Categories

Best Electronic Module

Electric Skateboard ESC Kit, 10S 36V Single Drive ESC Substitute Control Mainboard with Remote for DIY Electric Skateboard Longboard

  • Made of high quality chip and electronic components, single drive design can offer excellent and stable performance..
  • The solid structure of mainboard can greatly lengthen the service life. With remote receiver module, so it supports remote control..
  • The well-organized circuit board is easy to install, but needs professional skills..
  • This electric longboard skateboard control system has EMP control module with remote module, it can do as ESC do..
  • With over-voltage, under-voltage, overheating, over-current​ protection, safe and reliable to use, supports speed control, easy to use. With a LED indicator that displays signal status, speed modes, battery percentage..
Check Stock

FOXWELL NT530 for BMW Multi-System OBD2 Diagnostic Scanner Read Erase Error Codes

  • Upgraded version of the NT520 PRO scanner with improved hardware. Compatible with both OBDI and OBDII vehicles.
  • Service Features: Battery Reset, Injector Coding, TPMS, SRS, EPB, Brake Deactivation, Service Reset, Steering Angle Sensor (SAS) Calibration, DPF Regeneration, ABS Bleeding, BCM/SIR Setup, TPS/TBA (Throttle Body Alignment), etc..
  • Multi-System Diagnosis: Engine, Automatic Transmission, ABS, Airbag, Immobilizer, Climate Control, Fuel Pump Control Module, Fuel Injection Control Module, All-Wheel Drive Control, VG transfer case Module, Electronic Selector Module, Body Control Module, Digital Radio, Standard Radio, Drivers Door Module, HVAC, Instrument Cluster, Seat Memory Module, Theft Deterrent, Amplifier, Central Gateway, Immobilizer, etc..
  • Advanced functions such as Actuation, Adaption and Programming.
  • Expandable up to 5 car brands – Free Online Updates. One year warranty..
Check Stock

FOXWELL NT530 for Volvo Multi-System OBD2 Diagnostic Scanner Read Erase Error Codes

  • Upgraded version of the NT520 PRO scanner with improved hardware. Compatible with both OBDI and OBDII vehicles.
  • Service Features: Battery Reset, Injector Coding, TPMS, SRS, EPB, Brake Deactivation, Service Reset, Steering Angle Sensor (SAS) Calibration, DPF Regeneration, ABS Bleeding, BCM/SIR Setup, TPS/TBA (Throttle Body Alignment), etc..
  • Multi-System Diagnosis: Engine, Automatic Transmission, ABS, Airbag, Immobilizer, Climate Control, Fuel Pump Control Module, Fuel Injection Control Module, All-Wheel Drive Control, VG transfer case Module, Electronic Selector Module, Body Control Module, Digital Radio, Standard Radio, Drivers Door Module, HVAC, Instrument Cluster, Seat Memory Module, Theft Deterrent, Amplifier, Central Gateway, Immobilizer, etc..
  • Advanced functions such as Actuation, Adaption and Programming.
  • Expandable up to 5 car brands - Free Online Updates. One year warranty..
Check Stock

ELECROW Sensor Kit Compatible with Arduino, Crowtail Programming Learning Kit, Coding Electronics Kit for Programming Beginner (Basic)

  • Crowtail is composed of a series of open source electronic sensor modules. Each electronic module is composed of a circuit board with integrated sensors and a standard 4 pin connection terminal. This Crowtail starter kit compatible with Arduino is a perfect Kit for beginners to get started in a fun and easy way..
  • This kit includes 20 instructive tutorials, step by step to walk you through the basic of the electronic modules, exercise your logical thinking..
  • This kit contains 22 electronic modules that includes Crowtail-Base Shield and Crowduino Uno SD, each module has its own feature and functions. They are well selected for beginners, and is ideal for introductory learning and inspiration..
  • Whether you are a student, teacher, hardware enthusiast, with the help of this kit, you can quickly master the basic programming knowledge through this starter kit..
  • Well-designed packaged, soft internal slot structure with clasp, protecting and settling the modules very well..
Check Stock

onlyfire Universal Fit 4-Spark Electronic Push Button Igniter Kit for Char-Broil Most Grills, Black

  • 4-spark, heat-resistant universal fit electronic grill ignition replacement kit with multiple wires..
  • Highly durable ignition module, switch, button, and wires. Requires 1 AA battery (not included)..
  • Includes ignition module with push button, igniter wire for side burner, igniter wire and ground wire..
  • Replaces electronic igniters on most grills with up to 4 sparks..
  • Ignition housing keeps igniter working under all conditions..
Check Stock

20 Pieces 3 Pins AMS1117-3.3 DC 4.75V-12V to 3.3V Voltage Regulator Down Power Supply Buck 800mA Module

  • ...nel design and the input output using the 3 pin single row pin for easy connection, the input voltage is higher than output voltage 1.2V, the module will work normally.
  • AMS1117-3.3 is a positive voltage regulator step down power supply module, support DC 4.75-12V input and 3.3V fixed voltage and 0.8A current output.
  • Electronic devices partner: the 3 pins AMS1117-3.3 voltage regulator mini step down power supply module, can be applied to electronic devices which need 3.3V power supply, such as SCM project design, MCU development and more, easy to be connected and provide the power supply.
  • Where to use: the voltage to 3.3V 800mA DC buck module is applicable for high-efficiency linear regulator published active power regulator battery charger active instrument.
  • Compatible with: the 3 pins AMS1117-3.3 voltage regulator mini power supply is compatible with Arduino MEGA2560, MSP430 development board, 3.3V low power consumption MCU, FPGA/CPLD PLD programmable logic systems, ARM7 ARM9 ARM11 STM32, etc..
  • Provide more safety: the AMS1117-3.3 800mA DC buck module features overheat shutdown circuit provides overload and over-temperature protection, no worry about safety and bring you more convenience.
  • Operating junction temperature range: -40 to 125°C, welding....
Check Stock

Basic 16x2 Character LCD - RGB Backlight 5V

  • DRIVER IC: The module driver IC is for AIP650 (compatible for TM650), as well as supports multiple display characters..
  • 4 DIGIT 7 SEGMENT: The digital tube display module is designed for 4 digit 7 segment, with stable and reliable performance..
  • CONTROL INTERFACE: With 4 pins, SDA is bidirectional data line, SCL is clock line, GND is for ground line, and VCC is power supply..
  • COMPACT STRUCTURE: The LED digital tube module is exquisite and compact, which can be flexibly used in a variety of situations..
  • WIDE APPLICATION: This module is suitable for Raspberry Pi 3 B+ 4, for DIY electronic devices, toy cars and instrumentation etc..
Check Stock

TEKONSHA 90885 / Tekonsha Prodigy P2 Electronic Brake Control f/1-4 Axle Trailers - Proportional

  • Ram 1500 2500 3500 4500 5500 Electronic Integrated Trailer Brake Controller Module with Switch. Part# 82215040AC, 82215040AB, 82215040, 68105206AC, 68105206AB.
  • Replacement for 2016-2021 Dodge Ram 1500.
  • Warranty for 12 Months! Adopt high-end chips to provide fast braking with positive response, and the performance is at least 50% higher than other similar parts..
  • Integrated Trailer Brake Control Module allows driver to automatically or manually activate the electronic brakes on properly equipped trailers for greater stopping power on downhill grades. The controller and status display are mounted in the dashboard to the left of the steering wheel, and the included control lever can activate the trailer brakes independent of the truck's brakes. Drivers can customize the amount of brake force the trailer uses, depending on load requirements..
  • It is necessary to check if the vehicle has both trailer brake module connectors. These connectors are located under left side of the steering column. Both connecters are 4 pin connectors. If both connecters are not present the ITBM kit cannot be added to the vehicle..
Check Stock

4-Digit 7-Segment LED Display Clock Module with TM1637 IC Compatible with Raspberry Pi Arduino (Blue LEDs)

  • [Specifications] This is a basic 4-digit 7-segment Led display clock module, the LEDs are blue..
  • [Compatibility] This clock module uses TM1637 IC, it compatible with Raspberry Pi and Arduino.
  • [Easy to Use] The clock module connected to digital I/O via 2 pins..
  • [Easy to Install] This LED display designed with 4 mounting holes for easy installation..
  • [High Quality] The clock module is made of high quality electronic components, stable and reliable performance.
Check Stock

Key Display for AVR 8-Bit Digital LED Tube 8-Bit TM1638 Module

  • DRIVER IC: The module driver IC is for AIP650 (compatible for TM650), as well as supports multiple display characters..
  • 4 DIGIT 7 SEGMENT: The digital tube display module is designed for 4 digit 7 segment, with stable and reliable performance..
  • CONTROL INTERFACE: With 4 pins, SDA is bidirectional data line, SCL is clock line, GND is for ground line, and VCC is power supply..
  • COMPACT STRUCTURE: The LED digital tube module is exquisite and compact, which can be flexibly used in a variety of situations..
  • WIDE APPLICATION: This module is suitable for 3 B+ 4, for DIY electronic devices, toy cars and instrumentation etc..
Check Stock

REXQualis Complete Starter Kit Compatible with Arduino IDE and Electronics Component Fun Kit

  • REXQualis complete starter kit base on Arduino UNO R3 comes with more than 200pcs components, 67 kinds of components and sensors module..
  • Include High Quality Base Board base on Arduino UNO R3 and Sensors, 100% compatible with Arduino IDE..
  • LCD1602 Module，MPU-6050 Module and RC522 RFID Module come with pin header, Motors come with wires, not need to solder by yourself..
  • REXQualis Electronics Component Fun Kit is a Highest Cost Components Kit, It comes with more than 400pcs sensors and components for fun and simple electronic projects..
  • Datasheet and Tutorial are available to download from our official website or you can contact our customer service..
Check Stock

Delta Children Newborn Soothing Sleeper Bassinet - Portable Baby Crib with Compact Fold, Grey Infinity

  • AIRFLOW MESH: Mesh sides provide increased airflow for baby’s comfort and visibility for mom.
  • CALMING FEATURES: Features an electronic module that has lights, sounds and soothing vibrations | Electronic module requires 4 AA batteries (not included).
  • COMPACT FOLD: Compact fold makes storing and traveling with the easy.
  • SAFE OPTION: This bassinet is JPMA certified to meet or exceed all safety standards set by ASTM | Recommended for babies up to 30 lbs..
  • MORE INFO: Assembled Dimensions: 31.69”L x 26.77”W x 22.44”H | Weighs 12.3 lbs. | Small footprint makes it a great for room-sharing | Includes a fitted sheet and a 1" water-resistant mattress pad.
Check Stock

KEYESTUDIO Robot Arm Starter Kit for Arduino Coding Robotics Kit for Adults Teens 15+ Electronic Programming Project STEM Education

  • This is a robot arm kit suitable for electronic programming enthusiasts over 12 years old. If users have the theoretical basis of electronic programming, they can quickly master it. If you are interested in the working principle of the robot arm, this kit is a very good choice..
  • There are 3 controlling methods as follows: 1) Controlling through Wired JoyStick (included in the kit).
  • 3) Wireless PS2 JoyStick Control (Not Includes PS2 JoyStick module,but provides with the code).
  • We are responsible for product quality, and we are responsible for the quality of all electronic components in the kit. If you encounter any problems during use, please feel free to contact me. We provide timely technical support response services..
  • The robot arm kit contains a HC-06 Bluetooth module, which can control the robot arm through the mobile phone Bluetooth APP. (Only supports Android phones). Please NOTE : the battery is not included in the kit, please prepare it yourself..
Check Stock