Categories

Best Electrical Isolation

5pcs Enameled Copper Wire Magnet Winding Wire 0.1mm Thickness 12m Length for Connecting or Soldering Purpose Natural

  • Copper Materia: Made of high electrical conductivity copper.
  • Applications: Used in professional maintenance of mobile phones, computers, laptops and other preciseness motherboard.
  • Ideal Replacement for Wire Cable: A copper wire to take place of wire cable.
  • Easy to Weld: Directly welding without scraping isolation layer.
  • Long Length: Total 12 meters long, enough for home or shop use.
Check Stock

CR Magnetics CR2550-A Low Cost Remote Current Indicator with Amber LED, 1.5 AAC Turn-On Point

  • Low cost for high volume OEM installations.
  • Electrical isolation between circuits, output relay rated up to 20 Amps.
  • LED trip status indicator, dead band prevents relay chatter.
  • Calibrated dial option available, external current transformers available.
  • Applications: monitor electrical heater elements, sense motor over/under loads, detect lamp burn-out, indicate phase loss.
  • Variable trip point and time delay, monitors currents from 10 mA to 60 AC amps.
Check Stock

CR Magnetics CR4395-EH-120-110-X-CD-ELR-I Current Sensing Relay with Internal Transformer, 120 VAC, Energized on High Trip, 1 - 10 AAC Trip Range

  • Current sensing relay for monitoring electrical current.
  • Current carrying wire is routed through an aperture.
  • Electrical isolation between circuits (SPDT).
  • Variable trip point range with adjustable timer for stability.
  • UL recognized for safety and RoHS compliant for hazardous substances.
Check Stock

LoveRPi Compact PoE HAT with PWM Fan Controller for Raspberry Pi 4

  • COMPACT RASPBERRY PI 4 POE HAT: Ideal for non-grounded installation, this NON-ISOLATED PoE HAT features optimized footprint. Must be used with a standards compliant IEEE 802.3af PoE or 802.3at PoE+ switch that complies with Section 33.4.1 for power sourcing equipment (PSE) electrical isolation. "Passive PoE" (DC 24V or 48V) is not standards compliant and may cause damage to equipment if connected improperly. Some Ubiquiti switches are not properly isolated and require isolated PoE HATs..
  • GROUND LOOPS WARNING: Do not use this device with grounded USB peripherals, HDMI displays, and attachments. Please use the professional PoE model with isolation transformer to prevent electrical loops. In non-controlled PoE applications, ALWAYS use the professional PoE model..
  • INTEGRATED PWM FAN CONTROLLER: Based on the EMC2301 SMBus compliant fan controller, this PoE HAT is fully programmable over I2C to control standard 4-pin PWM fans. Set user-space or device-tree based temperature or event triggers for complete fan control from off to maximum RPM. Fan speed tach also provides stall detection, spin-up control, and ramp rate control with 1% accuracy from 500-16K RPM..
  • VENTILATED CASE WITH FAN HIGHLY RECOMMENDED: Do not use this product in an enclosed case without acti....
Check Stock

Huco 333.31.3.Z Size 31 L-Box Miniature Right Angle Gearbox, Acetal Case with Acetal Gears, Inch, 1.2\ OD, 1.2\ Length

  • Hardened steel shafts for strength and durability.
  • Sintered bronze bearing system for durability and resistance to corrosion.
  • Acetal gears molded to steel shafts are lightweight and durable for low-friction performance.
  • Electrical isolation between shafts and Acetal housing to prevent electrical arcing and circuit shortages.
  • Two counterbored clearance holes on case for conventional chassis mounting.
Check Stock

GCAN-207 RS232/485 to CAN Converter,Realize bidirectional Communication Between RS232 or RS485 Bus and CAN Bus

  • Standard serial port level, RS232 model or RS485 model can switch by software.
  • Conversion direction can be set to: CAN?? Serial, CAN?Serial, CAN?Serial.
  • Serial Bus baud rate range from 600bps to 115200bps.
  • CAN-Bus supports CAN2.0A and CAN2.0B frame format, conform to ISO/DIS 11898 standards.
  • CAN-Bus baud rates range from 5Kbps to 1Mbps.
  • CAN-Bus interface with electrical isolation.
  • CAN-Bus isolation converter insulation voltage: DC 1500V.
  • Working temperature range from -40 to 85 °C.
Check Stock

UCTRONICS PoE hat for Raspberry pi

  • For Pi 4 and 3 B+: This PoE HAT can be used to deliver clean and reliable power to the raspberry pi 3 model B+ and raspberry pi 4 model B (not included)..
  • Intelligent Temperature Control: the 25mm×25mm brushless cooling fan will turn automatically when the temperature of the processor is high..
  • Smaller Size: Save more space than the official HAT, can be held in the most case for Raspberry Pi.We recently released a new version of PoE HAT with fan, which can support 48V non-standard switches, please search B09MCGFX12.
  • NOTE: The network switch or power sourcing equipment (PSE) is needed to supply the PoE signal, and they must be compliant with the IEEE 802.3af or 802.3at PoE standard, particularly section 33.4.1 with regards to PSE electrical isolation of the leads. For the non-isolated switch, such as some Ubiquiti switches can not provide proper isolation, they can only work with CAT 5E and CAT 6E network cable..
Check Stock

iKKEGOL Mini 2-Port RJ45 Network Key-Press Switch Splitter Selector Box 100M 2-in 1-Out or 1-in 2-Out

  • No extend Power, no electrical circuit between inter net and outer net, physical isolation and no electrical interference.
  • Interface: RJ45 100MHz 2 In 1 Out or 1 In 2 Out.
  • Switch freely between intranet and external network signal.
  • Simple and convenient installation, button switch . Long life, switch more than 100,000 times.
  • Mini plastic box: 7.9cm x 5cm x 2.1cm - 3.1inch x 1.96inch x 0.83inch.Net Weight : 48g.
Check Stock

Ernie Ball Volt Pedal Power Supply P06191

  • Connect multiple digital and analog pedals with complete electrical isolation.
  • Ultra-compact housing with LED indicators for each input/output.
  • Universal AC-adapter and DC Power cables included.
Check Stock

Sennheiser Professional E 935 Dynamic Cardioid Vocal Microphone Wired Wireless

  • Cardioid pickup pattern: Provides good signal isolation and feedback rejection, enabling higher sound levels to be obtained.
  • Shock-mounted capsule: Low sensitivity to impact and handling noise.
  • Hum compensating coil: Reduces electrical interference.
  • Neodymium ferrous magnet with boron: Keeps microphone stable regardless of climate.
  • 100% metal casing: Rugged and reliable for tough on-stage use.
Check Stock

Lotus Analin Electric Countertop Deep Fryer 5000W Dual Tank Commercial Restaurant Steel

  • Heavy Duty Stainless Steel for Commercial and Home Applications.
  • Stainless Steel construction for electric 2-tank frye.
  • Electrical safety isolation switch: ABS control Dial.
  • DOUBLE tank Comes with 2 FREE stainless steel fryer baskets wand plastic handles for preventing scald.
  • Residue Plates for filtering out the dregs.
Check Stock

CR Magnetics CR6221-500-50 AC Power Transducer with Single Phase Reactive Power, 20 - 5 KHz, 0 - 300 Load, 12 VDC, 0-500 VAC 0-50 AAC Input Range, 4 - 20 mADC Output Range

  • 4 - 20 mAdc outputs, connection diagram printed on case.
  • Electrical isolation between circuits, output relay rated up to 20 Amps.
  • LED trip status indicator, dead band prevents relay chatter.
  • Calibrated dial option available, external current transformers available.
  • Applications: monitor electrical heater elements, sense motor over/under loads, detect lamp burn-out, indicate phase loss.
  • Variable trip point and time delay, monitors currents from 10 mA to 60 AC amps.
Check Stock

Pangea Audio AC 9 MKII Power Cable - 1.5 Meter

  • Designed specifically to deliver the high-current power needed by audio components.
  • No-compromise Cardas Grade One Copper and 99.99% purity OFC conductors for maximum conductivity.
  • DeathGrip IEC with massive gold-plated contacts which provide solid, secure grip on component's IEC.
  • Double-shielded for optimized high-current noise isolation.
  • 24k gold-plated contacts for superior electrical contact.
Check Stock