Categories

Best Electrical Conduit Pipes

Patrick Seeker Presents Intros & FX Presentations DJ Tools

  • This Digital Angle Gauge and Level can measure or set angles, check relative angles with zero calibration feature, or can be used as a digital level.
  • High visibility reverse contrast display improves visibility in dimly lit work environments.
  • Strong magnetic base to attaches to conduit, pipes, saw blades, vents, ducts, and other ferromagnetic surfaces.
  • V-groove edges enable optimal alignment on conduits and pipes for bending and alignment.
  • 0 to 90-Degree and 0 to 180-Degree measurement ranges provide easy use in applications such as woodworking, bending conduit, installing electrical panels, and working on machinery.
Check Stock

4 Pack | 6\ Pre-Cut PVC Rooftop Support | Pipe Support | 100% Recycled PVC

  • Popular Rooftop Sleeper Support Already Pre-Cut to 6" (152.4 mm) Length | Cost Effective Rooftop Pipe Support Solution.
  • Support Water Lines, Gas Pipes, Electrical Conduit, Plumbing Pipes, Condensate Lines, Refrigeration Pipes.
  • Affix Pipes to Support Block with Pipe Guides, Clamps, Tab Tape, or Other Hardware (not included).
  • Made of 100% Recycled PVC | Made in the USA | Versatile | Durable | Affordable.
Check Stock

8 Pack | 6\ Pre-Cut PVC Rooftop Support | Pipe Support | 100% Recycled PVC

  • Popular Rooftop Sleeper Support Already Pre-Cut to 6" (152.4 mm) Length | Cost Effective Rooftop Pipe Support Solution.
  • Support Water Lines, Gas Pipes, Electrical Conduit, Plumbing Pipes, Condensate Lines, Refrigeration Pipes.
  • Affix Pipes to Support Block with Pipe Guides, Clamps, Tab Tape, or Other Hardware (not included).
  • Made of 100% Recycled PVC | Made in the USA | Versatile | Durable | Affordable.
Check Stock

PVC Rooftop Support | Pipe Support | Can Be Cut to Desired Length | 100% Recycled PVC

  • Can Be Cut to Desired Lengths | Suggested minimum length is 6" (152.4 mm) to provide adequate stability..
  • Support Water Lines, Gas Pipes, Electrical Conduit, Plumbing Pipes, Condensate Lines, Refrigeration Pipes.
  • Affix Pipes to Support Block with Pipe Guides, Clamps, Tab Tape, or Other Hardware (not included).
  • Made of 100% Recycled PVC | Made in the USA | Versatile | Durable | Affordable.
Check Stock

The Country Living Handbook: A Back-to-Basics Guide to Living Off the Land (Handbook Series)

  • This Digital Angle Gauge and Level can measure or set angles, check relative angles with zero calibration feature, or can be used as a digital level.
  • High visibility reverse contrast display improves visibility in dimly lit work environments.
  • Strong magnetic base to attaches to conduit, pipes, saw blades, vents, ducts, and other ferromagnetic surfaces.
  • V-groove edges enable optimal alignment on conduits and pipes for bending and alignment.
  • 0 to 90-Degree and 0 to 180-Degree measurement ranges provide easy use in applications such as woodworking, bending conduit, installing electrical panels, and working on machinery.
Check Stock

9 Pack | PVC Rooftop Support | Pipe Support | Can Be Cut to Desired Length | 100% Recycled PVC

  • Can Be Cut to Desired Lengths | Suggested minimum length is 6" (152.4 mm) to provide adequate stability..
  • Support Water Lines, Gas Pipes, Electrical Conduit, Plumbing Pipes, Condensate Lines, Refrigeration Pipes.
  • Affix Pipes to Support Block with Pipe Guides, Clamps, Tab Tape, or Other Hardware (not included).
  • Made of 100% Recycled PVC | Made in the USA | Versatile | Durable | Affordable.
Check Stock

IDEAL Electrical 74-028 Ductile Iron Bender – Conduit Metal Pipe Bender w/handle for 1 in. EMT Pipes, Benders

  • Conduit Bender: ideally used to bend iron and metal pipes, the iron conduit bender offers application in electrical repairs and installation to fit pipes around all ceiling, corners, wall, and irregularly shaped passages.
  • Precision Bending: the metal pipe bender is equipped with markings that represent star, arrow, degree scale, and rim notch to get perfect bends. The markings are raised and cast into both sides to aid visibility of the users.
  • Durable Construction: made with ductile iron, the rugged construction of iron bender head offers durability to withstand long-term heavy-duty use. Baked-on blue enamel finish of the handle resists corrosion and other abrasive factors.
  • Convenient Usage: the grooved internal hook surface of the ductile pipe bender prevents slippage while applying extra force in use to avoid accidents. The heat-treated sturdy stress points allow the users to get accurate bends with ease.
  • Product Specifications: The Ductile EMT bender is suitable to bend 1 in. EMT metal pipes as well as 3/4 in. Rigid & 3/4 in. IMC pipes. It uses industrial standard Benfield b....
Check Stock

Morris Products 60272 Tape Roll, 2” X 100ft X 20 Mil, Black

  • HEAVY GAUGE VINYL PIPE WRAP TAPE: Find a durable solution to protect against corrosion in electrical and mechanical piping systems with this self-fusing and self-amalgamating Morris Products Black Pipe Wrap Tape available in 10 mil and 20 mil..
  • PRESSURE SENSITIVE PIPE WRAP TAPE: Offer electrical and mechanical protection for all types of valves, joints, pipes and conduit with this pressure-sensitive pipe wrap tape that is UV..
  • VERSATILE APPLICATIONS: You need durable products when working with indoor and outdoor overhead and direct burial applications and that’s what you get with this lead-free, UPC approved black pipe wrap tape..
  • ULTIMATE STRENGTH: This black pipe wrap vinyl tape offers excellent protection against corrosive salts and sewage, sunlight water and acids for ultimate protection of conduits, joints, valves and pipes..
  • COLLECTION OF COMPREHENSIVE ELECTRICAL TOOLS: Morris Products is proud to feature a variety of electrical tools and applications that range from wire connectors and non-insulated ferrule to nylon cable ties and cable splicers..
Check Stock

IDEAL Electrical 74-034 Ductile Iron Bender – Conduit Metal Pipe Bender w/handle for 1.25 in. EMT Pipes. Cutters and Benders

  • Conduit Bender: ideally used to bend iron and metal pipes, the iron conduit bender offers application in electrical repairs and installation to fit pipes around all ceiling, corners, wall, and irregularly shaped passages.
  • Precision Bending: the metal pipe bender is equipped with markings that represent star, arrow, degree scale, and rim notch to get perfect bends. The markings are raised and cast into both sides to aid visibility of the users.
  • Durable Construction: made with ductile iron, the rugged construction of iron bender head offers durability to withstand long-term heavy-duty use. Baked-on blue enamel finish of the handle resists corrosion and other abrasive factors.
  • Convenient Usage: the grooved internal hook surface of the ductile pipe bender prevents slippage while applying extra force in use to avoid accidents. The heat-treated sturdy stress points allow the users to get accurate bends with ease.
  • Product Specifications: The Ductile EMT bender is suitable to bend 1-1/4 in. EMT metal pipes as well as 1 in. Rigid & 1 in. IMC pipes. It uses industrial standard Benfield b....
Check Stock

Klein Tools 935DAG Digital Electronic Level and Angle Gauge, Measures 0 - 90 and 0 - 180 Degree Ranges, Measures and Sets Angles

  • This Digital Angle Gauge and Level can measure or set angles, check relative angles with zero calibration feature, or can be used as a digital level.
  • High visibility reverse contrast display improves visibility in dimly lit work environments.
  • Strong magnetic base to attaches to conduit, pipes, saw blades, vents, ducts, and other ferromagnetic surfaces.
  • V-groove edges enable optimal alignment on conduits and pipes for bending and alignment.
  • 0 to 90-Degree and 0 to 180-Degree measurement ranges provide easy use in applications such as woodworking, bending conduit, installing electrical panels, and working on machinery.
  • 0 to 180-Degree range is useful when accounting for kickback in pipe bending applications when bending to 90-Degree or more.
  • Display auto-rotates when upside-down for easy viewing.
Check Stock

(Pack of 50) AP-10451, 3/4 Inch Two Hole Snap On Pipe Strap for EMT Conduit Installation, Reinforced Rib for Extra Strength, Galvanized Zinc Plated Metal, Tension Clamp for Easy Snap-On

  • QUALITY AND DURABILITY – These 3/4 inch Snap-On conduit straps are crafted from galvanized steel with a zinc coating that forms a protective layer. With its reinforced rib, this EMT two-hole pipe strap provides extra strength and durability..
  • EASY INSTALLATION – These two-hole design snap on conduit straps are extremely simple to use. Simply snap the strap onto your conduit and use screws to secure it onto any surface. They are perfect for both indoor and outdoor applications..
  • ACCURATE SIZES – Our Snap-On conduit straps are available in many sizes to fit different pipes, cables, hoses, and tubes. Choose from a selection of  2 inch, 1-1/2 inch, 1-1/4 inch, 1 inch, 3/4 inch, or 1/2 inch sizes..
  • VERSATILE – These snap-on straps can be used for a wide variety of tubes or pipes that range anywhere between EMT conduits to non-insulated ferrule..
  • ABOUT US - Airmont Products manufactures a fine line of top-quality electrical supplies. Our EMT snap-on pipe straps are especially recognized as being durable, versatile, and easy to install. Customer satisfaction is our priority. Let us know how you liked this product!.
Check Stock

Klein Tools 80035 Level, Digital Electronic Level and Angle Gauge Tool Kit with Plumbers Straps, Measures Angles, Magnetic Base, 2-Piece

  • MEASURE OR SET ANGLES, check relative angles, or can be used as a digital level.
  • REVERSE CONTRAST DISPLAY improves visibility.
  • MAGNETIC BASE attaches to conduit, pipes, saw blades and other ferromagnetic surfaces.
  • V-GROOVE EDGES enable optimal alignment on conduit and pipes.
  • DIGITAL LEVEL MEASURES 0-90 Degree or 0-180 Degree ranges.
  • PLUMBER'S KIT straps to non-magnetic pipes and conduit to present a magnetic surface.
  • FLEXIBLE, ADJUSTABLE LENGTH STRAPS connect the metal plate to pipes, conduit, or other objects.
Check Stock

8 Pack | Rooftop Support | Saddle Pipe Support | Rooftop Block Stand with Pipe Cradle and Sleeper Curb | UV Resistant | Made of 100% Recycled Plastic | Heavy and Extremely Durable

  • Patented Design | Prevents Damage to Roof Membrane | Rounded Safety Edges | Heavy and Extremely Durable | No Accessories Needed.
  • Support Gas Pipes, Electrical Conduit, Plumbing Pipes, Refrigeration Pipes.
  • Unique Design Absorbs Thermal Expansion and Contraction.
  • Made of 100% Recycled Plastic | UV Resistant | Made in the USA | Versatile | Durable | Affordable.
Check Stock