Categories

Best Electrode Rods

ORRIL 300A American Style Welding Electrode Holder for ARC MMA Welder

  • 1.300Amps Welding Electrode Holder American Style.
  • 2.With 35-50 quick plug. Easy connected..
  • 4.Applicable to use with MMA ARC Welders 120 200 250 Amp, Suit for various kinds of Welding Rods etc..
  • 5. Pack of 1 PC 300A electrode holder with 35-50 quick plug 3M cable.
Check Stock

Reboot Welding Electrode Holder 300AMP Copper Heavy Duty Jaw Holding Plier Electrode Clamp of Welding Machine ARC Welder American Design

  • Large 300Amp welding electrode holder provides durability, 1/4~7/8 inch electrode capacity..
  • Applicable to use with MMA ARC Welders 200 300 Amp, Suit for various kinds of Stick Welding Rods Electrodes etc..
  • Electrode holder is made of High Quality Brass material with Insulated Handle. Special Design for Easy Cable Connection with Free Spanner and Spacing Sheet.
  • 100% Customer Satisfaction Guarantee:All products from Reboot have 1 Year's after-sales customers service guarantee.Please contact us for any assistance..
Check Stock

Electrode Holder 500 Amp Welding Electrode Holder Set, Heavy Duty Jaw Holding Plier Electrode Clamp for Arc MMA Welder,Black

  • 【High Quality Welding Electrode Holder】The upper and lower clamps of the electrode clamp are made of high copper alloy for maximum conductivity and strength. High quality electrode holder with 500A current capacity, comfortable insulated handle, convenient and easy to operate. Ideal for most arc, MMA, hand welding work.
  • 【Heat-resistant insulation for Safety】The handle is molded from a durable glass-filled nylon material for good heat and impact resistance. Glass-filled nylon handle and clamp insulated for maximum operator protection and safety.
  • 【Groove Jaw Design】The grooved jaw for firm grip of rods in 45°, 90°, 135°, 180° positions. Clamping Device holds the stick electrode tight so it will not slip while welding and transfers the welding current to the stick electrode.
  • 【Welding Chipping Hammer & Wire Scratch Brush】Welding chip hammer is made of high strength and toughness steel. Dual-headed design, one end is flat chisel, the other end is pointed chisel, convenient operation in narrow space.Coil spring handles reduce vibration and improve comfort. The wire brush is made of stainless steel bristles and with wooden handle, they are durable and have a strong cleaning ability..
  • 【Work Great】Which are easy to remove and clean corrosi....
Check Stock

Baluue TIG Welding Tungsten Electrodes Ground Finish Welding Rods Thoriated Electrodes for WP

  • lanthanated tungsten rods Multiple choices for your high-quality welding..
  • lanthanated electrode Pure Tungsten forms a clean, balled tip when heated and provide great arc stability for AC welding with a balanced wave..
  • Welding Tungsten Electrode Rod Good mechanical cutting performance, good electrical conductivity, easy operation and long service life..
  • tig tungsten Smallest electron emission, low steam pressure, low resistance and good electrical conductivity..
  • ground annealed Tungsten electrodes Pure tungsten welding electrodes also provide good arc stability for AC sine wave welding, especially on aluminum and magnesium..
Check Stock

Reboot Welding Electrode Holder Twist Type 400AMP Full Copper Heavy Duty Electrode Clamp Accessories for Welding Machine ARC MMA Welder

  • Electrode holder is made of High Quality Brass material with Insulated Handle..
  • Electrode thickness:1/16-5/32(1.6-4.0mm).
  • Electrodes burn within 1''from the head and can be bent to any angle and still be held securely.
Check Stock

Hypertherm 420240 Electrode, XPR 80 Amps Mild Steel

  • 10pcs ARC welding rods Electrodes Mild steel 1.6mm - 3.2mm E6013 General purpose.
  • General purpose maintenance and repair electrode for welding low carbon steels in any position.
Check Stock

TOOLIOM 195A Stick Welder 110/220V Dual Voltage MMA Welder Digital Display IGBT Inverter Hot Start Arc Force Anti-Stick Welding Machine fits 5/32in. (4mm) Welding Rods

  • Can handle E6010 cellulose electrode, ideal for below 5/32 in.(4.0mm) welding rods.Up to 195A, applicable of welding mild steel, carbon steel, stainless steel and cast iron..
  • Built in Hot-start make the arc strik easier, Anti-stick can remove the electrode from the workpiece easily, Arc-force provide smoother welding and deeper penetration..
  • Equipped with multiple protection functions,such as over current protection, over load protection,temperature control..
  • Easy to operate for beginner , can read the output welding current with smart digital display..
  • Comes with a easy carrying handle easy for carry, can be used anywhere you need..
Check Stock

Welding Electrode Holder Cuwiny 300AMP High Quality Copper Electrode Clamp Jaw Holding Plier Fit for ARC Welder Welding Machine Stick Electrode Welding American Design

  • This Electrode holder is Made of high quality Copper materials for high conductivity and improved cable connections. Supplied with an allen wrench and cable connection ferrule, assuring efficient connnection and minimizing cable strand breakage at the connection. (New product promotion, only this week. Reviews and feedback, contact us for 20% off.).
  • Used # 1 AWG Gauge Cable and High-quality Copper..
  • Fit for Arc Welder 200A 300AMP etc,Suit for various kinds of Stick Welding Rods Electrodes etc..
  • The high temperature/high impact-resistant molded fiberglass fully insulated body to protect against electrical shock and have powerful spring loaded non-slip insulated clamping jaws to hold the electrode tight so it will not slip while welding..
  • Satisfactory after-sales service:Cuwiny products have 1 Year after-sales customers service guarantee.Please contact us for any assistance..
Check Stock

TOOLIOM TIG Welding Tungsten Electrode 2% Thoriated Tungsten 3/32'x 7' (Red, EWTh-2) 10-Pack

  • Electrode Size: 3/32" x 7" or 2.4mm x 175mm.
  • Material:2% Thoriated Tungsten (Red, EWTh-2) adhering AMERICAN Welding Society standard AWS A5.12M/A5.12:2009 conformance.
  • Performance:Good welding performance,long life and operate easily.
  • To be used on TOOLIOM TL-200T TIG Welder(High Frequency TIG Welding).
  • Package:Ten (10) pack of premium thoriated tungsten rods ,vacuumed sealed, no oxidation,long time preservation.
Check Stock

HONE ARC Welder, Actual 185Amp 110V/220V Stick Welder with Lift Tig Function, Digital IGBT Inverter Welding Machine with Hot Start Arc Force Anti-Stick VRD, High Duty Cycle for 1/16\-5/32\ Welding Rod

  • ...deeper penetration for thick workpiece. The real welding current on 110V and 220V are shown separately, you can't go wrong..
  • ➠【Automatic Hot Start and Arc Force】Amazing hot-start make you arc striking immediately while you touch the rod on the workpiece, ideal for the rods E6013 E7018 E6011 etc...and cellulose electrode E6010. Powerful Arc-force provide smoother welding and deep welding pool, steady arc, spatter less, the pretty nice beads, specially welding thin workpiece..
  • ➠【Lift TIG Function】This Welder Machine come with dual voltage 110V/220V has good Lift-arc TIG function, just touch the tungsten rod to the workpiece and lift off, easily arc starting, don't need to scratch it, it's like you getting a TIG welder for free..
  • ➠【Safe and Stable】This Soldadora has Anti-stick function easy the electrode removal from the workpiece, VRD function makes you safer, and multiple protection functions set internally, to prevent over heat, over current, over-voltage, under-voltage and short circuit damage to make sure safely operation. Capable of welding mild steel, carbon steel, stainless steel and cast iron..
  • ➠【1 Year Warranty】The compact design and powerful function is so easy to use that it can be used by novice or master welder.
Check Stock

CANAWELD Arc Welding Stick Welder MMA 201 MADE IN CANADA 200 Amp TIG Welder (LIFT) Weld up to electrode #4 IGBT Inverter Lightweight 220V(150 A @%100 Duty Cycle) Generator compatibale (MMA 201)

  • ✅High power output, 150A @ 100% Duty Cycle & 200A @ 30% Duty Cycle. Tested in (104°F /40°C), designed for the toughest conditions. Carrying belt for easy transportation..
  • ✅Two available welding process: Stick and TIG (Lift). Ability to use up to 165 feet (50 meters) leads without any power loss at the weld. Excellent welding characteristics with any type of rods..
  • ✅Automatic hot start which improves the arc striking with the most difficult rods. Arc Force Function to automatically select the best welding arc dynamics..
  • ✅Electrode anti-Sticking function. Ability to work outdoors with adequate power generator. Fan cooled and thermally protected against overheating..
  • ✅Large size Dinse style welding connectors. Metal face panel. Comprehensive 3 Year Warranty..
Check Stock

TIG Welding Tungsten Electrodes 2% Thoriated Red Tig Tungsten Assorted, 5PCS 3/32'x 7' + 5PCS 1/16'

  • Premium 10 pack of assorted red WT20 2% thoriated tungsten electrodes for tig welding.
  • With reliable arc-striking and a low burn-off rate.
  • Electrode size: 3/32" x 7" or 2.4mm x 175mm AND 1/16" x 7" or 1.6mm x 175mm.
  • You get 5PCS 3/32"x 7" + 5PCS 1/16" 2% thoriated (Red) tungsten.
  • The tungsten rods can be very good operation even in high current range on DC.
Check Stock

Weber 67532 Igniter Kit, Genesis II 330/335

  • Weber 67532 Igniter Kit for Genesis II 330 and 335 Grills Manufactured in 2019.
  • Includes: Ignition module, 6 terminal (1) Electrode, 36″, black (1) Electrode, 27″, yellow (1) Electrode, 46″, green (1) Electrode, 32″, red (1) Ground wire, 38″, blue (1) Sideburner wire, 38″, white (1) CLIP WIRE SADDLE SLF ADHSIVE NTRL GP 19 1 SWITCH MOMENTARY IGN CHROME/GRY GP 17 1 WIRE ASSY IGN LOW VOLTAGE C1 3B GP 17 1 SCREW 1/4-20 X .625 DP HH MAGNI 510 OUS 1 SCREW 6-32 X 1/4 PPH SS 1 ELECTRODE SUM S/B ’03 1 ELECTRODE CLIP SUM S/B ’03 1 INST IGN MDL/ELECTRODE OC GEN 19 ENG 1.
Check Stock