BOSS Audio Systems R2000M Monoblock Car Amplifier - 2000 Watt Amp, 2/4 Ohm Stable, Class A/B, Mosfet Power Supply, Great for Car Subwoofers
- ...00 Watts Max x 1 @2-Ohms, 1000 Watts Max x 1 @4-Ohms.
- Class A/B Topology - Class A amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class B amplifiers have no current flowing through its outputs with no audio signal.
- Mosfet Power Supply - A MOSFET is basically an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry.
- Variable Low Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction.
- Variable Bass Boost - Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
- Variable Gain Control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier.
- Low & High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers.
- Specs - Dimensions: 11.5 x 10.44 x 2.25, Weight 7.8 lbs..
Check StockPlanet Audio MB2200.5D 5 Channel Class D Car Amplifier - 2200 Watts, 2 Ohm Stable, Digital, Full Range, Mosfet Power Supply, Great for Speakers and Subwoofers
- ... energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced power waste, smaller heat sink, compact circuitry.
- Bridgeable - Dramatically increase the power output to you speakers and subwoofers by connecting two amplifier channels.
- Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry.
- Variable Bass Boost - Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
- Variable High-Pass Crossover - Speakers reproduce sound based on high, low or mid-range frequencies. A variable high pass crossover gears specifically towards “highs” such as all size speakers including mid ranges and tweeters.
- Variable Low Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction.
- Specs - Dimensions: 15.01” x 5.12” x 1.7”, Weight: 5.6 lbs..
- Warranty - Planet Audio provides a powerful 6-year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.Com. We strongly e....
Check StockAudioControl The Epicenter
- In Dash version of The Epicenter Bass Restoration Processor Built-in 160 dB capable microphone.
- Hi-SPL display Selectable display switching monitors vehicle electrical system ParaBass equalization circuitry.
- Line level and active speaker level inputs accommodates OEM integration Balanced differential inputs Switchable illumination (blue or red)½ DIN chassis includes mounting brackets.
Check StockBrute Magnetics | 2400 lb Pull Force Huge Rare Earth Neodymium Fishing Magnet | 4.21' Double Sided Powerful Magnet, Eyebolts + Threadlocker | Strong Magnets for Fishing in Lakes or Rivers
- ... x 1 @2-Ohms, 1000 Watts Max x 1 @4-Ohms.
- Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal.
- Mosfet Power Supply - A MOSFET is basically an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry.
- Variable Low Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction.
- Variable Bass Boost - Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
- Variable Gain Control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier.
- Low & High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers.
- Specs - Dimensions: 11.5” x 10.44” x 2.25”, Weight 7.8....
Check StockBOSS Audio Systems R1100MK Car Amplifier and 8 Gauge Wiring Kit - 1100 Watts Max Power, 2-4 Ohm Stable, Class A/B, Monoblock, Mosfet Power Supply, Remote Subwoofer Control
- ...0 Watts Max x 1 @2-Ohms, 550 Watts Max x 1 @4-Ohms.
- Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal.
- Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry.
- Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction.
- Switchable Bass Boost - Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
- Specs - Dimensions: 9.1” x 10.4” x 2.3”, Weight: 4.4 lbs..
- Warranty - BOSS Audio Systems provides a Powerful 6 Year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.Com. We strongly encourage professional installation of this product to ensure proper and safe functionality.
Check StockBOSS Audio Systems PT1600 2 Channel Car Amplifier - 1600 Watts, Full Range, Class A/B, 2-8 Ohm Stable, Mosfet Power Supply, Bridgeable
- ...our speakers but also your subwoofers.
- Class A/B Topology – Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal.
- Mosfet Power Supply – A MOSFET is an electrical switch that allows the flow of electrical current It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry.
- Variable Gain Control – The gain control is not for adjusting volume It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier.
- Variable Bass Boost – With Variable Bass Boost you have the control of exactly how much BASS you want to pump out to your subwoofer(s).
- Bridgeable – Dramatically increase the power output to you speakers and subwoofers by connecting two amplifier channels.
- Specs – Dimensions 14” x 10 3” x 2 3” Weight 9 lbs.
- – BOSS Audio Systems provides a powerful 6 year Platinum Online Dealer so long as the purchase is made through We strongly encourage professional installation of this product to ensure proper and safe functionality.
Check StockPIONEER TS-WX1210AM 12” 1300 Max Power & Nilight - 50004R 120 Pcs/60 Pairs Quick Splice Wire Terminals T-Tap Self-Stripping with Nylon Fully Insulated Male Quick Disconnects Kit 2 Years Warranty
- Product 1: 1300 W Max Power (350 W Nominal) Pre-loaded 12" Injection Molded Polypropylene (IMPP) Composite Cone Construction Subwoofer.
- Product 1: Built-in 300 W Max (150 W RMS) Class D amplifier.
- Product 1: Ported enclosure design for powerful, deep and accurate bass response.
- Product 1: Variable Bass Boost (0 to +12 dB, 20Hz to 130Hz).
- Product 2: Self-Stripping electrical tap connectors - Nilight self-stripping electrical t-tap connectors makes tapping into an existing wire a quick and easy job.
Check StockRockford Fosgate R2-500X1 Prime 500-Watt Mono Amplifier
- The R2-500X1 full-range class-D mono amplifier (1.9″ x 6.8″ x 8.5″) is packed with features and performance to deliver power and bass on demand with 500 Watts of RMS power.
- Class D technology makes this amp extremely efficient by reducing demand on the vehicles electrical system (RMS Power: 300 Watts x 1 @ 4Ω OR 500 Watts x 1 @ 2Ω).
- Featuring C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. Supply that generates more power as voltage increases, and integrated Punch EQ that corrects for acoustic deficiencies while delivering up to 3X the bass.
- Designed for subwoofers, a variable infrasonic filter and remote level control allows you to tune the bass for the desired level for the music.
- Famous Rockford Fosgate build quality with a full 1-year warranty when purchased from an authorized Rockford Fosgate reseller.
Check StockRockford Fosgate R2-250X1 Prime 250-Watt Mono Amplifier
- The R2-250X1 full-range class-D mono amplifier (1.9″ x 6.8″ x 8.1″) is packed with features and performance to deliver power and bass on demand with 250 Watts of RMS power.
- Class D technology makes this amp extremely efficient by reducing demand on the vehicles electrical system (RMS Power: 150 Watts x 1 @ 4Ω OR 250 Watts x 1 @ 2Ω).
- Featuring C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. Supply that generates more power as voltage increases, and integrated Punch EQ that corrects for acoustic deficiencies while delivering up to 3X the bass.
- Designed for subwoofers, a variable infrasonic filter and remote level control allows you to tune the bass for the desired level for the music.
- Famous Rockford Fosgate build quality with a full 1-year warranty when purchased from an authorized Rockford Fosgate reseller.
Check StockOSD Wireless 5.8G Subwoofer Transmitter/Receiver Kit Dual Source Diversity Antennas and Brackets Nero WSA
- Instant bass: reliable 5.8 GHz digital wireless subwoofer kit with transmitter and receiver that brings the bass to any space without having to run....
- Zero delay time: Includes upgraded chip set to ensure reliability and an instant transmission with undetectable delay.
- Reliable 5.8 GHz signal: transmits on the less crowded and more reliable 5.8Ghz frequency for steady bass sound up to 150 feet (line of sight).
- Placement flexibility: Use anywhere there is an electrical outlet so you can place your subwoofer where it sounds best.
- Hides easily: transmits through cabinets and walls and the compact footprint lets you hide The transmitter/receiver in another room, behind a sofa or....
Check StockRockford Fosgate R2-1200X1 Prime 1200-Watt Mono Amplifier
- The R2-1200X1 full-range class-D mono amplifier (1.9" x 6.8" x 11.3") is packed with features and performance to deliver power and bass on demand with 1200 Watts of RMS power.
- Class D technology makes this amp extremely efficient by reducing demand on the vehicles electrical system (RMS Power: 400 Watts x 1 @ 4Ω OR 800 Watts x 1 @ 2Ω OR 1200 Watts x 1 @ 1Ω).
- Featuring C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. Supply that generates more power as voltage increases, and integrated Punch EQ that corrects for acoustic deficiencies while delivering up to 3X the bass.
- Designed for subwoofers, a variable infrasonic filter and remote level control allows you to tune the bass for the desired level for the music.
- Famous Rockford Fosgate build quality with a full 1-year warranty when purchased from an authorized Rockford Fosgate reseller.
Check StockOne More Night
- The R2-750X5 full-range class-D 5-channel amplifier (1.9″ x 6.8″ x 11.2″) is packed with features and performance to deliver power and bass on demand with 750 Watts of RMS power.
- Class D technology makes this amp extremely efficient by reducing demand on the vehicles electrical system (RMS Power: 50 Watts x 4 + 200 Watts x 1 @ 4Ω OR 100 Watts x 4 + 350 Watts x 1 @ 2Ω OR 200 Watts x 2 + N/A @ 4Ω Bridged/Mono).
- Featuring C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. Supply that generates more power as voltage increases, and integrated Punch EQ that corrects for acoustic deficiencies while delivering up to 3X the bass.
- Featuring fully adjustable 12 dB/octave high and low pass butterworth crossovers, balanced differential inputs with RCA pass through outputs, high level input capable, defeat able auto turn on circuit and top mounted controls.
- Famous Rockford Fosgate build quality with a full 1-year warranty when purchased from an authorized Rockford Fosgate reseller.
Check StockBetter Call Saul: Season 1, 2 & 3 [DVD]
- The R2-750X5 full-range class-D 5-channel amplifier (1.9″ x 6.8″ x 11.2″) is packed with features and performance to deliver power and bass on demand with 750 Watts of RMS power.
- Class D technology makes this amp extremely efficient by reducing demand on the vehicles electrical system (RMS Power: 50 Watts x 4 + 200 Watts x 1 @ 4Ω OR 100 Watts x 4 + 350 Watts x 1 @ 2Ω OR 200 Watts x 2 + N/A @ 4Ω Bridged/Mono).
- Featuring C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. Supply that generates more power as voltage increases, and integrated Punch EQ that corrects for acoustic deficiencies while delivering up to 3X the bass.
- Featuring fully adjustable 12 dB/octave high and low pass butterworth crossovers, balanced differential inputs with RCA pass through outputs, high level input capable, defeat able auto turn on circuit and top mounted controls.
- Famous Rockford Fosgate build quality with a full 1-year warranty when purchased from an authorized Rockford Fosgate reseller.
Check Stock