Anfukone T92P7A22-240 Power Relay, DPST-NO, 240VAC, 30A, Panel

  • It is perfect used in the remote control, communication, automatic control system, electronic equipment's..
  • Relay contacts : 003cbr003e Terminals 1 and 8 public points ;003cbr003e Terminals 2 and 7 Relay Coil Voltage.
  • 003cbr003e Terminals 3 and 6 N/O Normally Open.
  • 003cbr003e Terminals 4 and 5 N/C Normally Closed.
  • Total Size (Approx. ): 1. 4" x 1. 4" x 2. 6".
  • 003cbr003ePackage : 1 x Power Relay & Socket..
Check Stock

HELLA 007793031 with Coil Suppression Power Relay 4 Pin, Mini ISO

  • HELLA electric / electronic solutions provide crucial help in making driving safer, more efficient and more comfortable. HELLA also supports the trend of electric driving with an extensive product portfolio for all development stages of electrification..
  • HELLA relays are meant to do their job reliably for a long time because perfection and durability is one of our strengths right down to the smallest detail. HELLA offers reliable products and one of the widest ranges in the industry..
  • Automotive standard 12 volt, 4 pin Mini ISO Power relay for typical installation in vehicle relay / fuse boxes..
  • The relay is able to switch and carry 50 amps at elevated ambient temperatures or up to 70 amps at less severe conditions (ie. Low ambient temperatures or short ON durations)..
  • Relay includes resistor coil suppression which makes this relay an ideal OE replacement option..
Check Stock

2pcs LED Flasher Relay 2 Pin,12V Relay with Harness for Motorcycle LED Flash Turn Signal Control Relays

  • 【High Quality】ZSSElec 12 volt relay is made of durable high-quality materials (ABS plastic, sturdy copper wire, and metal),copper wires can....
  • 【Easy to Install】Just need to connect turn signal flasher relay 2 pins to the battery. No tools are required. (NOTE: if the wiring connectors are....
  • 【Flasher Relay for LED Turn Signal】ZSSElec electronic turn signal flasher relay help control the flash rate of the lights on your motorcycles,....
  • 【Motorcycle Flasher Relays】Automotive replacement flashers compatible for most bike scooter, motorcycle,such as such as Honda, Kawasaki, Suzuki,....
  • 【Packing】2pcs 12V 2pin LED flasher relay to meet your demands..
Check Stock

2 Pieces 2 Pin LED Flasher Relay Motorcycle Turn Signal Flasher Relay Electronic Flash Rate Control Flasher Bike Scooter

  • What you will get: the electronic led flasher relay fix set include 2 pieces of led flasher relay fix tools, which can be enough to meet your using....
  • Quality material: the flash rate control relay fix tools are made of durable plastic and sturdy copper wire.
  • The durable plastic doesn't break easily....
  • Stable performance: the motorcycle led turn signal bulbs flash relay can control the flash rate of the lights on your motorcycles, improving lights'....
  • Convenient to install: the turn signal led lamp hyper flash relays are designed with 2 pins and 2 pieces of copper wires, which can save a lot of....
  • Wide range of applications: the turn signal led lamp hyper flash relay is designed with the model of LF1-S-PIN, which makes it compatible with most....
Check Stock

12V Speed Adjustable 2 Pin LED Electronic Flasher Relay for Motorcycle Turn Signal Direct Replacement Universal Hazard Warn Hyper Flash Relay Black,2pcs

  • 【SPEED ADJUSTABLE】This LED flasher relay fixes motorcycle turn signal hyper flash, allow LED light to blink at the normal rate, Clockwise:SLOWER ,....
  • 【APPLICATION】This 2-Pin Electronic Led Flasher Relay fit for most motorcycle/bike to fix the LED bulbs related turn signal light flashing, not....
  • 【SPECIFICATION】Blinker Relay 2 Pin. Operating Voltage: 12V (11V-15V). Max Power: 42W. Switch Power: 0.02A to 12A. Working Temperature: -40°C to....
  • 【PLUG AND PLAY】This Turn Signal Flasher Relay is plug-and-play. Work to directly replace Most Standard Factory 2-Pin Flasher. Eliminate the need....
  • 【PACKAGE INCLUDED】2PCS Black adjustable 2 Pin motorcycle flasher relay for LED turn signal..
Check Stock

2-Pin Electronic LED Flasher Relay,RDBS 12V LED Heavy Duty 2 Pin Compatible Automobile Motorcycle Bike Fix Turn Signal Bulbs Fast Hyper Flash,2 Prong Flasher Relay

  • This is a heavy duty 2 pin 12V LED electronic signal flasher (blinker) relay that is a plug and play design. No extra wiring or modifications are....
  • Our led flasher relay retain the reliability of an flasher along with staying extra cool, consuming very little power and extra long lasting life..
  • Our 2 pin 12 volt round led flasher relay work for Most Automotive/Motorcycle/Bike to fix the rapid flashing turn signal or prevent weak or no....
  • Our no load digital flasher relay Works with regular bulbs, and some LEDs.
  • Our two prong led flasher relay Product Dimension:2.3 x 1.4 x 1.3 inches . MAX 20 AMPS & Voltage: 12 volts.
Check Stock

CHAUVET DJ LED Lighting Silver DMX-4

  • Each Channel can be set as either dimmer or relay and can be set to any DMX address.
  • Adjustable speed control and dimming with or without DMX.
Check Stock

Inkbird SSR Solid State Relay SSR 40DA for PID Thermostat Temperature Controller

  • Model No.: SSR-80DA;If you want to reach 80A, you need to add a large heat sink and fan.
  • output Voltage : 24-480vac;Special attention:This relay cannot be used for more than 30A for a long time.If that actual use current exceeds 15A,It is necessary to separately configure the heat sink..
  • Total size (approximate) : 58 x 45 x 32Mm/2.3" x 1.8" x 1.26" (l*w*t).
  • material : metal, plastic, electronic parts.
Check Stock

Automotive Heating and Air Conditioning (Pearson Automotive Series)

  • Price For: Each Item: Hard Start Kit Application: For Use on Residential and Commercial Air Conditioning Units, Heat Pumps and Room Air Conditioners, Provide Additional Starting Torque to all Single Phase 115 thru 288 Volt Units Includes: Lead Wires, Electronic Potential Relay (EPR), 330 V Capacitor Type: Relay and Start Capacitor Voltage: 90-277 HP: 1/2 to 10 Increased Torque (Oz.-In.): 300.
  • Country of Origin (subject to change): China.
Check Stock

Dorhea ESP8266 ESP-12 NodeMcu D1 Module WeMos Lua 4M Bytes WLAN WiFi Internet Development Board + Relay Shield + 2.54mm 40Pin Single Row Male Pin Header - 3Set

  • The esp8266 module is 11 digital input / output pins, all pins with interrupt / PWM / I2C / support 1 line (except D0).
  • 1 analog input(3.2V max input). Micro USB connection.
  • WiFi internet development board 5V 1A switching power supply (switching power supply)onboard..
  • 5V relay shield is a digital switch to control much higher voltages and currents than esp8266 mini microcontroller, controlled by the D1 , the relay will switch to allow current to flow or turn off, depending on wiring..
  • 40 pin 0.1inch (2.54mm) male pin header connector PCB board pin strip electronic component, they are easy to be cut to any length if needed, you can cut or score with some electronic tool..
  • The pin header is an ideal connector for the PCB board and intergrated circuit, used widely in the computer and breadboard, compatible with raspberry pi or other electronic project..
Check Stock

AUTOVIC Starter Solenoid Repair Kits

  • ☞Fitment: For 4-Stroke GY6 Engine 50cc 70 cc 90cc 110 cc 150cc 200cc 250cc ATV Dirt Bikes Scooters Go Kart Dne Buggys Quad 4 Wheelers Pit Bike Moped Roketa SSR Taotao Sunl Coolster.
  • ☞Material: Made of high quality copper and rubber material, efficient and durable.
  • ☞Function: Solenoid starter relay is used for electronic applications to turn on / off most device, reduce startup switch electric current.
  • ☞Great replacement: Reliable replacement electrical parts, direct plug-in, perfect replacement.
  • ☞Package Included: 1pc solenoid relay (Have as a 2 wire 2 pin male connector end).
Check Stock

Twidec/Output Single Phase SSR Solid State Relay 80A 3-32V DC to 24-480V AC SSR-80DA

  • Model No.: SSR-80DA;If you want to reach 80A, you need to add a large heat sink and fan.
  • output Voltage : 24-480vac;Special attention:This relay cannot be used for more than 30A for a long time.If that actual use current exceeds 15A,It is necessary to separately configure the heat sink..
  • Total size (approximate) : 58 x 45 x 32Mm/2.3" x 1.8" x 1.26" (l*w*t).
  • material : metal, plastic, electronic parts.
Check Stock

Solid State Relay SSR-40AA 40A AC to AC Input 80-250V AC and Output 24-380V AC (SSR-40 AA)

Check Stock