Categories

Best Electronic Ceramic Components

1390pcs Electronic Components Kit Assortment 100 LEDs +100 Diodes +170 Transistor +120 Electrolytic Capacitors + 600 Resistors + 300 Ceramic Capacitors

  • [Electronic components set include]:Include LED, transistor, capacitor set, resistor, diodes..
  • [Easy to store]:They are well packed and assorted in small bags for convenient storage..
  • [Saving time]:These electronic component are assorted by type, high preciseness and stability, which saves you time and labor..
  • [Great component kit]:This is a great assortment of components for electronic professionals or enthusiasts..
  • [Value for money]:There electronic components kits include 5 assortments, 1390pcs in total..
Check Stock

Electronic Component Assortment kit 1390Pcs LED Diode Transistor Capacitor Resistor

  • All products are tested for stability, consistency and reliability,Ensure product excellence..
  • This is a great assortment of components for electronic professionals or enthusiasts..
  • The kit includes diodes, resistors, transistors, LED diodes, electrolytic capacitors, ceramic capacitors..
  • If any problem, please contact us. We will give you a satisfactory solution as promised..
Check Stock

EDSRDRUS Thermal Adhesive Tape 0.4 Inches x 82 Feet High Performance Thermally Conductive Tape, High Durability, Apply for Heat Sink, LED Strips, Computer CPU, GPU,etc

  • Widely Used: From the hardware to the printing industry, EDSRDRUS thermal conduction tape has many applications. It’s perfect for electronic appliances, digital products, mobile phones, radiators, high-power electronic components, circuit board heat dissipation, computer CPU, GPU, and more..
  • Material: EDSRDRUS double-sided thermally conductive tape combines fiberglass and acrylic adhesive with conductive ceramic powder for high thermal conductivity and insulating properties. Coated with strong acrylic adhesive, it’s removable, repositionable, and leaves no residue. It’s easy to install, efficient, and perfect for electronic devices..
  • High Stability: With high and stable thermal conductivity, EDSRDRUS thermal tape lasts longer than standard heat-dissipating double-sided tape. It operates at temperatures of 80-120℃ (176-248°F) for at least 60 months..
  • Excellent Stickiness: Our exceptional adhesive bonds securely to a variety of surfaces. For optimal adhesion, the surface must be clean, dry, and flat..
  • Precautions for Use: Before use, please clean the surface of dust. Then cut, apply, and press the tape down as needed. Manually remove the backing liner. To keep the adhesive layer secure, avoid leaving fingerprints on it..
Check Stock

Molence DIY Electronics Components Kit Assortment, Resistors 1818PCS, LED, Triode, Capacitors, Diodes, PCB, Potentiometer, Variable Resistance, Stabilivolt for Arduino UNO MEGA2560 Raspberry Pi MCU

  • This kit Includes 1818pcs of the most important and useful electronic components. Would be a great gift for a family member or friend who tinkers with electronics..
  • 820PCS 1/4W 1% Tolerance Metal Film Resistor.
  • 100% compatible for Arduino UNO, MEGA, Raspberry Pi, PLC, Microcontroller..
  • All of electronics components are well packed and assorted in a re-use storage case, convenient to carry and use..
  • The product undergoes rigorous inspection before leaving the factory. If you are not satisfied with the product, please feel free to contact us and we will provide a full refund..
Check Stock

Eight Innovation Electronic Games Advent Calendar

  • A BRAND YOU CAN TRUST: EIGHT is a high quality British brand which has now developed a range of electronic model building kits. Each kit comprises all the components needed to create your own version of classic electronic devices and comes with a clear and concise instruction guide..
  • BUILD YOUR OWN ELECTRONIC GAMES IN THE COUNTDOWN TO CHRISTMAS: Ditch the chocolate and switch to an advent calendar which gives you something tangible on Christmas Eve! If you want to go back to your gaming roots, getting inside the electronics and understanding how they work, then the EIGHT Build Your Own Electronic Games Advent Calendar is the perfect festive countdown for you!.
  • EASY TO ASSEMBLE: Behind each window is an electronic component which allows you to build 24 different electronic games. The EIGHT Build Your Own Electronic Games Advent Calendar comes with a complete instruction manual to guide you through the construction process of each game. Easy to assemble, with all components and relevant wiring included, the EIGHT Build Your Own Electronic Games Advent Calendar is the perfect project for aspiring engineers and can serve as a wonderful learning tool for those who love electronics and how they work. An ideal gift for young budding creators and the nostalgic....
Check Stock

ARKMODEL German U-Boat Type VIIC Submarine 1:48 Scale Models Plastic Hobby Kit

  • ...everything that needs to build an RC running model. Kit includes all plastic parts, metal parts, brass etching tablet, water stickers,specifications, and installation of the chamber components..
  • Used to drive the submarine voyage, snorkeling chamber, all the mechanical and electronic equipment, such as motors, pumps, steering gear, electronic governor, electronic switch, remote control equipment, batteries, etc., are installed in the WTC(water tight Cylinder),WTC need to buy separate. Coating ,RC and glue are not included.
Check Stock

ATKKE 67726 Igniter Kit for Weber Genesis 300 Series Electronic Ignitor Kit with Side-Control Battery Ignition Starter Part 2007 Models Gas Grill for Weber Genesis 310 320 Series Grills Replacement

  • GENESIS 300 SERIES ELECTRONIC IGNITOR KIT - Genesis 300-E and 300-S Series (Model Year 2007) ignitor kit. The distinctive part in this kit is the....
  • PACKAGE INCLUDED - This igniter kit includes one white ceramic U-shaped spark device with electrodes and wires, one electronic igniter module and one....
  • HIGH QUALITY MATERIAL FOR DURABLE AND LONG-LASTING - This igniter kit is made of premium plastic, metal and ceramics. All the components are durable....
  • AN EFFECTIVE WAY TO RE-ACTIVE YOUR GAS GRILL - Nothing beats using a gas grill to make quick and delicious foods while the ignition system plays an....
  • EASY TO INSTALL - The installation is simple and easy. Please prepare a screwdriver in advance. Just remove a couple of screws then you can remove the....
Check Stock

HPYNPES DIY Practical Soldering Practice Kit Practice Learning Electronics Training Board

  • Product introduction: Shake the lucky turntable by NE555 and CD4017 chips combined with LED random output function. The control terminals are button control and vibration switch control. You only need to press the button or shake it, the LED will start to rotate, and the After a while it stops randomly, leaving only one LED light..
  • Designed for Beginners：Special design for electronics starter to learn to solder electronics components. Soldering project kit will improve your electronic knowledge and soldering skills in practice.
  • Easy to Assemble： Electronic DIY kits uses safety materials, effectively avoid corrosion and wear out. Components’ names have been marked on the PCB board and the circuit design is simple. Even beginners can easily solder successfully.
  • Warm Reminder ：DIY electronic components kit requires buyer to assemble and welding, If you don't have any soldering experience, please read the soldering instructions and use soldering tools carefully to avoid safety problem.
Check Stock

12V/24V/220V Aluminum PTC Heating Element, 70℃- 220℃ PTC Thermostat Heater Plate PTC Ceramic Air Heater Miniature Heating 15028.5mm(12V 70℃)

  • 【 Ceramic Insulation Element 】 The ptc heating element is adopt with ceramic insulation, safe to use and can be dry heated for a long time, high reliability.
  • 【 Eco-friendly Aluminum Housing 】This ptc heating plate housing is made of aluminum, eco-friendly, sturdy and durable in use.
  • 【 Wide Application 】 100% brand new and high quality 12v ptc heating element, widely used in Air conditioning, electric heating, automobiles, air curtains, humidifiers, dryers, etc. Also used for car and electronic components preheating.
  • 【 Temperature Resistant Lead Wire 】 Comes with a 15cm lead wire, which is high temperature resistant. It can be easily used to heat solids and gases. Simple structure, easy to install and long service life.
  • 【 Warranty 】 We are here with a 100% product promise to give you the best in customer care! Please feel free to contact us if you are not satisfied with it for any reason. We promise all the issue will be solved within 24 hours.
Check Stock

Daarcin Antistatic Bags, 40pcs 4 Sizes Mixed ESD Bags with Labels for Hard Drive HDD ESD Shielding Bags for Varieties of Electronic Device (4MixedSize)

  • *ITEM:10pcs 3.2x4.7in/8x12cm,10pcs 3.9x5.9in/10x15cm,10pcs 5.9x7.9in/15x20cm,10pcs 8.3x9.5in/21x24cm antistatic bags with 40pcs antistatic labels, MULTI-USE: 3.2x4.7in for 1.8" hard drive, 3.9x5.9in for 2.5" hard drive, 5.9x7.9in for 3.5"hard drive. them also can be used for RAM, I/O memory card, earphone, button battery, and other electronic parts.
  • *SAFETY ENVIRONMENTAL PROTECTION: We bags made from high quality Polyethylene Terephthalate (PET) with an aluminized film, high and low temperature performance of 500c, non-toxic and eco-friendly, no odor.
  • *MOISTURE RESISTANCE OF CLASS II:High quality sealing belt reusable, with high sealing performance, waterproof and dampproof,it have a moisture resistance of Class II, it also can be vacuume to prevent oxidation of electronic components.
  • *MULTI-USE:4 sizes for packaging different electronic components, such as hard drive,Video card,LED light bars,Sensitive electronic components,I/O cards,or store your electronic products like earphone,data cable etc.
  • This is a review program that includes 4 sizes of antistatic bags, perfect for individual buyers, saving you money, but please be sure to review it, so easy, thank you!.
Check Stock

ARKMODEL VIIC Kit 1/48 German U-Boat RC Submarine Include Single Piston Tank WTC

  • ... This kit(hull) comes with almost everything that needs to build an RC running model. Kit includes all plastic parts, metal parts, brass etching tablet, water stickers,specifications, and installation of the chamber components. Used to drive the submarine voyage, snorkeling chamber, all the mechanical and electronic equipment, such as motors, pistons, steering gear, electronic governor, electronic switch, etc., are installed in the WTC.
  • This one VIIC already included WTC (water tight cylinder) Single Piston tank Kit,WTC Size:Length 736mm ,Beam 90mm Already included servos, ESC, BCU.
Check Stock

SunFounder Electronics Fun Kit with 1602 LCD Module, breadboard, LED, Resistor Compatible with Arduino UNO R3 MEGA2560 Raspberry Pi 400 4B 3B 3B+ 2B 2B+

  • Electronic Starter Kit - Our electronic kit has more than 300pcs components you need for getting started into programming compatible with Arduino and Raspberry pi ..
  • Highest Cost Components Kit - Package includes 400 point breadboard,1602 LCD display, servo motors, jumper wires, Dupont wires, color LCD and resistors, capicitors, relay, usb cable, buzzers and etc..
  • 21 Lessons Provided - An upgraded electronic fun kit has more than 20 interesting lessons which will give you a dynamic and creative learning experience..
  • Professional Tutorial Provided -We have prepared many interesting and practical examples online for you to learn to code and program faster and easier..
  • Excellent package - A campact and pretty storage container for you to store all the components kit without losing..
Check Stock

DPL Powder Filling Machine Automatic Weighing Filling Machine 2-100g DPL Powder Filling Machine Automatic Weighing Filling Machine 110v 10-25 Bags/Min

  • 【Fast And Accurate Filling] ——The micro-computer controls the subpackage, Through high-efficiency vibration and electronic weighing technology, The filling accuracy is high (error ≤ 0.2g), And the powder particles can be packed efficiently..
  • 【Specification】—— Packing range of powder filling machine: 1-100g (0.22lbs).
  • 【Considerate Design] —— The whole machine is made of stainless steel, Food grade material, Resistant to corrosion, Rust, Acid and alkali. Stable filling and low noise. This machine is made of stainless steel, Easy to clean and maintain..
  • 【CONVENIENT PRINTING】——Suitable for filling Φ 1.2-10 mm dry and flowing materials, Such as powder: Flour, Milk powder, Coffee powder,Chemical powder and any dry powder, Also suitable for filling round tea (leaf tea is not applicable), Grains, Beans, Seeds, Fruits, Preserved fruits, Spices, Electronic components, Diamonds, hardware, Plastic beads, etc..
  • Not suitable for steel balls, Ceramic beads, Wet materials..
  • 【100% satisfied customer service】——DPL promises 1 year warranty worldwide. Please feel free to let me know whenever your machine fails. I will be there anytime..
Check Stock