Categories

Best Emergency Brake Handle Removal Tool

YSTOOL Pneumatic Brake Caliper Piston Wind Back Compression Spreading Tool 23PCS Kit Rewind Spreader Air Tool Set to Repair Brake Pad Change Brake Pump for Cars Trucks

  • ...eo, Honda, Range Rover, Jetta, Jaguar, Subaru, Mazda, Mercedes, Mitsubishi, Nissan, Renault, Saab, Iveco, Toyota, Volvo, VW, etc. Just choose one adapter, connect the brake piston caliper tool to shop air, press air trigger(til the end) and rotate swivel rod to rewind brake piston, then release pressure before tool removal by pressing air release button..
  • Compared with manual brake caliper spreading tool, pneumatic brake caliper tool is more laborsaving, convenient and environment-friendly. Only one tool is needed to satisfy for use with left and right hand threaded pistons by rotating the long swivel handle freely, no need to gather two sets of left and right hand thrust bolt assemblies and waste time to try which one is right. YSTOOL caliper piston rewind tool is equipped with 1/4" American air plug (114psi max working pressure)..
  • Brake caliper compression tool features pneumatic aluminium alloy cylinder, airtight and efficient brake pad caliper tool. The surface is electroplated and painted to avoid corrosion and rust. Magnetic plate can quickly attach the adapters. Pressure releases at the touch of air release button. 22PCS adapters use carbon steel material with corrosion and low temperature resistance, durable and safe. Models are etched on the a....
Check Stock

Orion Motor Tech 21PCS Master Ball Joint Press | Upper and Lower Ball Joint Removal Tool | Automotive Mechanic Tool Set

  • ESSENTIAL TOOL FOR BALL JOINT SERVICE - Use the ORION MOTOR TECH 22PCS Ball Joint Press Set Ball Joint Tool / Bushing Removal Tool with multi-size adapter to effortlessly remove press fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive (2WD) and 4-wheel drive (4WD) vehicles without removing the control arm from the vehicle..
  • UNIVERSALLY COMPATIBLE WITH A WIDE RANGE OF VEHICLES - Use the ORION MOTOR TECH Ball Joint Press Set Ball Joint Tool / Bushing Removal Tool with all the receiver tubes and removing/installing adapters needed to effortlessly remove press fit parts including ball joints, U-joints, brake anchor pins, and more on most GM, Chevy, Ford, and Dodge 2 and 4 wheel drive pickups, vans and sport utility vehicles, will service perfect for vehicles having the Dana 28, 30, 35, 44, 60 axle.
  • PROFESSIONAL GRADE QUALITY AND DURABILITY - Off road weekend warriors, novices, and professional mechanics trust the ORION kit because ORION MOTOR TECH sources the highest quality components from around the world. Constructed from heavy-duty forged solid carbon steel with anti-rust black-oxide finish on adapters for maximum strength and longevity that resists rust and corrosion..
  • CONVENIENTLY ORGANIZED IN CUSTOM MOLD....
Check Stock

Kauplus Brake Service Kit, 14-Piece Professional Drum Brake Tool Set w/Brake Lining Gauge…

  • Idea for servicing drum brakes on most of import and domestic vehicles adjustment, installation and removal application.
  • Various of TPR grip Brake Spring tool, each of spring compressor, brake spring installer, spring removal tool and brake retaining.
  • Tri-function Brake spring pliers removes and replaces shoe return springs of drum brakes effectively.
  • 14 pcs Brake Service Kit all the contains Made in Taiwan, comes in an organizer tray, with Brake Lining Gauge, identifies thickness level ranges for brake lining inspection to be used on most foreign and domestic cars and trucks.
Check Stock

ABN Universal Drum Brake Puller 8-Piece Set with Carrying Case – Master Removal Tool Kit for Automotive Drum Brakes

  • Practical: Use the ABN Universal Drum Brake Puller 8-Piece Set with Carrying Case – Master Removal Tool Kit for Automotive Drum Brakes to service....
  • Durable: Constructed from heat-treated metal that is plated with chrome for strength and longevity.
  • Comfortable Grip: Molded and textured tool handles are a larger size for a secure grip and less user fatigue.
  • Easy Storage: Heavy-duty 14.8” x 2.3” x 10.5” (37.6cm x 5.8cm x 26.7cm) blow-molded plastic carry case for easy transportation, simple storage,....
  • Contents: Package includes (1) spring compressor + (1) brake spring installer + (1) spring removal tool + (1) brake retaining spring tool + (1) brake....
Check Stock

Oumers Bike Cassette Removal Tool, Cassette Freewheel Removal Tool with Chain Whip and Auxiliary Wrench Bicycle Cassette Lock Ring Removal, Freewheel Remover Wrench Sprocket Remover

  • This bike tool Kit combination cassette freewheel removal tool with chain whip and auxiliary wrench. All are in high quality, heat treated to prevent bending and flexing.
  • Designed to be used in conjunction with the cassette lock ring tool to remove cassettes from hubs. Sprocket Remover can also be used to tighten on screw-on freewheels. Caters for7, 8, 9 and 10 speed cassettes.
  • When remove flywheel, fixed wheel to prevent from damage. Silver color chain whip with orange non-slip coated handle for comfort and ease of use. It is constructed from steel for durability.
  • Freewheels Remover fits for any brand 12 teeth splined type freewheels cassette lockrings Cassette / Rotor Lockring Removal Tool Fits Shimano, SRAM, SunRace, SunTour, Chris King and other cassette lockrings. Also fits Shimano disc brake lockrings, stabilizes tool.
  • 100% Satisfaction Guarantee, Customer satisfaction is our greatest pursuit, we guarantee to provide our customer with best product &service. Any Cassette Removal Tool Set issues, we are very happy to either provide a Refund or a Replacement!.
Check Stock

DASBET 4 in1 Ball Joint Service Auto Tool Kit 2WD & 4WD Car Repair Remover Installer

  • Function: The ball joint press removal tool with four wheel drive adapter allows easy removal of crimped parts including ball joints, universal joints, brake fixing pins, etc. You don't need to remove the control arm from the vehicle at all during operation, improving work efficiency..
  • Durable Structure: The ball point press kit is made of heavy forged steel with black oxide finish adapters.The ball joint service auto tool kit has great strength and service life, while rust and corrosion resistant.And the ball joint separator tool can withstand long-term and massive use..
  • Easy to Operate: The ball joint service auto tool kit is ideal for removing/installing vehicle parts. You can remove all lock ring retainers from the brake anchor pins, then place the C-frame press on the brake spider, and tighten the forcing screws until the mounting pins are removed. .
  • Wide Compatibility: The ball joint press & U joint removal tool kit is suitable for most two wheel drive (2WD) and four whee....
Check Stock

Air Powered Brake Piston Wind Back Tool Pneumatic Brake Caliper Compression Tool Brake Caliper Piston Compressor Rewind Tool Brake Pump Adjusting Tool for Auto Repair

  • Professional Design: Brake caliper compression tool features anti slip knurled handle, exhaust button, pressure plate with rubber sleeve, magnetic head and inlet interface. Made of high carbon steel for durability..
  • Simple Operation: Use the brake compressor on left or right hand thread brake system wheel cylinder piston brake calipers (wind back calipers and some push back single piston calipers) with the 1/4inch air hose adapter to simplify brake jobs..
  • Brake Caliper Piston Tool: Use the ratcheting brake caliper compressor tool to compress pistons quickly and easily into the calipers.
  • Disc brake pad spreader tool creates a larger space between the caliper cavity to make room for newer and thicker brake pads..
  • Ratcheting Action: Brake piston compression tool provides 360 degree swing.
  • center located ratchet screw creates an even force when compressing the piston to ensure proper alignment and prevent damage to your brake assembly.
  • reverse movement by flipping the switch on the handle tool to retract the compression plate..
  • Easy Reset: Drain the fluids from calipers then remove the caliper and worn brake pads from your rotor assembly.
  • Retract brake caliper press plates to fit inside the caliper cavity.
  • Begin ratcheting slowly and steadily until the pisto....
Check Stock

Bike Cassette Removal Tool with Chain whip and Auxiliary Wrench Bicycle Sprocket Removal Tools Sprocket Remover …

  • Designed to be used in conjunction with the cassette lock ring tool to remove cassettes from hubs. Sprocket Remover can also be used to tighten on screw-on freewheels. Caters for 8, 9 and 10 speed cassettes. When remove flywheel, fixed wheel to prevent from damage. Silver color chain whip with orange non-slip coated handle for comfort and ease of use. It is constructed from steel for durability..
  • This Kit combination chain whip and auxiliary wrench. Both are in high quality.
  • It also features hardened pins to keep the chain in place and a comfortable handle..
  • Cassette/Rotor Lockring Tool with pin, Smart design make it fit two size wrench..
  • Cassette / Rotor Lockring Removal Tool Fits Shimano, SRAM, SunTour, Chris King and other cassette lockrings. Also fits Shimano disc brake lockrings, Guide pin stabilizes tool.
Check Stock

Johntruck 6980 Steel Heavy Duty Brake Drum & Rotor Puller Kit Repairing Tools for Brake Drums, Rotors, Drive Wheels, Gears, Flywheels and Pulleys & More Removal

  • 【Application】The Removal Kit is designed to handle large components such as brake drums, rotors, drive wheels, gears, flywheels and pulleys & More..
  • 【Superior Material】Made of High Strength Heat Treated Steel, the repairing tool kit is extremely durable and rugged, extending service life up to 5-10 times. Exquisitely produced by our professional machines，good corrosion, rust & wear resistance..
  • 【Must Have Tool】The 6980 Brake Drum and Rotor Puller tool can spread up to 12-3/4" with a reach of 5''. It can provide up to 7 tons of force to remove the brake drumsby the sturdy and stable frame. Easy and simple to use. One person can easily put the tool in place, even in places where it is almost impossible to insert the jaws.(Tips: Use a wrench and some greases to help will be better)..
  • 【Function】Use to remove stuck, rusted, frozen drums and rotors conveniently. Allows easy arm adjustment and the ability to do pulling work in tight spaces. The Nylon Strap is specially designed to fix the jaws in place for severely corroded and damaged drums, improving stability..
  • 【100% Satisfaction Guarantee】The Johntruck Team aims to provide you the best products and services. Support 30 days returns and 12 months warranty. Please feel free to conta....
Check Stock

CMTOOL Brake Spring Tool for Semi Trucks, 5081 S-Cam Air Brake Spring Tools Replace Brake Shoes, Heavy Duty Tractors and Semi Trailers Brake Spring Tool, Steel Construction Truck Air Brake Tools

  • ...it will not take up too much space in your toolbox..
  • 3.【Wear-Resistant and Corrosion-Resistant Semi Brake Tool】The heavy-duty semi brake spring tool is made of high-quality hard steel material, which has excellent performance of anti-wear and corrosion resistance and is durable..
  • 4.【Easy-to-use Air Brake Spring Removal Tool】No additional tools such as vices and screwdrivers are needed. Just hook the fixed spring ring and press down on the shaft. The semi trailer brake tools only take a few seconds to easily remove and install the shoe spring..
  • 5.【S Cam Brake Tool with "V" Structure】The semi truck tools with a "V"-shaped structure at the end makes full use of the principle of leverage. The Lever action on the axle makes the job easier. Leaning on the axle makes the separation of the spring ring and the brake shoe safer and easier..
Check Stock

OMT 2-in-1 Brake Tool Kit Drum Brake Tool Kit and Brake Caliper Compression Tool Drum Brake Tool for Drum Brake Repair and Adjustment Brake Caliper Wind Back Tool for Brake Pad Replacement Reset

  • DUAL BRAKE TOOL SET: This 30-piece brake kit from Orion Motor Tech includes all the necessary parts for adjustment, removal, and installation of dual brake vehicles. The 8 drum brake tools include a remover, installer, compressor, retainer, pliers, and standard, angled, and mini adjustment spoons. The 22 disc brake tools include 2 retaining plates, left and right thrust bolt assemblies, and 18 adapters..
  • NEAR UNIVERSAL COMPATIBILITY: this drum brake tool kit and caliper wind back tool kit covers hundreds of makes and models of cars and light trucks, whether import or domestic..
  • EASY OPERATION: Both the drum brake tool and disc brake caliper tool set offer reinforced ergonomic handles to save you time and spare you effort and aggravation during use. Everything is clearly labeled in the custom blow-molded carrying cases and included instructions..
  • PREMIUM MATERIAL: Each part is made of structural-grade steel for good ductility combined with outstanding strength, durability, and longevity. Black oxide and chrome coatings ensure superior long-lasting wear and corrosion resistance..
  • SATISFACTION GUARANTEED: Orion Motor Tech backs these brake drum tool kit and brake caliper wind back tool with our usual strong warranty and friendly 24/7 customer service, ensur....
Check Stock

United Pacific C496404 Door Window Handle Clip Removal Tool, Stamped Steel w/Zinc Plating, Spring Clip Removal, Window Handle Removal – One Unit

  • WHAT’S IN THE BOX: Included in the order is the following: (ONE) United Pacific Door Window Handle Clip Removal Tool. (NOTE: ONLY ONE DOOR WINDOW Handle Clip Removal Tool will be on order, if you need multiples, please order accordingly)..
  • FEATURES: The United Pacific Door Window Handle Clip Removal Tool was crafted with a highly durable stamped steel with zinc plating construction. Our UP Door Window Handle Removal tool is a simple, yet highly effective tool when dealing with removal of spring clips on the interior door window handle. This UP tool is ideal for jobs like reupholstery, stereo updates, changing out glass, updating electrical wiring or paint since you can pop the clips out without worrying about breakages..
  • APPLICATIONS: Our United Pacific Door Window Handle Clip Removal Tool is quite easy to use, and the simple design is highly effective. This is a perfect tool for someone who deals with a lot of removal of interior panels. The durable yet strong construction of our UP Door Window Handle Clip Removal Tool makes this a tool for every garage..
  • WHO WE ARE: We are unique individuals whose varied talents and experiences bring value to the way we connect with big rig drivers and car enthusiasts, and the world. With over 30 years of exper....
Check Stock

Orion Motor Tech 32pc Dual Brake Tools 2 in 1 Caliper Compression Tool and Drum Brake Tool Kit Brake Caliper Tool Kit and Drum Brake Tool with Brake Spring Tool Compressor Pliers Installer Remover

  • DUAL BRAKE TOOL SET: This 32-piece brake tool kit from Orion Motor Tech has all the tools for adjustment, removal, service, and installation of dual....
  • WIDE COMPATIBILITY: Altogether, this dual brake servicing kit covers hundreds of makes and models of cars and light trucks, both import and domestic,....
  • PREMIUM MATERIAL: Each tool is made of structural-grade steel for outstanding strength, durability, and longevity.
  • EASY OPERATION: Both the drum brake tool and the brake caliper tool offer reinforced ergonomic handles to save you time, effort, and aggravation....
  • BLOW-MOLDED CASES: The custom blow-molded carrying cases with their clear labeling and instruction manuals make these sets easy to use, organize,....
Check Stock