service life.
Check Stock

VEVOR Hand Plate Shear 12 Manual Metal Cutter Cutting Thickness1/4 Inch Max Metal Steel Frame Snip Machine Benchtop 1/2 Inch Rod for Shear Carbon Steel Plates and Bars

  • Shear Capacity: This 12" hand plate shear is designed to cut 1/4" sheet steel, 2-3/4" x 1/4" flat steel and 1/2" rod steel.
  • Chosen Material: Solid steel frame metal shear ensures safety. Blades made of high carbon steel for long-term usage.
  • Long Handle: he metal shear cutter is equipped with a long lever arm with compensating spring for maximum leverage, saves effort efficiently.
  • Flexible Usage: This manual shear can also be fixed onto a workbench, thus making cutting process smooth and easy.
  • Stable Operation: Compact metal frame provides stability. Adjustable clamp inside this metal shear ensures easy adjustment and operation.
Check Stock

Father's Day Gift, QYTOOL Cordless Electric Pruning Shears with 1 Inch Cutting Diameter, Pruning Shears Battery Powered, Electric Pruner with 2 Ah Rechargeable Battery and Matching Tools（Blue）

  • 【Super sharp and powerful】 Professional electric pruning shears with blades forged from SK5 high carbon steel. The blades are very sharp and durable, the cordless pruning can easily cut hard branches up to 0.98 inches (25 mm) without causing damage, driven by brushless motor for better efficiency and longer service life. In addition, we provide you with an extra replacement blade..
  • 【Able to work anywhere】The electric pruning shear cordless weighs about 900 grams (1.98 pounds), shockproof and non-slip, ergonomic design, reduce repetitive hand movement injury hand fatigue wrist strain injury, also very suitable for arthritic hands. The tree trimmer with a portable carrying case, easy to carry when you work in the garden or orchard..
  • 【Keep working for a long time】 Professional pruning shear are equipped with two 16.8v, 2A rechargeable dual lithium batteries to ensure longer working hours, the machine can work for 4-6 hours, while the portable power charging case the tree pruner still allows you to have extra energy. Please make sure the batteries are fully charged before use..
  • 【Multi-functional use】 The electric pruning shear solve the problems of traditional manual pruning shears' laborious and small cutting range, and the pruning qua....
Check Stock

PacTool SS701 Snapper Shear - Sheet Metal Shears - Sheet Metal Cutter Drill Attachment - Cut Up to 18-Gauge Galvanized Steel, Aluminum, and Copper - Sheet Metal Tools - Carpenter Tools and Accessories

  • WORK SMARTER: The design of this electric drill shears attachment minimizes metal chips while in use, allowing professionals and DIYers to cut and install with ease, increasing efficiency and keeping the job site safe..
  • ERGONOMIC ADVANTAGE: The universal shear head’s ability to rotate 360° provides a user-friendly experience compared to traditional shears. Use the snapper shears to cut straight, right-angle, curve cuts, and cut circles down to 3 inches in diameter..
  • PROFESSIONAL QUALITY: This innovative shear works with any 18-volt or higher cordless drill and allows you to easily navigate while cutting. PacTool metal cutting tools are built to a standard demanded by commercial contractors...
  • POWERS THROUGH METAL: Cuts galvanized steel, aluminum, copper up to 18 gauge, and stainless steel up to 20 gauge. The PacTool SS701 cutting attachment slices through steel wire, mesh, vinyl, aluminum, siding, flashing, metal roofing, and trim coil..
  • REPLACEABLE BLADES: Detach and replace worn-down tempered steel blades with new replacements to keep the job moving. Our replacement blades are....
Check Stock

KAKA Industrial HS-12 12-Inch Sheet Metal Plate Shear, Solid Steel Frame, Mounting Type Metal Shear,For Cutting Sheets and Bars, High Precision Manual Hand Plate Shear

  • SOLID STEEL FRAME ENSURES STABILITY AND SAFETY. KAKA Industrial 12-inch metal shear is equipped with a heavy duty steel frame will safeguards the stability during the cutting process. The high quality design also can have a long term usage life.
  • CAN CUT MULTIPLE MATERIALS. This 12-inch metal shear is designed to cut thick sheet steel at 3/16-inch, flat-steel at 2-3/4x3/16-inch as well as round steel at 1/2-inch.
  • WORK HOLD DOWN WITH EASY ADJUSTMENT AND EASY OPERATION. An adjustable work hold down setting is inside this metal shear that will ensures easy adjustment and easy operation.
  • ARCHED TOP BLADE ALLOWS EFFORTLESSLY CUTTING. The mounting-type metal plate shear has an arched top blade that will make the cutting process smoothly and effortlessly.
  • LONG HANDLE GUARANTEES EXTRA LEVERAGE AND FREE BACK PAIN. The beauty of this 12-inch metal shear is that it has a long-handle, which will saves a lot of time and energy to do a cutting.
  • if you have a back pain, this shear definitely will alleviate that and make the cutting more enjoyable.
Check Stock

Dirnatel Ts3 New Electric Drill Plate Cutter,Metal Nibbler Drill Attachment with Adapter, Variable Speed Swivel Head Electric Metal Cutter Shear

  • [Strong Cutting Ability] Dirnatel TS3 Metal cutter tool has a faster cutting speed than other sheet metal cutting tools, powerful than ordinary scissors and knives..
  • [Usable range]: Sheet metal nibbler With a high hardness cutting head,this nibbler attachment can handle iron sheet(0.1-1mm),steel sheet(0.1-0.8mm),copper sheet(0.2-1.2mm),aluminum sheet(0.2-1.2mm)..
  • [Easy to Use]: Metal cutter attachment quickly transforms your drill into an electric shear that fits perfectly on the chuck of your drill. with an adapter handle, adapt to a variety of different electric drills..
  • [Matters need attention] The metal nibbler drill attachment board cutting machine is suitable for cutting flat sheet metal less than 1mm. Do not cut with angular, special shape, welding sheet metal and non-metallic materials.If it is stuck, set the drill bit to reverse to automatically exit..
  • [After-sales service] : After purchasing Dirntel brand products, we will provide you with up to 2 years of after-sales service, if you have any questions, please contact us. Thank you very much!.
Check Stock

Sheet Metal Attachment, Metal Nibbler Saw Cutter Electric Scissors Power Drill Cutting Tool Double Head

  • 【Feature】：It is not necessary to remove or replace the existing drill chuck as the drive shaft of the F2008-1 inserts directly into a standard 3/8"" or larger capacity drill，Hexagon handle does not slip, precision operation..
  • 【Cutting Capacity】:Tool head hardness up to 58-60: this cutter is more convenient than others, cutting speed is excellent, and no burr。small body, great action, strong power, easy to conquer the work / life problems.
  • 【Easy To Install】: electric scissors converts your power drill into a power shear. To operate this time-saving tool, simply insert the directly into any 3/8-inch chuck of a standard 1200 RPM A/C or cordless drill..
  • 【Safe & Durable】: this cutter is more convenient than others, cutting speed is excellent, and no burr.metal cutting shears sheet won't scratch your hands. And it's easy and convenient to operate..
  • 【Cutting applications】: Metal sheet cutter head is a multi‑functional cutter, it has universal 7mm hex shank for electric drill replacement. Cutting applications include both ferrous and non-ferrous sheet metals, metal roofing/building panels, vinyl, steel mesh, duct work, even the thick metal of furnace jackets, equipment enclosures or automotive body panels..
Check Stock

Metal Nibbler Drill Attachment with Adapter, DIY Metal Drill Attachment, Sheet Metal Knife for Cutting Iron, White Sheet, Steel,Copper, Aluminum

  • [Strong Cutting Ability] This metal nibbler drill attachment has a faster cutting speed than other sheet metal cutting tools, suitable for any drill bit working between 1500-3000, easier and more powerful than ordinary scissors and knives, it can save a lot of work time, Improve efficiency..
  • [Electric Drill Plate Cutter Accessories] With a high hardness cutting head, this nibbler attachment can handle iron sheet(0.2-1mm), white sheet (0.3-1mm), steel sheet(0.2-0.8mm), copper sheet(0.3-1.2mm), aluminum sheet(0.3-1.2mm)..
  • [Easy to Use]: This metal cutter attachment quickly transforms your drill into an electric shear that fits perfectly on the chuck of your drill. And it also comes with an adapter handle, which can adapt to a variety of different electric drills. The drill bit is very compact, easy to store when not in use, perfect for your toolbox or locker and easy to carry..
  • [Multi-purpose application]The metal nibbler drill attachment board cutting machine is suitable for cutting flat sheet metal less than 1mm. It can not cut sheet metal with blending, ribbed, special-shaped or welded shape or non-metallic material. It can not be cut forward if it gets stuck, set the drill to reverse for automatic exit..
  • [Points to Note]We do not recommend cutting stai....
Check Stock

Cordless Pruning Shears, Electric Pruner with 7.5 Foot High Reach Extension Pole, Tool Belt, 2 Pack 25V Lithium Battery, SK5 Blades, 1.6 Inch Cutting Diameter, LCD Display Screen

  • THOUGHTFUL FEATURE GPS51 electric pruner comes with a 75" long telescopic rod that can extend up to 7.5 foot for high branches trimming. It has a LCD display screen to help you keep an eye on the power and cutting times. It is also lightweight and compact (3 pounds with battery), easy to put into the included tool belt which has 2 pockets for placing both the shear and baterry. There is a small hole at the end of the pruner for convenient hanging storage with a string..
  • LONGER SERVICE The Built-in 600W brushless motor offers 10 times the service life of a conventional brush motor. The GPS51 package includes two 25V-2AH lithium batteries and a 2-hour fast charger, which can charge both batteries simultaneously. These batteries lock securely into the shear with a simple twist, and can provide sustained use for up to 12 hours. Each battery also has a built-in USB port, which allows it to be used as an alternate power source for other applications..
  • SHARPER SK5 BLADES The T TOVIA electric pruning shears use advanced SK5 high-carbon steel blades, making them super sharp, rust-free, and very durable. The cutting diameter can be re-set in seconds with a pull of the trigger between large (1.6-in./40mm) and medium (1.1-in./27mm). A second SK5 cutting blade is i....
Check Stock