Categories

Best Electronic Enclosure Box

Zulkit 5Pcs Project Boxes ABS Plastic Electrical Project Case Power Junction Box Black 3.15 x 1.97 x 1.02 inch (80 x 50 x 26 mm)

  • External Size of the project box(Approx) :3.15" x 1.97" x 1.02"(80 x 50x 26mm)(L*W*H).
  • Inner Size of the project box(Approx):2.95” x 1.77” x 0.79”(75 x45 x 20mm )(L*W*H).
  • Material: ABS,which is durable, sturdy, moisture proof and practical；Net weight of each enclosure box: 24g.
  • Four screw holes inside. If wanted to make one to go in it, such as attaching a board, there would be no problem mounting it..
  • Ideal for electronic projects, power supply enclosure, amplifiers box, etc. Especially suitable for portable projects and battery powered projects..
Check Stock

Tysun ABS Project Box Electrical Enclosure Box Junction Box Electronic Project Case Power Enclosure with Lock Dustproof IP65 Waterproof (15.4'x11.4'x6.3')

  • ★【Features】This electrical enclosure box features moisture proof, sunscreen, anti-corrosion, durable for years use..
  • ★【Size】External Size: 15.4"x11.4"x6.3"(39cm x 29cm x 16cm), Inner Size: 14.57” x 4.15” x 5.91” (37cm x 27cm x 15cm)..
  • ★【IP65 Waterproof Grade】ABS project box is waterproof & weather designed, effectively block splashing water, rain, dust, snow, oil, etc..
  • ★【Easy for DIY】This sturdy project boxes for electronics can be drilled and shaped easily without cracking, so it’s also suitable for your various DIY projects..
  • ★【Wide Application】Electrical junction box ideal for electronic projects, instrument enclosure, power supply units, temperature controller box, etc..
Check Stock

Leviton 51120-1 120/240 Volt Panel Protector 4-Mode Protection Light Commercial/Residential Grade In NEMA 1 Enclosure

  • 120/240V Single Phase Panel Mount Surge Protective Device, 4-Mode Protection, 50kA Max Surge Current Rating, NEMA 1 Enclosure, UL 1449 4th Edition....
  • Type 2 Single Phase Surge Panel with 4-Mode Protection.
  • Real-time diagnostic visual indicator shows power and suppression status for each protected phase.
  • Standard J-Box enclosure with pre-punched standard knock-outs can be easily surface mounted in typical frame construction.
  • Features a low VPR to ensure protection of sensitive electronic devices including LCD TVs and computers.
Check Stock

Adafruit 1947 Touch Shield, 2.8\ TFT for Arduino with Capacitive Touch

  • This enclosure is only compatible with the Circuit Playground Express!.
  • This minimal but elegant acrylic case will turn your board into an electronic snowflake.
  • The enclosure is designed to snap together securely with no tools required.
  • lic case will turn your board into an electronic snowflake. The enclosure is designed to snap together securely with no tools required. You can still press all the buttons and slide the switch thanks to a clever plastic widget fitted inside.
  • The case winds around all the touch pads so you can still touch them or attach alligator clips.
Check Stock

YaeCCC Silver Extruded Aluminum Electronic Enclosure Project Box Electronic DIY Case,9.84'x 8.07'x 3.94' / 250 x 205 x 100mm (LWH)

  • Project Box Has Multiple Slots for PCB Boards..
  • Beautiful Finish: 100% Double Anodized Aluminum..
  • Electronic Enclosure with Excellent Electromagnetic Shielding Performance..
  • Heavy gauge extruded aluminum construction made from 6063 T6 (HE9) Aluminum..
  • Applications: It is widely used in electronic, instrumentation, automation, communications, power supply units, student projects, amplifiers, Medical and wellness devices, test and measurement equipment..
Check Stock

Aluminum Enclosure Case, DIY Project Boxes for Electronic, DIY Aluminum Electronic Enclosure Box, 50 x 178 x 300mm, Good Heat Dissipation

  • ALUMINUM ALLOY PROJECTOR BOX - Made of high quality aluminum alloy material, durable and long service life..
  • DIY ENCLOSURE CASE - Adopt split type design, you can assemble and design the box you want by yourself..
  • PREMIUM QUALITY - Surface sandblasting and brushed treatment, wear resistant and beautiful, comfortable hand feeling..
  • HIGH PERFORMANCE - Good heat dissipation and excellent electromagnetic shielding performance..
  • WIDE RANGE OF APPLICATION - Used for heat-dissipating aluminum casing of electronic products, printed circuit board wiring aluminum box, DIY, etc..
Check Stock

Tysun Silver Aluminum Project Box for Electronics, Electronics Box Project Enclosure 9.84'x 8.07'x 3.94' / 250 x 205 x 100mm (LWH)

  • ★【Well Made Project Box】Professional sandblast, matte anodized finish, heavy gauge extruded aluminum construction..
  • ★【Electronics Enclosure Dimension】Color: Silver Gray, Size of box: 9.84"x 8.07"x 3.94" / 250 x 205 x 100mm (LWH)..
  • ★【Structure】Front and back panels and fasteners are included for PCB Boards, easy to take apart for two halves and installation..
  • ★【High Quality Electronics Box】Excellent electromagnetic shielding performance, good heat dissipation..
  • ★【Wide Applications】Aluminum project box is widely used in electronic, instrumentation, automation, communications, power supply units, student projects, amplifiers, medical and wellness devices, test and measurement equipment..
Check Stock

Recaceik Cat Litter Box Enclosure with Cat Tree, Hidden Cat Washroom Furniture with Divider, Wooden Cat House with Platform, Scratching Post and Soft Plush Perch, Indoor Pet Cabinet,Rustic Brown

  • Multi-Function Cat Litter Box Enclosure: The Recaceik litter box enclosure is a combination of a cat house and a cat tree. The two functions combined into one wooden house on the bottom is an ideal place to place a cat mat or litter box, while a rest stop and plush ball on the top provide a space for your cat to relax and entertain while saving more space in your house..
  • Suitable For Most Litter Boxes: The inside of the outside of our cat litter box enclosure is 21.25"L x 18.11"W x 16.33"H (with divider), you only need to buy a litter box smaller than this size, and the outside of our cat litter box enclosure can be placed without litter falling. If you want to turn this cabinet into a cat's nest, you can remove the center divider so that the internal dimensions become 27.16"L x 18.11"W x 16.33"H, and you can place a cat's nest of the same size..
  • Easy Clean & Reduce Litter Odor: This stylish Cat Litter Box Enclosure provides cats with a private, clean and comfortable cat toilet. A litter box on one side and a divider on the other enclosure that your cat doesn't litter out of the litter box, and helps you get rid of the lingering smell and no litter lying around. Double cabinet doors and locks make daily cleaning and cat care effortless..
Check Stock

LeMotech Project Box ABS Plastic IP65 Waterproof Dustproof Electrical Junction Box Outdoor Enclosure for Electronics Black 7.87 x 4.72 x 2.95 inch (200 x 120 x 75 mm)

  • Ideal for electronic projects, instrument enclosure, power supply units, temperature controller box, etc.
  • Material: ABS ,which is durable and practical.
  • External Size of the project box : 7.87" x 4.72" x 2.95"/200 x 120 x 75mm(L*W*H) ,Internal Size of the project box : 7.6" x 4.45" x 2.67"(193 x 113 x 68mm)(L*W*H)- - *Tips: in order to confirm the detailed installation dimensions, please refer to our detail image, which shows specific internal dimensions of the product. (Allowable Error: 2mm) ，Thickness: 0.12in/3mm.
  • Package Content: 1 x Junction Box, 1 x Rubber Grommet ,4 x Screws(Not Rustproof).
Check Stock

BUD Industries JBH-4961-KO Steel NEMA 1 Sheet Metal Box 6 L x 10 W, Gray

  • 【Specifications】Product name: Electrical Box.
  • 【Product Size】Outer Size of enclosure box (Approx.): 5.91"x5.91"x3.54"(150mmx150mmx90mm)(L*W*H).
  • Inner Size of enclosure box(Approx.): 5.16" x 5.16" x 3.27"/131 x 131 x 83mm(L*W*H)- - (Allowable Error: ±2mm)..
  • 【Industrial Electrical Box】: electrical unit is not only weather resistant but also waterproof and does not allow dust to enter. You can drill holes inside depending upon your project requirement with no cracks and compromise.
  • 【Easy to operate】: electrical unit is easy to install, Hinged enclosure makes the opening and closing easier.
  • For the internal mounting, industrial enclosure features an mounting bosses,more convenient for your project..
  • 【Comprehensive Industrial Enclosure】: The junction box features two or three plastic latches for added security and locking. Moisture proof, sunscreen, anti-corrosion for safety from weather based environmental hazards.
Check Stock

Otdorpatio 2 Pack Project Box IP65 Waterproof Junction Box ABS Plastic Black Electrical Boxes DIY Electronic Project Case Power Enclosure 3.94x2.68x1.97 inch 100 x 68 x50 mm

  • 【Size】- Outer size of the project box: 3.94"x2.68"x1.97"(100 x 68 x50 mm).
  • Inner size of the project box:3.66" x2.4" x 1.73" (93 x61 x44mm).
  • 【Superior Electrical Safety】– IP65 Rated Indoor & Outdoor Waterproof Junction Box protect against dust, corrosion and splashing water, helps....
  • 【Superior Durable】- Made of high-quality ABS material that offers outstanding impact resistant and electrical insulation, Moisture-proof,....
  • 【Easy for DIY】- This sturdy junction box can be drilled and shaped easily without cracking, so it’s also suitable for your various DIY projects..
  • 【Wild Application】Widely used for electronic projects, instrument enclosure, power supply units, temperature controller box, etc.****Package....
Check Stock

Otdorpatio Project Box ABS Plastic Black Electrical Boxes IP65 Waterproof DIY Electronic Junction Box Power Enclosure 7.87 x4.72 x2.95 inch (200x120x75 mm)

  • 【Size】- Outer size of the project box: 7.87"x 4.72"x2.95"(200 x 120 x75 mm).
  • Inner size of the project box:7.59" x4.4" x 2.67" (192 x112 x68mm).
  • 【Superior Electrical Safety】– IP65 Rated Indoor & Outdoor Waterproof Junction Box protect against dust, corrosion and splashing water, helps keep all your home electrical equipment Clean & Dry..
  • 【Superior Durable】- Made of high-quality ABS material that offers outstanding impact resistant and electrical insulation, Moisture-proof, sunscreen, anti-corrosion, durable for years use. can keep your equipment well-protected in harsh environments..
  • 【Easy for DIY】- This sturdy junction box can be drilled and shaped easily without cracking, so it’s also suitable for your various DIY projects..
  • 【Wild Application】Widely used for electronic projects, instrument enclosure, power supply units, temperature controller box, etc.****Package Content : 1xWaterproof Junction Box****.
Check Stock

Altelix Vented NEMA Enclosure 17x14x6 (11.5

  • Durable Commercial Grade Polycarbonate + ABS NEMA Box with Reinforced Hinges, Dual Latches, Tamper-Proof Locking Screw and Provision for Padlock. IP24 Rated.
  • Dual 3.5" Vents with Rain Shields to Expel Heat. NEMA Type 3R, 3RX / IP24 Rated..
  • Inside Space for Equipment Up to 11.5" x 9" x 4.1" Max. Outside Dimensions: 16.5 x 12.5 x 5.3 Inches..
  • Plug-and-Play Enclosure. Includes pre-wired 120 VAC outlets and 5 foot 3-prong power cord..
  • Ideal for Protecting Wi-Fi Equipment, Security and Surveillance Equipment, Concealment of Electronic Devices, Industrial Automation, Warehouses, Public Areas as well as ideal for Rapid Deployment Systems..
Check Stock