Categories

Best Electrical Panel Saw

Makita EK7301X1 14' 73 cc Power Cutter with Diamond Blade

  • Improved decompression valve and metering spring for precise fuel regulation at start up..
  • Ignition coil with start-support function stores electrical energy with each pull for easier start ups.
  • On-Off-Choke operation switch on a single lever for operator convenience.
  • Five stage filtration system with advanced directional air flow, provides cleaner air for better saw performance.
  • Starter grip decompression valve for faster starting.
  • Carburetor engineered with improved deco-valve and metering spring for precise fuel regulation at start up.
  • Reinforced aluminum blade guard with 70 Degrees range of limitless positioning using a marked knob handle.
  • Cutting arm position simply changes from center position to flush outboard position allowing cuts directly adjacent to work.
  • New ignition coil with start-support function stores electrical energy with each pull for easier start ups.
  • Water kit is assembled to saw and can be used with garden hose, gravity tank or pressure tank.
Check Stock

DARENYI Black ABS Plastic Sheets 1/8 Thick Plastic Board Sheet Flexible Than Plexiglass Sheet Moldable Than Acrylic Sheet Moldable Plastic Sheets for Craft Fender Liner, Home Decor etc(16 x 12'')

  • 【Flexible and Solid】 ABS plastic sheet is good impact resistance, and can be bent within reasonable angles when bearing force, then recover when the force is gone. Compared with plexiglass sheet, ABS sheet is flexibler and stronger.
  • 【Easy Thermoformable and Process】-- Black abs sheet is easy to thermoform, just heat it to 93℃ (around 200℉) then make it bow to the angles you want, and hold the shape until it cools down. Can be cut easily with table saw, jigsaw, water-jet at room temperature..
  • 【Size】-- black plastic sheet is 16 x 12 x 0.12inches/40 x 30cm x 3mm, great for various craft DIY..
  • 【Multipurpose Use】-- Abs plastic panel can be applied for car, home decor, building model, electronic device, robotics competition. Great for making switch panel, drawer divider, waterproof application, etc..
  • 【Features】- Very good impact strength, stability, dyeability, easy to thermoform and proces. High mechanical strength, low water absorption, good corrosion resistance, harmless and odorless, with excellent chemical properties and Electrical insulation performance..
Check Stock

Medical Electric Plaster Saw Cast Cutter Orthopedic Sports Medicine 110V 12500r/min FDA Approval）

  • ...tor may have issues in the long run due to dust).
  • ✄ PRODUCTS CLASSIFICATION -- 1.Anti-shock type,degree and protection against harmful into the liquid level points:medical saw is II type.B is common tyoe. 2.Divided by the work of system: medical electric plaster saw is running short..
  • ✄ SAFE & RELIANLE -- The electrically operated gypsum saws through the saw blade swinging sawing gypsum,in use,even if the saw blade will contact the patient skin not to create cuts.the electrical machinery uses the double insulation protective device,has guaranteed the safety of operators and patient..
  • ✄ HIGH QUALITY -- This plaster saw has FDA approval, uses micro imported motor with low noise, small vibration, more powerful and reliable with faster speed, did not overheat. Alloy blade is suitable for long time use. It comes with a foam padded travel case, and it is sturdy and well made..
  • ✄ SPEED ADJUSTABLE -- Speed adjust from large to small, in the actual test 1-5 gear, The closer it is to the skin, the slower it should be, turn to low gear..
Check Stock

Transparent Table Saw Protective Cover,Professional Plastic Shield Case for 12inch Table Saws Blade Guard &Dividing Cutter

  • ★【Transparent Saw Cover】The transparent saw cover effectively prevents dust from entering the table and can effectively protect the table saw from dust and dirt. with output tools, it is helpful for woodworking..
  • ★【Practical Material】This 12 inch table saw protective cover + dividing knife is made of plastic, durable and light. the utility parts used by workers make the machine more durable..
  • ★【Main Parameter】Maximum Length: 450mm.
  • Working Length: 360mm (Maximum Diameter Of Saw Blade).
  • Working Height Of Dividing Knife (Maximum): 200mm.
  • Outer Diameter Of Dust Collection Interface: 32mm.
  • ★【Wide Application】This 12 inch table saw protective cover + dividing knife is suitable for 12 inch flip saw, electric circular saw, sliding table saw, panel saw, etc. 12-inch table saw..
  • ★【100% Satisfaction Guarantee】We ship directly from the US warehouse about 5-7 business days to delivery. We have a Professional Customer Service Team to Reply You within 24 hours.If you have any questions or concerns, Feel free to contact us!We will provide the best suitable solutions for you..
Check Stock

Hi-Tech Diamond 10" Lapidary Equipment Slab Saw - Rock, Stone, Glass Cutting, Slabbing, Sawing Machine Includes TWO 10" Diamond Saw Blades & Vise Attachment

  • ...w vise accessory to get precise cuts every time! Comes equipped with one 10" notched diamond saw blade, one 10" sintered diamond saw blade, saw vise attachment accessory, a spray shield, an Allen wrench, a waterproof apron, and a complete written and visual instruction manual. Just add water, plug into an electrical outlet and start slabbing today!.
  • ABOUT US: Since 1984, Hi-Tech Diamond has been the premier supplier of quality cutting, grinding, carving and polishing equipment for the lapidary and jewelry industries. Whether you are a beginner, professional, artist or hobbyist, we offer products and equipment that are easy to use for everyone at every experience level. All of our machines are proudly made in Westmont, IL in hopes to help bring back USA manufacturing..
Check Stock

Recessed Light 6-3/8 Inch Carbide Hole Saw Cutter with Extra Gift for 6” Light Cutting Drywall, Ceiling Tile, PLG2SUPT

  • This recessed light Carbide grit hole saw cutter Install kit includes: 1 of 6-3/8" 162mm hole saw bit(Black or Red), 1 of 0.43”(11mm) hex shank arbor, 2 of 3.5"(89mm) pilot HSS drill bits. Extra 8 of 1” CrV Screwdriver bits,1 of Magnetic bit holder, 1 of 3M tape measure..
  • This recessed light carbide grit hole saw bit kit is your ideal choice For 6” recessed light with electric tool, cutting through abrasive materials, Wood, Drywall, Wood & Plaster, Corn Hole Board, Hardie Board, Acoustical Tile, Ceiling Tile . Max cutting depth: 1” (25mm)..
  • The carbide grit hardness over 70HRC.It is more hard, sharp . It’s a longer life in abrasive material..
  • The specially designing edge cuts more clean ,smooth . It is more fast than tradition bi-metal hole saw up to 80%. The specially designing back removes the plug easily. It’s fast than bi-metal hole saw 2 times..
  • Can not cut the wood with nail. Be Careful: Look for Hidden electrical circuits before your drilling..
Check Stock

DEWALT DWE7485WS 8-1/4 in. Compact Jobsite Table Saw With Stand

  • 【No Deformation】Multifunctional mini table saw is designed with 3 mm frame and aluminum alloy panel, and durable materials ensure flatness and precise cutting..
  • 【Adjustable Speed】The motor speed of the table saw is 10000/min, the maximum saw blade is 125mm, the cutting depth can reach 35mm, and the power is strong. Portable table saw is equipped with a power adapter, allowing you to easily adjust the rotation speed to meet different cutting speeds..
  • 【Multi-Angle Cutting Table Saw】This mini table saw for crafts 0-90° free cutting, sliding design, accurate and efficient work, easier and precise cutting, to ensure safety..
  • 【Wide Application】Multifunctional tablesaw features with small size, easy to carry, very suitable for DIY model makers to make any creative artwork anywhere, multifunctional mini table saw, compact and powerful, easy to use.The Electric Bench Saw Cutter can be used to cut decorative templates, aluminum profiles, strong bamboo and other materials (note: hard metals such as iron and steel cannot be cut)..
  • 【Service Guarantee】Fast shipping from Amazon.
  • Satisfied problem solutions response within 24 hours.
  • Assured promise for return,replacement,refund based on quality & shipping problems..
Check Stock

uxcell 2Pcs Red Indicator Light AC/DC 110V, 22mm Panel Mount, for Electrical Control Panel, HVAC, DIY Projects

  • RED LED indicators drove with AC/DC 110 VOLT.
  • Industrial standard 22mm (7/8") mounting diameter.
  • Low behind the panel depth (37mm) and come with a panel locking nut (Fits Panel Thickness: ≤6mm).
  • Screw-clamp connection provides firm contact for reliable operation. Tested over 20,000 hours of using time, they will surely offer a steady performance.
  • Widely used in the ship, machine tools, machine equipment, switch cabinet and power distribution cabinet, electrical control panel such as HVAC Panel and electrical Panel, DIY Projects such as PLC Training Project.
Check Stock

uxcell 3Pcs Red Indicator Light AC/DC 110V, 22mm Panel Mount, for Electrical Control Panel, HVAC, DIY Projects

  • RED LED indicators drove with AC/DC 110 VOLT.
  • Industrial standard 22mm (7/8") mounting diameter.
  • Low behind the panel depth (37mm) and come with a panel locking nut (Fits Panel Thickness: ≤6mm).
  • Screw-clamp connection provides firm contact for reliable operation. Tested over 20,000 hours of using time, they will surely offer a steady performance.
  • Widely used in the ship, machine tools, machine equipment, switch cabinet and power distribution cabinet, electrical control panel such as HVAC Panel and electrical Panel, DIY Projects such as PLC Training Project.
Check Stock

uxcell 4Pcs Yellow Indicator Light AC/DC 110V, 22mm Panel Mount, for Electrical Control Panel, HVAC, DIY Projects

  • YELLOW LED indicators drove with AC/DC 110 VOLT.
  • Industrial standard 22mm (7/8″) mounting diameter.
  • Low behind the panel depth (37mm) and come with a panel locking nut (Fits Panel Thickness: ≤6mm).
  • Screw-clamp connection provides firm contact for reliable operation. Tested over 20,000 hours of using time, they will surely offer a steady performance.
  • Widely used in the ship, machine tools, machine equipment, switch cabinet and power distribution cabinet, electrical control panel such as HVAC Panel and electrical Panel, DIY Projects such as PLC Training Project.
Check Stock

uxcell 10Pcs Red Indicator Light AC/DC 110V, 22mm Panel Mount, for Electrical Control Panel, HVAC, DIY Projects

  • RED LED indicator lights drove with AC/DC 110 VOLT.
  • Industrial standard 22mm (7/8") mounting diameter.
  • Low behind the panel depth (37mm) and come with a panel locking nut (Fits Panel Thickness: ≤6mm).
  • Screw-clamp connection provides firm contact for reliable operation. Tested over 20,000 hours of using time, they will surely offer a steady performance.
  • Widely used in the ship, machine tools, machine equipment, switch cabinet and power distribution cabinet, electrical control panel such as HVAC Panel and electrical Panel, DIY Projects such as PLC Training Project.
Check Stock

VIYUKI Tile Cutter Saw Portable Wet Cutting Porcelain Tile Cutter Table Saw 7-Inch Wet Tile Saw

  • Tile Saw Wet Product Parameter: 120V/60Hz/5A/7" Blade x2, and easy-to-use perfect for any DIY home projects..
  • Wet Tile Saw 7 inch High-quality tool: Adjustable rip fence with miter gauge for accurate straight and miter cuts.
  • Professional Blade water cooling system: Tile saw blade 7-inch wet saw, keeps the blade cool and minimizes dust and debris. The panel of the machine is stainless steel to prevent rust..
  • Professional induction motor - supply generates up to 3,560 RPM..
  • Pack your satisfaction with the quality: Wet tile saw with a manufacturer warranty you can be sure you will get a quality tile saw.we will supply a new one with any flaw on the package or some quality problems..
Check Stock

uxcell 6Pcs Red Green Indicator Light AC/DC 24V, 22mm Panel Mount, for Electrical Control Panel, HVAC, DIY Projects

  • RED + GREEN LED indicator lights drove with AC/DC 24 VOLT.
  • Industrial standard 22mm (7/8") mounting diameter.
  • Low behind the panel depth (37mm) and come with a panel locking nut (Fits Panel Thickness: ≤6mm).
  • Screw-clamp connection provides firm contact for reliable operation. Tested over 20,000 hours of using time, they will surely offer a steady performance.
  • Widely used in the ship, machine tools, machine equipment, switch cabinet and power distribution cabinet, electrical control panel such as HVAC Panel and electrical Panel, DIY Projects such as PLC Training Project.
Check Stock