HydroMist Oscillating Wall Mounted Outdoor-Rated Fan, 3-Speed Control on Fan Motor, Hard Resin Fan Blade, Mounting Bracket and Black Cover Included, 18”, Black

  • ...pushing the fan head up or pulling it down. As the fan clicks vertically, it will lock in position.
  • Outdoor-Rated: Fan head comes assembled w/ sealed motor to protect from rain. Electrolysis nickel plating and weather-resistant finish prevent unsightly weathering. Built-in electrical fuse-in plug protects motor from power surges (2 extra fuses included).
Check Stock

GRELWT 20

  • ????POWERFUL AND EFFICIENT: Small but mighty, you’ll enjoy the power and efficiency of GRELWT’s Shutter Exhaust Fan. The 20-inch runs on standard 120 volts at 1/4 HP, 2.59 amps with 1400 rotations per minute, cooling and ventilating an area of 3877 cubic feet per minute!.
  • ????EXHAUST FAN WARRANTY: The housing is made of galvanized steel which prevents rust. This heavy duty exhaust fan has 1 year limited warranty. The shutters open and close automatically. Fans do not come with electrical plugs. Requires wiring to your building’s electrical system..
  • ????MULTIPURPOSE: Perfect cooling and ventilation solution for any space at your home – including the greenhouse , attic, garage, and more. the fully enclosed motor is thermally protected and permanently lubricated for easy maintenance..
  • ????CUT COOLING COSTS: Reduce expensive cooling bills at home. Ready to install, our greenhouse exhaust fan is designed to help remove excess heat and moisture keeps your living space cooler and more comfortable year-round..
  • ????WEATHER RESISTANT SHUTTERS: These shutters are made of durable galvanized steel, which prevents the formation of rust,thereby adding the life of the fan..
Check Stock

Lg 3550W1A090A Microwave Convection Fan Motor Cover, Rear Genuine Original Equipment Manufacturer (OEM) Part

  • This part is compatible with models including.
  • 72167909601,72167909600,LMH1517CVST,72167902600,72167903601,72167902601,72167903600,LMH1517CV.
  • Convection fan motor cover 3550W1A090A protects the convection fan motor.
  • Genuine Original Equipment Manufacturer (OEM) part. Compatible Brands: Kenmore Elite,Lg.
  • This convection fan motor cover (part number 3550W1A090A) is for microwaves.
  • Because high-voltage capacitors in a microwave can retain a lethal electrical charge even when the microwave is unplugged, a service technician should install this part.
Check Stock

WR60x23584 Evaporator Fan Motor by AMI PARTS - WR60x23584 GE Refrigerator Evap Fan Motor Replaces WR60x10141 WR60x10346 PS10063450 WR60x10045 WR60x10046

  • The GE Appliances WR60x10277 Evaporator Fan Motor is a genuine OEM (Original Equipment Manufacturer) part designed and engineered to exact....
  • Replacement GE Appliances Refrigerator Evaporator Fan Motor circulates air through the fresh food compartment for efficient cooling.
  • GE Appliances WR60x10277 Refrigerator Evaporator Fan Motor has electrical specifications of 9.75V DC and 3.25W.
  • High quality GE Appliances OEM WR60x10277 Refrigerator Evaporator Fan Motor is manufactured with premium materials for durability and exact fit, be....
  • Repair your appliance with confidence when you choose Genuine GE Appliances Parts & Accessories.
Check Stock

AC Rear Blower Motor Transistor Resistor For Honda Pilot 2003-2008 Acura MDX 2001-2006 Part# 79330-S3V-A51 79330S3VA51

  • Blower Motor Resistor is an electrical component that is a part of the vehicle's heating and air conditioning system. It is responsible for controlling the blower motor’s fan speed. When fan speed is changed via the knob on the instrument cluster, the blower motor resistor changes setting, which changes the speed of the blower motor..
  • This blower motor fits for For 2001 - 2006 Acura MDX 3.5L V6 For 2003 - 2008 Honda Pilot 3.5L V6..
  • OEM Replacement Number: 79330-S3V-A51, 79330S3VA51, RU364, RU-364, 4P1493 JA1626, 79330-S2K-941. Please check your OE number before you order it..
  • As the fan speed is one of the most frequently adjusted settings of the air conditioning system, the blower motor resistor is put under constant stress, which can cause it to eventually fail. A failed blower motor resistor can cause issues with the operation of the entire heating and air conditioning system..
  • The HVAC blower motor resistor or BMR for short, controls the speed of vehicle's blower motor. A malfunctioning blower motor resistor will cause a poor cabin cooling or heating condition. It can also cause poor windshield defrosting or de-icing, reducing driver visibility. This blower motor resistor is in the panel under the shift lever beside the driver's side. Easily instal....
Check Stock

Smart Vac SMP400 Central Vacuum System Power Unit

  • ...ration. The entire unit is baked epoxy Powder Coat finish inside and out . 5-Year Manufacturer's Motor Warranty..
  • ✅ Thru-flow Blower Motors are not suitable for Central Vacuum Application due to lack of reliability, absence of Cooling Fan, the motor section is not separated from vacuumed (dusty and dirty) air, all electrical parts are also exposed to this “dirty” air and for lack of serviceability. Carbon Brushes are either not easy or possible to replace. They also tend to turn at much higher RPM significantly shortening service life. Thru-flow motors are predominantly used for portable vacuums and have much smaller carbon brushes and hence shorter life..
Check Stock

INEEDUP 16192099 Heating and Air Conditioning Heater Blower Motor Control Switch Fit for 2002 Chevrolet Avalanche 1500/2002 Chevrolet Avalanche 2500/1995-1999 Chevrolet C1500 /1995-2001 GMC C3500HD

  • ...2002 Chevrolet C3500 /1995-1999 Chevrolet K1500 /1999 Chevrolet K1500 Suburban /1995-1999 Chevrolet K2500 /1999 Chevrolet K2500 Suburban /1995-2000 Chevrolet K3500 /1999 Chevrolet Tahoe /1995-1999 GMC C1500 /1999 GMC C1500 Suburban /1995-2000 GMC C2500.
  • ADVANTAGE – The Heater Blower Motor Control Switch is an electrical component that is a part of the vehicle’s heating and air conditioning system. It is responsible for controlling the blower motor’s fan speed. When fan speed is changed via the knob on the instrument cluster, the Heater Blower Motor Control Switch changes setting, which changes the speed of the blower motor.
  • DETERMINE THE SPEED OF THE BLOWER – The change in resistance then limits The current through the motor, which dictates the speed at which the blower fan works. Heater Blower Motor Control Switch, being a mechanical component, are prone to wear and are the most common point of failure in a car’s heating system. Resistors, their construction and troubleshooting.
  • SIMPLE OPERATION – On most vehicles, the highest blower motor speed setting bypasses the Heater Blower Motor Control Switch to give the fan full vehicle voltage (typically between 12 and 14.4 volts). If the blower motor still works on high, bu....
Check Stock

Diamond Central Vacuum Accessory Kit w/Sebo ET-1 (Pigtail, 35')

  • ...ration. The entire unit is baked epoxy Powder Coat finish inside and out . 5-Year Manufacturer's Motor Warranty..
  • ✅ Thru-flow Blower Motors are not suitable for Central Vacuum Application due to lack of reliability, absence of Cooling Fan, the motor section is not separated from vacuumed (dusty and dirty) air, all electrical parts are also exposed to this “dirty” air and for lack of serviceability. Carbon Brushes are either not easy or possible to replace. They also tend to turn at much higher RPM significantly shortening service life. Thru-flow motors are predominantly used for portable vacuums and have much smaller carbon brushes and hence shorter life..
Check Stock

Lasko Oscillating 18-inch EcoQuiet DC Motor 12-Speed Pedestal Fan with Remote Control, Black, S18708

  • ...In Safety】This pedestal fan is ETL listed and comes with a 6.5-foot power cord.
  • it's equipped with the Lasko trusted safety fuse technology.
  • THE BLUE Plug is an important safety feature on all Lasko residential fans.
  • the plug is designed to cut off electric current to the fan if it detects a potentially hazardous electrical fault in the fan’s motor or power supply.
Check Stock

TPI 8749202 CACU30WO Oscillating Commercial Wall Fan, 30'

  • ...racket and features a 30-inch diameter 3-aluminum paddle blades attached to a steel hub and spider assembly for high velocity performance. The 3-speed motor comes with 1/4 horsepower, permanently lubricated, ball bearing, open ventilated motor with permanent split capacitor generating 2.4-amps at 120V, single phase electrical service.
  • Durable Circulation Fan: This 30 inch compact oscillating fan delivers high air flow and provides easy DIY installation. This light-weight fan comes unassembled in convenient packaging, but is easy to assemble. The hassle-free electric fan can be operated in a gym, basement, restaurant, workshop, protected patio area, work shop, classroom or garage..
  • Air Circulating Appliance: Maintains steady air flow and eradicates suffocation in enclosed spaces easily. Unit can be temporarily used in semi-protected outdoor areas such as terrace shades and patios..
  • Care Tip: OSHA approved grills have retainer clips to gain easy access to the blade and grills for easy cleaning..
Check Stock

8E5Z19E624A AC Blower Motor Resistor Regulator Heater For Ford Fusion 2002-2015 Lincoln MKZ 2007-2012 Zephyr 2006-2006 Mercury Milan 2006-20118 Replace# E5Z-19E624-A

  • The blower motor resistor is an electrical component that is a part of the vehicle's heating and air conditioning system. It is responsible for controlling the blower motor’s fan speed. When fan speed is changed via the knob on the instrument cluster, the blower motor resistor changes setting, which changes the speed of the blower motor..
  • This Blower Motor Resistor fits for 2006 - 2012 F'ord Fusion 2.3L&2.5L&3.0L HVAC Blower Motor Resistor, 2007-2012 Lincoln MKZ 2.5L&3.5L HVAC Blower Motor Resistor, 2006 Lincoln Zephyr 3.0L HVAC Blower Motor Resistor, 2006-2011 Mercury Milan 2.3L&2.5L&3.0L HVAC Blower Motor Resistor..
  • Replaces Part Numbers: 8E5Z19E624A, 4P1589, YH125. Please check your OEM part number before you order it..
  • As the fan speed is one of the most frequently adjusted settings of the air conditioning system, the blower motor resistor is put under constant stress, which can cause it to eventually fail. A failed blower motor resistor can cause issues with the operation of the entire heating and air conditioning system. The AC Blower Motor Resistor is located on lower passenger side dash and is easily accessible by removing a few screws..
  • A bad or failing blower motor resistor will produce a few symptoms: Blower motor stuck on one speed.
Check Stock

6PCS Synchronous Synchron Motor Turntable Motor 50/60Hz AC100~127V CCW/CW 4W with 7mm Flexible Coupling Connector And 6ft Power Cord Switch Plug For Cup Turner,Cuptisserie,or Guide Motor (2.5-3RPM)

  • ...witch plug cord made up of PVC Plastic, and the Internal is Copper Core.
  • 6 Quick Connector Terminal The shell is made of high quality PVC insulation fireproof material, safe, non-toxic and corrosion resistant.it is easy to operate, saving time and effort.The surface has obvious markings.These can be used for motors, electrical controls, power supplies, household appliances, lighting, machinery and other electrical connections..
  • Wide uses: Widely Used for cup turner,cuptisserie, Tumbler cup rotator, heater machine, christmas tree, Dynamic Visualizer ,Arts & Crafts lighting rod dryer, massagers, drying the epoxy, popcorn machine, power watch winder, Air conditioner,electric fan etc.hand-made, school project, model such as heater machine, air conditioner, electric fan, Christmas tree, dynamic visualizer, popcorn machine, arts and crafts lighting, etc.
Check Stock

Hydromist Oscillating Wall Mounted Outdoor-Rated Fan 3-Speed Cord Control Hard Resin Fan Blade with Mounting Bracket and Black Cover 18” Metallic Silver

  • Oscillation: The fan is ideal for indoor/outdoor use. Oscillation covers 30 degrees right/left from center or put into a fixed position. If mounted in corner, it can be pivoted and secured on the bracket to change the swing span more to the left or right.
  • Corded 3-Speed Control: Mountable Control Power Box on Fan Cord. Cord length from fan to speed controller: 64”, from speed controller to plug: 96”. Total power cord length is 160”. The fan comes fully assembled. Suggested fan install height: 8-10’.
  • Very Quiet Running: Quieter than most outdoor fans. The fan shroud creates a white noise which is more soothing than annoying. Db Sound Level Speed 1: 62 Db, Speed 2: 64 Db, Speed 3: 70 Db.
  • Easy Tilt Ratchet System: Adjust tilt tool-free by simply pushing the fan head up or pulling it down. As the fan clicks vertically, it will lock in position.
  • Outdoor-Rated: Fan head comes assembled w/ sealed motor to protect from rain. Electrolysis nickel plating and weather-resistant finish prevent unsightly weathering. Built-in electrical fuse-in plug protects motor from power surges (2 extra fuses included).
Check Stock