Categories

Best Electrode Material

Champion Iridium 9407 Spark Plug (Carton of 1) - RER8ZWYCB4

  • Champion Iridium - Maximum Performance. Premium Spark Plug.
  • Iridium center electrode delivers maximum life.
  • Fine-wire center electrode and V-trimmed for greater ignitability.
  • V-trimmed ground electrode promotes sharper spark focus.
  • Maintains stable operating temperature under all engine loads.
  • Heat-Active alloy allows electrodes to reach optimal temperature quickly.
  • Champion iridium spark plugs feature a fine wire iridium center electrode that is laser-locked to the center electrode.
  • Every Champion iridium spark plug features a platinum ground electrode to ensure high performance and long life.
  • The fine-wire center electrode and platinum V-trimmed ground electrode produce the sharpest spark focus.
  • This provides the greatest engine performance regardless of the engine type or ignition system.
  • Exclusive heat-active alloy allows the electrodes to reach optimal temperature quickly and maintain stable operating temperature under all engine loads.
  • The Champion iridium spark plug fine-wire center and platinum ground electrode provides the sharpest spark focus for maximum plug performance.
Check Stock

Universal with Resistance Type Car Iridium Spark Plugs 4 Pack (SANTANA,Jetta Gas-only)

  • Center electrode, 0.6MM tip design, enhanced ignition performance, stable combustion.
  • Iridium is a precious metal material with a high melting point and strong corrosion resistance. It is chemically stable..
  • The center electrode has a thinner firing end, which tends to accumulate more electric energy and ensure a good start of the car..
  • The center electrode consumes less heat, is easy to spread, and burns more fully.
  • This Iridium spark plug has a life of about 80,000 kilometers..
Check Stock

2% Thoriated TIG Welding Tungsten Electrodes 3/32” x7” 10-Pack

  • TOP QUALITY 3/32" 2% Thoriated Tungsten Electrodes for TIG Welding.
  • TOP RATED Ten (10) Pack of 2% Thoriated Tungsten Electrodes.
  • TOP VALUE Savings Up to 50% Off Other Marketplace Sellers.
  • TUNGSTEN ELECTRODE SIZE: 3/32" x 7" or 2.4mm x 175mm.
  • TUNGSTEN ELECTRODE MATERIAL: 2% Thoriated (Red) EWTh-2 Material Conforms to: ANSI/AWS A5.12, JIS, DIN EN 26848, ISO 6848..
Check Stock

2% Lanthanated TIG Welding Tungsten Electrodes 3/32” x 7” 10-Pack

  • TOP QUALITY 3/32" 2% Lanthanated Tungsten Electrodes for TIG Welding.
  • TOP RATED Ten (10) Pack of 2% Lanthanated Tungsten Electrodes.
  • TOP VALUE Savings Up to 50% Off Other Marketplace Sellers.
  • TUNGSTEN ELECTRODE SIZE: 3/32" x 7" or 2.4mm x 175mm.
  • TUNGSTEN ELECTRODE MATERIAL: 2% Lanthanated (Blue) EWLa-2 Material Conforms to: ANSI/AWS A5.12, JIS, DIN EN 26848, ISO 6848..
Check Stock

E7018 3/32'' Welding Electrode Rods Carbon Steel Welding Electrode 5Lb for Mild or Low Alloy Steels

  • Material: The package includes 5LB E7018 3/32'' basic carbon steel electrode.
  • Standard: AWS A5.1 E7018 ISO2560-A E42 3 B 1 2 GB/T5117 E5018.
  • Advantage: The E7018 Stick welding rod is a multi-purpose electrode with excellent handling properties. 7018 Arc welding rod performs particularly well when welding mild or low alloy steels such as bridges, construction, shipbuilding and pressure vessel fabrication, to name a few. E7018 Stick electrode can also be used in construction and maintenance of a series of construction machinery such as bulldozers, agricultural or mining equipment.
  • Application：E7018 carbon steel electrode Used to weld the Marine steels (A、B、D、E、AH36、DH36、EH36）and the same grade strength low carbon steel, mechanical performance , impact value can be as high as 150J @ -30 ℃. AC & DC.
  • Service: Fox Alloy Time-proven formulation.
  • A team of experienced welding engineers ready to answer all your welding questions.
Check Stock

Welding Electrode Holder 400AMP Heavy Duty Holding Welding Plier Fit for ARC Welder Welding Machine Stick Electrode Clamp of Welding Stinger

  • Welding rod holder Accepts rods up to 5/16''.
  • Electrode thickness:1/16-5/32(1.6-4.0mm) This Electrode holder is made of High Quality Brass material with Insulated Handle for high conductivity and improved cable connections..
  • Well-organized grooved jaw for firm grip of rods indifferent positions.Screw type 400A holder.
  • Well made welding rod holder,Size: 21.5*8*4CM (8.45*3.15*1.55inches).
  • high temperature/high impact-resistant molded fiberglass fully insulated body to protect against electrical shock and have powerful spring loaded non-slip insulated clamping jaws to hold the electrode tight so it will not slip while welding..
  • Electrode holder is Made from high quality materials for high conductivity and improved cable connections. Supplied with an allen wrench and cable connection ferrule, assuring efficient connnection and minimizing cable strand breakage at the connection..
Check Stock

Denso (4702) IK20TT Iridium TT Spark Plug, (Pack of 1)

  • Larger spark translates to more power and superior fuel economy.
  • 0.4 mm iridium center electrode, world’s smallest diameter that maximizes firing potential.
  • 0.7 mm needle tip ground electrode, promotes higher spark energy and less heat quenching.
  • DENSO patented 360 degree laser welding process, ensuring exceptional quality bond and structural strength with the iridium center electrode..
Check Stock

Denso (3297) SK20R11 Spark Plugs, Pack of 4

  • Twin-tip technology with 11 mm platinum center electrode and 11 mm titanium enhanced ground electrode.
  • Improve fuel economy, better acceleration and faster starts than all other single platinum plugs.
  • Purified alumina powder insulator provides exceptional dielectric strength and thermal conductivity, allowing the material to stand up to extreme stress.
Check Stock

Electrode Holder 500 Amp Welding Electrode Holder Set, Heavy Duty Jaw Holding Plier Electrode Clamp for Arc MMA Welder,Black

  • 【High Quality Welding Electrode Holder】The upper and lower clamps of the electrode clamp are made of high copper alloy for maximum conductivity and strength. High quality electrode holder with 500A current capacity, comfortable insulated handle, convenient and easy to operate. Ideal for most arc, MMA, hand welding work.
  • 【Heat-resistant insulation for Safety】The handle is molded from a durable glass-filled nylon material for good heat and impact resistance. Glass-filled nylon handle and clamp insulated for maximum operator protection and safety.
  • 【Groove Jaw Design】The grooved jaw for firm grip of rods in 45°, 90°, 135°, 180° positions. Clamping Device holds the stick electrode tight so it will not slip while welding and transfers the welding current to the stick electrode.
  • 【Welding Chipping Hammer & Wire Scratch Brush】Welding chip hammer is made of high strength and toughness steel. Dual-headed design, one end is flat chisel, the other end is pointed chisel, convenient operation in narrow space.Coil spring handles reduce vibration and improve comfort. The wire brush is made of stainless steel bristles and with wooden handle, they are durable and have a strong cleaning ability..
  • 【Work Great】Which are easy to remove and clean corrosi....
Check Stock

Denso (4507) PQ16TT Platinum TT Spark Plug, (Pack of 1)

  • Twin-tip technology with 11 mm platinum center electrode and 11 mm titanium enhanced ground electrode.
  • Improve fuel economy, better acceleration and faster starts than all other single platinum plugs.
  • Purified alumina powder insulator provides exceptional dielectric strength and thermal conductivity, allowing the material to stand up to extreme stress.
Check Stock

Reboot Welding Electrode Holder 300AMP Copper Heavy Duty Jaw Holding Plier Electrode Clamp of Welding Machine ARC Welder American Design

  • Large 300Amp welding electrode holder provides durability, 1/4~7/8 inch electrode capacity..
  • Applicable to use with MMA ARC Welders 200 300 Amp, Suit for various kinds of Stick Welding Rods Electrodes etc..
  • Electrode holder is made of High Quality Brass material with Insulated Handle. Special Design for Easy Cable Connection with Free Spanner and Spacing Sheet.
  • 100% Customer Satisfaction Guarantee:All products from Reboot have 1 Year's after-sales customers service guarantee.Please contact us for any assistance..
Check Stock

Jacazooy Welding Electrode Holder 4.9ft Stick Copper Plier Ground Clamp MMA Mini Welding Rod Copper Clamp Tool Accessories With Cable

  • ✔️The goods are mixed in black and white and shipped randomly. Please don’t take the order if you mindThe Welding Electrode Holder is made of all copper clamp head and special insulation heat-resistant material. High temperature resistance, non-conductive, suitable for long-term use..
  • ✔️The Welding Ground Clamp is suitable for a welding arc.Features wide grip jaws to ensure a firm connection.Grounds work to be welded to a good electrical ground earth..
  • ✔️ This welding accessories is made of copper clamp head, strong current.It is not easy to scald with pure copper forging.Also,the welding electrode rod in the Electrode Holder is not easy to fall off for the high strength Multi-angle occlusion..
  • ✔️The welding accessories have a common advantage: Copper guide, pure copper wire, stable and durable, thick handle, high-quality upper and lower jaws, not easy to oxidize with heat, strong bite force..
  • ✔️ The Welding Electrode Holder with cable is 6.5ft long and the Welding Ground Clamp with cable is 4.9ft long. Please allow the manual measurement data to deviate slightly. (0.1-0.2ft error).
Check Stock

Bonsicoky 2Pcs Ground Bus Bar Terminal Block, 5 Terminal Positions Wire Screw Terminal Brass Electrical Grounding Bars Block

  • 【Better electrical performance】: The excellent electrical conductivity of the copper material on the surface of the copper-clad steel grounding electrode makes its own resistance value much lower than that of conventional materials..
  • 【Wide range of applications】: Copper-clad steel grounding electrodes are suitable for grounding construction under different soil moisture, temperature, PH value and resistivity changes..
  • 【Low construction cost】: Compared with the traditional construction method of pure copper grounding rod and grounding strap, the cost of copper-clad steel grounding electrode is greatly reduced. (Moreover, it has the strength that the pure copper ground rod cannot reach)..
  • 【Unique manufacturing process】: The copper-clad steel grounding electrode adopts a cold-rolled and hot-drawn production process to achieve metallurgical welding between copper and steel. So as to ensure the perfect combination of copper layer and steel layer, it can be drawn arbitrarily like drawing a single metal without disjointing, peeling and cracking..
  • 【Superior corrosion resistance】: The copper clad steel ground electrode composite interface adopts high temperature 4D electroplating, the surface copper layer is ≥0.254mm/10mils, there is no resi....
Check Stock