Categories

Best Electricity Cuts Off

Xyron XRN500EN 5 Inch Create-a-Sticker Machine by Xyron

  • No electricity required. Simply turn the knob and start applying adhesive to items up to 5" wide..
  • Create stickers in a snap. Place the item in the Create-A-Sticker, turn the knob, and then tear and peel sticker. It's that easy!.
  • No heat, electricity, or messy glue required. Apply acid-free, non-toxic adhesive for sleek, professional results..
  • Add adhesive to paper, photos, labels, die cuts, and other embellishments.
Check Stock

EAB Tool 2100007 13' Laminate Floor Cutter with Installation Kit

  • BONUS installation Kit and double-sided honing stone included! Designed to cut laminate, solid wood and engineered flooring up to 15mm (5/8″). will also cut vinyl tile and fiber cement siding such as hardy plank..
  • Designed to cut laminate, vinyl, solid wood and engineered flooring up to 15mm (5/8″). will also cut fiber cement siding such as hardy plank.
  • Angle gauge allows for cuts up to 45 degrees.
  • Quiet, dust free operation, No electricity required.
Check Stock

MANTISTOL 13

  • Design for cutting LVP, WPC, SPC, LVT, VCT, PVC, Vinyl Plank Flooring. Cutting unapproved materials will void warranty..
  • No dust, No noise, No electricity needed, Easy and Professional cutting vinyl floor, Save time. If you received the cutter that cuts less than 8mm thick, please remove the blade, clean the aluminum shavings in the groove, and then assemble the blade correctly in the center of the blade bar..
  • Why does the floor you cut crack? Because your floor must be Rigid Core Vinyl Plank SPC or RVP, it is a stone-plastic composite material, which contains stone powder.
  • it is a brittle material. Floor cracks occur when at least two or more cuts are required to make long cuts and corner cuts..
  • 13" cutting width and 8mm cutting depth. Straight cut, Angle cut.
  • " L & " cut and Lengthwise cut(Solve the installation of wall and corner).Clearly marked measuring guide. 0-45 Angle Cutting, Translational cutting,the deep of the throat is 115mm/4.5inch.Easy to use and to carry around..
  • 2.2mm thick tungsten steel sharp blade, included a 600 Grit oilstone to keep sharp.When the blade becomes dull. Must repair the sharpness of the blade (installed flooring on about 5000 sq.ft ) Otherwise it will quickly end the service lifeman-made damage is not covered by th....
Check Stock

CUTTEREX 13 Professional Laminate Floor Cutter Vinyl Floor Cutter for VCT LVT SPC PVC LVP WPC Rubber Floor and Rigid Core Vinyl Plank with Knee Pads

  • ✅CUTS WIDE RANGE OF FLOORS: Cuts up to 13" or 330mm Width, Up to 5/8" or 15.80mm Thickness on Engineered Wood Floor, VCT, LVT, SPC, PVC, LVP, WPC, Rubber Floor, Vinyl Plank Floor and Rigid Core Vinyl Plank, also Cuts PVC Tile, Vinyl Tile, Fiber-Cement Board Siding, Vinyl Siding, Pressboard Lap Siding, Carpet Tile, Leather, Rubber Base, Rubber Tile, Soft Plastic.
  • ✅OUTSTANDING VALUE: No Dust, No Noise, No Electricity Needed, Easy and Professional Cutting on Vinyl Floor, NO Go Out and In House, NO Go Up and Down Stairs, Time and Labor Saver..
  • ✅SAFE OPERATION: Includes CUTTEREX Knee Pads, Stay Protected, Stay Safe! Dust Free, Quick & Quiet. Long Handle for More Cutting Power Made Operation Easy..
  • ✅CUTS MOST SHAPES ON FLOOR: Straight Cut and Cuts at 0-45° Free Angles.
  • ✅STURDY STEEL AND ALUMINUM CONSTRUCTION: Plus Angle Indications on Support Table, Integrated Straight Cutting Fence..
Check Stock

MARSHALLTOWN Ultra-Lite Flooring Cutter 13 Cuts Vinyl Plank Laminate Engineered Hardwood Siding and More - Honing Stone Included Made in the USA

  • The MARSHALLTOWN Ultra-Lite Flooring Cutter 13" is essential for your next vinyl, laminate, or engineered hardwood flooring installation.
  • Cuts products up to 13" wide, 12 mm thick, and a Janka hardness of 1200.
  • At 14 pounds, this handy shear allows you to cut where you work without dust, noise, or electricity.
  • Unique features include a movable aluminum fence for precise, repeatable 45-degree cuts, 90-degree cuts, and an integrated handle for easy, single hand carry.
  • This product is proudly made in the USA with global materials.
Check Stock

8 Laminate & Vinyl Plank Cutter LV-210 For laminate floor/LVT/VCT/LVP/PVC/SPC/WPC/Vinyl Plank.

  • For Laminate /LVT/VCT/LVP/PVC/SPC/WPC/ Vinyl Plank..
  • Width of Plank Cutting:210, 300 (mm) / 8,12 (inch)..
  • It can also make "L" Cutting, free angle cuts and lengthwise cuts(For Soft vinyl floor)..
  • The cutter has a movable V support, which can be used to keep the board level and cut at the same time..
  • No dust, No noise, No electricity needed, Easy and Professional , Save time，Much safer than a saw blade..
Check Stock

LEONLITE LED Dusk to Dawn Security Lights, Outdoor Flood Light with Photocell, 28W, 3400lm, Exterior Flood lights for Garage, Yard, IP65 Waterproof, ETL Listed, 100-277V, 5000K Daylight

  • ✅ WIDER APPLICATIONS - This lamp is hardwired and it comes with installation instructions. It works with AC100-277V power, making it a more competitive lighting device for a wide range of applications and cuts down on unnecessary power wastage caused by voltage instability.
  • ✅ FEWER ELECTRICITY - This fixture is ETL listed for its premium standards, performance, quality assurance and safe operation. You can also become eligible for state and nation wide rebate programs because of this. You can save up to $1056 in electricity bills throughout its life time.
Check Stock

MantisTol 8.9

  • Design for cutting LVP, WPC, SPC, LVT, VCT, PVC, Vinyl Plank Flooring. You need to know that this can only cut vinyl plank, not laminate floor or wood floor!!!No dust, No noise, No electricity needed, Easy and Professional cutting vinyl floor, Save time..
  • Why does the floor you cut crack? Because your floor must be Rigid Core Vinyl Plank SPC or RVP, it is a stone-plastic composite material, which contains stone powder.
  • it is a brittle material. Floor cracks occur when at least two or more cuts are required to make long cuts and corner cuts..
  • " L & " cut and Lengthwise cut (Solve the installation of wall and corner). Clearly marked measuide. 0-45 Angle Cutting, Cutting max.depth 8mm.Translational cutting,the deep of the throat is 115mm/4.5inch.Easy to use and to carry around, you will like it.
  • 2.2mm thick 9 length tungsten steel sharp blade, included a 600 Grit oilstone to keep sharp.When the blade becomes dull. Must repair the sharpness of the blade (did flooring on about 2000 square feet), Otherwise it will quickly end the service lifethis is a man-made damage and is not covered by the warranty! Or replace blade..
  • Angle Cutting: 0 - 45 inch 160mm wide plank.
Check Stock

LEONLITE LED Dusk to Dawn Security Lights, Outdoor Flood Light with Photocell, 28W, 3400lm, Exterior Flood Lights for Garage, Yard, IP65 Waterproof, ETL Listed, 100-277V, 5000K Daylight, Pack of 2

  • ✅WIDER APPLICATIONS - This lamp is hardwired and it comes with installation instructions. It works with AC100-277V power, making it a more competitive lighting device for a wide range of applications and cuts down on unnecessary power wastage caused by voltage instability.
  • ✅FEWER ELECTRICITY - This fixture is ETL listed for its premium standards, performance, quality assurance and safe operation. You can also become eligible for state and nation wide rebate programs because of this. You can save up to $1056 in electricity bills throughout its life time.
Check Stock

iPettie Pet Hair Dryer 2 Pro with Slicker Brush, Moisturize Dry Hair, 3 Heat Settings, Multifunctional Portable Handheld Pet Dryer, Dog Hair Dryer, Cat Dryer for Medium/Small Pet

  • Multifunctional Grooming Brush - Increases smoothness, decreases frizz & removes static electricity. Keeps hair moist in a friendly way..
  • Mild Auxiliary Pet Hair Dryer - Wanna remove matted hair while drying with one hand? The 2-in-1 design pet brush dryer is your solution. After bathing, we recommend pre-dry your pets with a towel and a blower dryer. Then use iPettie dryer to finish drying and grooming..
  • 304 Stainless Steel Brush - Soft pins on the brush are elastic and durable, which can reach deep into your pet’s undercoat without scratching their skin. What’s more, you can remove the shed hair from the brush within 1 sec, thanks to the one-button hair removal design..
  • 3 Heat Settings – Low/Med/High (100 °F - 140°F / 40 °C - 60 °C) * Note, this dryer uses a lower heat setting than a human hairdryer to protect your pet from getting burned. *.
  • 100% Safety Guarantee - The hairdryer will automatically power off when it's overheating. And your hands won't feel burned as the double-wall design cuts off the heat. A removable filter prevents lint buildup, extending motor life..
Check Stock

ALTOCRAFT 4-1/2 Inch Corded Angle Grinder 750W,11500Rpm Electric Power Grinder with Grinding Wheel 2 Cut Off Wheel Flat Disc,2-Position Side Handle for Metal Surface Cutting/Grinding/Polishing

  • ✅【Lightweight & Compact Design】Compact design with small 4-1/2" diameter barrel and this power grinder tool weighs 4 lb, making it easy for homeowners to handle while it cuts metal, tile, concrete, and other materials..
  • ✅【More Durable In The Long Term】This electric angle grinder is powered by mains electricity.Owing to the uninterrupted electricity supply corded angle grinders have unlimited run time and are therefore suitable for continuous use where a great deal of driving force is required. As a result,the corded grinder is more heavy-duty and more durable in the long term..
  • ✅【Multiple Purposes】The handy angle grinder is a handheld side angle grinder with a metal grinding wheel,flat dis and 2 cut off wheels that can be used for a variety of metal fabrication jobs that include cutting, grinding, deburring, finishing and polishing..
  • ✅【All Design For You】Corded angle grinder feature a spindle lock for easy accessory changes(spanner included).The soft grip handle improves user comfort and control.The extra large paddle switch for comfortable operation.What's more,the two-position side handle allows for greater control and utility. It can switch from left to right, for additional control..
Check Stock

SUPER DEAL Upgraded 300W Electric Ice Shaver Ice Shaved Machine Snow Cone Maker 145 lbs (Orange)

  • ... bit of elbow grease, listen to the gentle scraping and watch chunks of ice turn into mound after mound of soft snow. Dessert is done!.
  • ★ This machine, due to its superior material and delicate workmanship, ensures great durability, safety and high efficiency. Powered by electricity, it is able to shave a hard and large ice into tiny one. Also, it comes with a stainless steel bowl for convenience. Isn't it a practical item for each household?.
  • ★ All stainless steel waterproof construction stands years of use and guard against rust, heavy cast base offer fully stable workstation to ensure vibration and noise will be deducted to the lowest degree. Easy to control water-resistant on/ off switch, automatically cuts off when hopper handles in open to ensure 100% safe to use..
  • ★ A Commercial grade stainless steel shaving blade provide softer finer ice, rust resistant, environmental-friendly varnished yield healthy, large amount of fluffy snow ice. Produce 143 lbs of shaved ice per hour to meet demands of large amount of ice in a relatively short time.The Perfect Marriage Of Effiency and Price..
Check Stock

Smart Chopper (Chop ’N Prep Chef)

  • Total Capacity : 1.35 L Funnel Capacity (with measurements) : 50 ml allows adding liquids..
  • Easy to use and clean. Q warranty applicable on blades and chopper top..
  • Plastic Colour: Red Size: 15.60 x 19.50 cm No. of Pieces: 1.
  • A fantastic time-saving solution for chopping and belending various types of food quickly and easily..
  • No electricity needed - just pull the cord. Blades chop 288 extra-fine knife cuts on less than 15 seconds..
Check Stock