Categories

Best Electrode Tungsten

Baluue TIG Welding Tungsten Electrodes Ground Finish Welding Rods Thoriated Electrodes for WP

  • lanthanated tungsten rods Multiple choices for your high-quality welding..
  • lanthanated electrode Pure Tungsten forms a clean, balled tip when heated and provide great arc stability for AC welding with a balanced wave..
  • Welding Tungsten Electrode Rod Good mechanical cutting performance, good electrical conductivity, easy operation and long service life..
  • tig tungsten Smallest electron emission, low steam pressure, low resistance and good electrical conductivity..
  • ground annealed Tungsten electrodes Pure tungsten welding electrodes also provide good arc stability for AC sine wave welding, especially on aluminum and magnesium..
Check Stock

GOONSDS Tungsten Filament 99% Purity Tungsten Metal Wire Coil,Length 1m,Diameter 0.04mm

  • Purity: W ≥ 99% . Dimensions: diameter:0.04-0.1mm(Buy on demand) , length:1m. Package: 1 x Tungsten wire.
  • Tungsten and its alloys are widely used in electronics and power industry because of its strong plasticity, low evaporation rate, high melting point and strong electron emission ability. For example, due to its high luminous efficiency and long service life, tungsten filament is widely used in the manufacture of various bulb filaments, such as incandescent lamp, iodine tungsten lamp, etc,.
  • Tungsten wire is used to make direct hot cathode and grid of electronic oscillator tube and side hot cathode heater in various electronic instruments. The properties of tungsten make it suitable for TIG welding and other electrode materials similar to this kind of work..
  • It is widely used in aerospace, aviation, oil drilling, electrical instrument and other industries, such as manufacturing heat sink, balance weight of control rudder and contact materials of switch, circuit breaker, spot welding electrode, etc..
  • We are a supplier of high quality metal materials. We can provide you with the materials you need. You can contact us to get any materials you need.
Check Stock

TIG Welding Tungsten Electrodes 2% Thoriated Red Tig Tungsten Assorted, 5PCS 3/32'x 7' + 5PCS 1/16'

  • Premium 10 pack of assorted red WT20 2% thoriated tungsten electrodes for tig welding.
  • With reliable arc-striking and a low burn-off rate.
  • Electrode size: 3/32" x 7" or 2.4mm x 175mm AND 1/16" x 7" or 1.6mm x 175mm.
  • You get 5PCS 3/32"x 7" + 5PCS 1/16" 2% thoriated (Red) tungsten.
  • The tungsten rods can be very good operation even in high current range on DC.
Check Stock

WeldingCity 10-pcs TIG Welding Tungsten Electrode Tri-Element Non-Radioactive (Purple/AWS: EWG) 3/32\ x 7\ | 10-pk

  • 10-pk premium TIG welding Tungsten electrodes tri-element non-radioactive. Electrode diameters: 0.040" (0.5mm), 1/16" (1.6mm), 3/32" (2.4mm), 1/8" (3.2mm) and 5/32" (4.0mm).
  • AWS Classification: EWG (Purple). Conform to ANSI/AWS Standard A5.12M/A5.12:2009 ISO 6848:2004 MOD. Ground annealed..
  • Mixed tri-oxides of Lanthanum, Zirconium and Yttrium with total rare earth composition around 1.5% - 1.8%.
  • Tungsten remains. Non-radioactive Tungsten electrodes.
  • excellent substitute for Thoriated Tungsten electrodes. Wide current range and low burn-off rate. Easy arc starts and good stability..
  • Package available: 10-pcs/box for each size of 0.040.
Check Stock

Forney - 85657 9FV TIG Torch

  • TIG TORCH FLEXIBILITY-torch head adjusts to make any angle weld, ideally on thin materials.
  • AIR COOLED TIG TORCH- size 9, single flexhead TIG torch with valve located on handle.
  • COMPATABLE WITH FORNEY WELDERS- the 9FV TIG Torch holds a 125 AMP capacity with an electrode range of . 02 - 3/32". That can be used with a 200 amp Forney Welder or a lower amp welder with a size 25, DINSE connection.
  • PRODUCE A HIGH QUALITY WELD-using Forney's TIG Torch on basic materials such as: stainless steel, titanium, magnesium, aluminum and copper.
  • INCLUDES: 12. 5’ torch with 3/32” collet and tungsten electrode, size #6 nozzle, 5/8” connector and 36” gas hose.
Check Stock

TOOLIOM TIG Welding Tungsten Electrode 2% Thoriated Tungsten 3/32'x 7' (Red, EWTh-2) 10-Pack

  • Electrode Size: 3/32" x 7" or 2.4mm x 175mm.
  • Material:2% Thoriated Tungsten (Red, EWTh-2) adhering AMERICAN Welding Society standard AWS A5.12M/A5.12:2009 conformance.
  • Performance:Good welding performance,long life and operate easily.
  • To be used on TOOLIOM TL-200T TIG Welder(High Frequency TIG Welding).
  • Package:Ten (10) pack of premium thoriated tungsten rods ,vacuumed sealed, no oxidation,long time preservation.
Check Stock

Welder Machine Accessories 5 in 1 Stick Welding Electrode Holder 300A Assembly with 12ft Cable 10-25 Cowhide Gloves Mask Helmet Ground Clamp Hammer

  • ✅Package Content: Electrode holder with 12ft cable/ cowhide welding gloves large / simple mask / 300 amp ground clamp/ slag hammer.
  • ✅HIGH-QUALITY ground clamp:Made from qualified materials,the earth clamp has excellent clamping power and superior electrical connections. SUITABLE FOR:Stick welding, submerged arc welding, gas metal arc welding and gas tungsten arc welding applications..
  • ✅Cowhide Gloves:Carefully selected high-quality split cowhide is exceptionally durable and puncture resistant, protecting hands from the hard environment in a wide variety of tasks.
  • ✅300A Electrode holder with cable:300 Amp Welding Electrode Holder Lead Assembly - Dinse 10-25 Connector - #2 AWG cable (12 ft).
  • ✅5 IN 1:Multi-purpose household and welding repair tool kit.
Check Stock

WeldingCity 10-pk Premium TIG Welding Tungsten Electrode Rod 2.0% Thoriated Red EWTh20 3/32 x 7 | 10-pcs

  • Pack of 10-pcs premium TIG welding Tungsten electrodes 2.0% Thoriated. AWS Classification: EW-Th2 (Red). Conform to ANSI/AWS Standard A5.12M/A5.12:2009 ISO 6848:2004 MOD..
  • Higher current range and stability. Better arc starts with lower tendency to spit. Medium erosion. Increased resistance to weld pool contamination..
  • Available Tungsten electrode diameters: 0.040" (0.5mm), 1/16" (1.6mm), 3/32" (2.4mm), 1/8" (3.2mm) and 5/32" (4.0mm).
  • 10-pcs/box Tungsten electrodes (2.0% Thoriated EW-Th2) with quantity discount. Buy More Save More!.
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

WeldingCity 10-pk Premium TIG Welding Tungsten Electrode Rod Pure Green EW-P 3/32 x 7 | 10-pcs

  • 10-pcs premium TIG welding Tungsten electrodes pure (Tungsten >99.5%). Electrode diameter available: 0.040" (0.5mm), 1/16" (1.6mm), 3/32" (2.4mm), 1/8" (3.2mm) and 5/32" (4.0mm).
  • AWS Classification: EW-P (Green). Conform to ANSI/AWS Standard A5.12M/A5.12:2009 ISO 6848:2004 MOD. Ground annealed..
  • Better stability when used with alternating current. Lower current-carrying capacity and tends to spit at higher current. May balls easily. Low cost. Usually used for non-critical welds only..
  • 10-pcs/box Tungsten electrodes (Pure EW-P). With quantity discount. Buy More Save More!.
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

Forney 85654 TIG Torch for Forney Multi-Process Welders fits Forney 322 & 324

  • DESIGNED FOR FORNEY- Air cooled size 17FV single-piece torch and consumables. Uses 7 pin connector designed For Forney MP style machines.
  • FUNCTIONAL- Integrated gas line with valve on handle. When using this torch, amperage is controlled locally on the machine and the trigger is on/off. An optional foot pedal will allow control of amperage remotely.
  • POWERFUL AND DURABLE- 150 Amp capacity. Electrode range: .020 - 3/32" (0.5-2.4mm). Compatible with 200 Amp and under machines with a size 25 Dinse connection.
  • INCLUDES- 12.5' torch with 1/8" collet and tungsten electrode, size #7 nozzle, 5/8" connector, and 36" gas hose..
Check Stock

WeldingCity 10-pk Premium TIG Welding Tungsten Electrode 1/16'-3/32' x 7' ASSORTED ALLOYING Green-Red-Gray-Gold-Blue

  • Premium TIG welding Tungsten electrodes. Conform to ANSI/AWS Standard A5.12M/A5.12:2009 ISO 6848:2004 MOD..
  • Available Tungsten alloying: 2.0% Thoriated (EW-Th2/Red), 1.5-1.8% mixed tri-oxides of Lanthanum, Zirconium and Yttrium (EWG/Purple, non-radioactive), 2.0% Lanthanated (EW-La2/Blue), 2.0% Ceriated (EW-Ce2/Gray), 1.5% Lanthanated (EW-La15/Gold) and Pure (EW-P/Green)..
  • Tungsten electrode diameters: 0.040" (0.5mm), 1/16" (1.6mm), 3/32" (2.4mm) and 1/8" (3.2mm).
  • Packages available: 10-pcs electrodes of 0.040", 1/16", 3/32" and 1/8" with different alloying assortedly packed in one box. With quantity discount. Buy More Save More!.
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

Weldpro 200 Amp Inverter Multi Process Welder with 3 Year Warranty Dual Voltage 220V/110V Mig/Tig/Arc Stick 3 in 1 welder/welding machine

  • Weldpro's flagship 200 amp MIG welder that goes beyond MIG and Flux Core welding! AND 3 YEAR WARRANTY!.
  • The model 200 is also capable of true lift TIG welding (without foot pedal) as well as stick welding and aluminum welding with the optional spool gun. The MIG 200 is an intuitive synergically designed MIG / Flux Core welding machine..
  • MIG,Stick or TIG weld all from a single compact, space-saving unit. Welding Amperage Ranges230V: MIG: 40-200A.
  • MIG welding wire diameter: .023 .030 .035, welding thickness: 19ga- 0.197 in.
  • TIG tungsten needle diameter: 0.063 0.094, welding thickness: 25ga- 1/4 in.
  • MMA electrode Dia: 0.063-0.157 acid electrode, alkaline electrode, welding thickness: 14ga-0.315in.
  • Dual digital display easy to read and set amperage and wire speed for repeatable welds every time. VRD high temp and overload protection with indication. User adjustable inductance settings..
Check Stock

3mirrors ALUMINUM Tungsten Electrode Sharpener Grinder TIG Welding Rotary Tool 24 Guides w/Safety Housing & Cut-Off Slot, Multi-Angle& Offsets, 5 Double Sided Diamond Grind Wheels, 2 CNC Mandrels

  • It is very light and convenient. But very strong and precise. All holes are stationary, so we can set an offset compensation for each size hole to make sure all tungsten's tip center is on the grinding center point, this offset can ensure that the lines on the tip of the tungsten electrode are as straight as possible. If the hole position is variable, offset compensation cannot be set..
  • Tungsten sharpening tool also has tungsten cut-off port processing. After the tungsten you are using is worn or contaminated, you can use the cut-off port for cutting, so that you can use it again. Besides, A Flat Grinding Block is specially designed, can be used to grind a flat tip vertically, for use if need..
  • All holes designed to use the same height of diamond wheel. Needn't to set the height again and again. Very easy to install and use. Save your ready time for welding, Welders deserve it! Product made of Upgrade aluminum alloy material, CNC finishing more Durable, there will be no trouble of high temperature melting..
  • This tool is essential for real professionals. We know welders, so we know what they need. Welders are very particular, pursue perfection. But some of them forgot health. Innovative design! This tool comes with Dus....
Check Stock