Categories

Best Emitter 3w

NTE Electronics MJ10012 Silicon NPN Power Darlington Transistor, 400V, 10 Amp

  • High DC Current Gain - hFE = 2500 (typ) @ IC = 4.0 Adc.
  • Collector-Emitter Sustaining Voltage @ 100 mA VCEO(sus) = 60 Vdc (Min) TIP120, TIP125.
  • Low Collector-Emitter Saturation Voltage VCE(sat) = 2.0 Vdc (Max) @ IC= 3.0 Adc = 4.0 Vdc (Max) @ IC= 5.0 Adc.
  • Monolithic Construction with Built-In Base-Emitter Shunt Resistors.
Check Stock

Hand Truck Nose Plate Extension, Steel, Load Capacity 200 lb.

  • For Use With :Fit No. 1W617, 2W063, 2W179, 3W041, 3W482, 3W484, 3W485, 5Z078, 5Z079, 6W856, 6W857, 6W858, 3W087, 3W481, 3W483".
Check Stock

IR Emitter Extender cable,2-eye transmitter 20-60Hz） cable length 10FT,support TV,DVD,CD DVR cable box set-top box etc.

  • COMPATIBLE:with Most IR Remote Controls. Tested to work with Amplifier, Cable Box, Stereo Receiver, Game Console, Satellite TV receiver, CD/DVD....
  • IR Emitter Mini Stick-On Infrared Emitters Blink Eye. This mini emitter Emits IR signal from modulator to AV component. It is designed to be installed....
  • Two Heads allow you to control multiple pieces of equipment with only one IR output.
  • For use with IR extender extension system, Xbox One, IR....
  • IR emitter extension cable with single eye that is compatible with devices in 38khz and 3.5mm port.
  • Installation is quick and easy. Simply connect the IR Emitter to your remote control extender and put the IR eyes inside the cabinet. By placing the....
Check Stock

Bridgold 20pcs TIP127 PNP BJT Transistors Darlington Bipolar Power Transistor 5A -100v 3Pins

  • Collector-Emitter Sustaining Voltage @ 100 mA VCEO(sus) = 100 Vdc (Min) TIP122, TIP127.
  • Low Collector-Emitter Saturation Voltage VCE(sat) = 2.0 Vdc (Max) @ IC= 3.0 Adc = 4.0 Vdc (Max) @ IC= 5.0 Adc.
  • High DC Current Gain - hFE = 2500 (typ) @ IC = 4.0 Adc.
  • Monolithic construction with built-in base-emitter shunt resistors.
Check Stock

Bridgold 10pcs TIP102 102 Bipolar BJT Single NPN Darlington Transistor 100 V/8 A,3-Pin TO-220

  • High DC Current Gain − hFE = 2500 (Typ) @ IC = 4.0 Adc.
  • Collector−Emitter Sustaining Voltage − @ 30 mAdc VCEO(sus) = 100 Vdc (Min) − TIP102, TIP107.
  • Monolithic Construction with Built−in Base−Emitter Shunt Resistors.
  • Low Collector−Emitter Saturation Voltage − VCE(sat) = 2.0 Vdc (Max) @ IC = 3.0 Adc = 2.5 Vdc (Max) @ IC = 8.0 Adc.
  • We have undergone rigorous testing and stable performance.
Check Stock

EasiBBQ Emitter Plates for Charbroil Grill 463242515, 463367016, 463242516, 466242515, 466242615, 463243016, 463367516, 466242516, 466242616, 463346017, Stainless Steel

  • Replacement for Charbroil Commercial Infrared 3 Burner 463242516, 463242515, 466242515, 466242615, 463243016, 463367516, 463367016, 466242516, 466242616, 463346017, 463246018..
  • Package includes 3 pack Premium Stainless Steel Emitter Plates. Easy to install and replace..
  • Dimensions: 17" x 8-1/16" per emitter. Make sure you measure the size of your original part and compare with ours before you order..
  • There are many holes in the surface of the Emitter Plate, the heat from the burner tube can be distributed better through the entire grill..
  • Improved the grilling by reduces flare-ups. It brings more flavorful food at a time..
Check Stock

SZBJ IR Emitter Extender Cable Extension 3.2 Feet - Dual Head 3.5mm Infrared Red Transmitter Pure Copper Wire Cord Compatible with IR Repeater Extender System Kit Xbox One 2 IR Emitter

  • Passes IR communication: Used with an IR Repeater kit or other electronics has emitter output to control a device.Adhesive backing allows the emitter....
  • 3.2 ft overall length of Infrared Emitter cable between the emitter heads and the mini-plug, extend remote control ability to any room any where in....
  • Control A/V component by the existing IR controller: such as amplifier, cable box, HD DVR, stereo receiver, Satellite TV receiver, CD player, DVD....
  • Easy to use : Sticks directly onto the AV equipment, and quad Heads allow you to control multiple pieces of equipment with only one IR output..
  • Plug into IR OUT port for use with IR extender extension system, Xbox One, IR Connecting Blocks and Home Automation controllers..
Check Stock

Cast Iron Grill Grate & Stainless Steel Emitter Plate Replacement Kit for Charbroil 463242516, 463242515, 466242515, 466242615, 463243016, 463367516, 463367016, 466242516, 466242616,463346017,3PCS Set

  • The cast iron grill grates and stainless steel grill emitters plates set fit Charbroil Commercial Infrared 3 Burner 463242516, 463242515, 466242515, 466242615, 463243016, 463367516, 463367016, 466242516, 466242616, 463346017, 463246018 perfectly..
  • The non-stick grates are made from sturdy cast iron which can prolong grill life expectancy and cast iron grates sit well on the stainless steel grill emitter plates for your charbroil grill.
  • Great replacement for original Char-Broil Infrared grates/emitters!.
  • Easy to clean and easy to install!The holes are drilled on the other side of the flame diffusers, so you can just flip it over to be almost exactly like the factory diffuser. The diffuser will work fine flipped over..
  • Specification: Material:Emitters are made from stamped stainless steel.
  • Cooking grill grid grates are made from sturdy matte enamel cast iron.
  • Package includes: 3-pack grill emitter plates and 3-pack grates.
  • Note: Please compare our cooking grates & emitter plate set with your original parts and check your original size before purchasing to avoid buying mistakes..
Check Stock

EasiBBQ Stainless Steel Cooking Grid for Charbroil 463242715 463242716 463276016 466242715 466242815 Gas Grill 3 Pack

  • Compatible with Char-Broil Commercial TRU-Infrared 463242715, 463242716, 463276016, 466242715, 466242716, 466242815, 466242816 Gas Grill. Compatible....
  • Compatible with Char-Broil Original Part Number: CHRG533-0009-W1, G5330009W1, G533-0009-W1, CHRG533-0009-W1A, G533-0009-W1A..
  • Package includes 3-pack Premium Stainless Steel Emitter Plates. Easy to install and replace..
  • Dimensions: 17" x 9 7/8" per emitter. Make sure you measure the size of your original parts and compare with ours before you order..
  • There are many holes in the surface of the Emitter Plate, the heat from the burner tube can be distributed better through the entire grill..
Check Stock

Grillflame G369-0030-W2 G469-0005-W1 Grill Grates Replacement Parts for Charbroil Grill 17 Inch 463642316 463644220 463632520 463632320 Tru Infrared Grill Parts Nexgrill 720-0864 720-0864M

  • ✅【MATCH THE CHARBROIL GRILL REPLACEMENT PARTS ORIGINAL MODEL NUMBER】 G469-0005-W1, G362-0008-W1A, G369-0030-W2, G362-0008-W1, working with charbroil tru infrared grill replacement parts G362-2100-W1, G460-0500-W1 (not included charbroil emitter ) g362-2100-w1 grate emitter infrared cast. char-broil signature tru-infrared 325 (g460-0500-w1 cooking grate,not included charbroil emitter , g362-2100-w1 emitter, g460-0500-w1, g362-2100-w1 grate emitter infrared cast).
  • ✅【SERVE CHARBROIL PERFORMANCE PARTS 2&3&4 BURNER GRILLS】 Serve charbroil commercial infrared grill 463642316, 466642316, 466642416, 463675016P1, 463675016, 748075, 1031880, 463245518, 463632320, 463632520, 463644220, 463246118, Lowes 700735, Signature 325. char-broil tru-infrared modular 463246118 parts, 463632320 charbroil infrared 2 burner grill cooking grates, char-broil commercial tru-infrared 463642316 item #748075 lowe’s, cast iron replacement grill grates for charbroil model 463642316.
  • ✅【FITS NEXGRILL EVOLUTION 2 BURNER GRILL GRATES HOME DEPOT】 720-0864, 720-0864M. Nexgrill replacement parts for nexgrill evolution 720-0864m home depot, nexgrill 720-0864m replacement parts, 720-0864m grate, grill parts kit compatible with nexgrill 720-0864m, nexgrill deluxe 2-burner pr....
Check Stock

Raindrip PC4050B Pressure Compensating Dripper, 50-Pack, Black

  • Flow rate remains constant in varying inlet water pressures and positions along length of tubing.
  • Ideal for watering individual shrubs and trees in landscapes, and plants in container pots and hanging baskets.
  • Fits ¼ in. tubing with internal diameter of 0.170 in. or punched hole with diameter of 0.170 in..
  • As part of a complete drip irrigation system, the pressure compensating emitter delivers the same amount of water no matter where they’re positioned on the line and at varying water pressures.
  • Self-cleaning emitter features a turbulent flow design that flushes out sediments to reduce clogging.
  • 1 GPH pressure-compensating emitters are designed to deliver a steady, uniform amount of water regardless of changes in pressure or length of tubing used.
  • Color coded for easy identification of flow rate: red – ½ GPH, ideal for heavy soil/clay areas.
  • black – 1 GPH, ideal for medium soil/loam.
Check Stock

BEADNOVA Irrigation Drippers 50pcs Drip Emitters for 1/4 Inch Irrigation Sprinkler 360 Degree Micro Sprinkler Adjustable Drip Irrigation Heads Drippers for Drip Irrigation Parts Garden Patio Lawn

  • PACKAGE INCLUDES: 50pcs drip emitter in length around 5.2 inches / 13cm. Each drip emitter has 8 outlet holes at the top which diameter is adjustable between 0.05 inch to 1.4mm approximately. Irrigation sprayer suitable for 4/7mm (inner/outer diameter) hose, or 1/4 inch tube. Color green..
  • STRONG MATERIAL: The drip emitter is made of high grade plastic which is strong and good for both indoor and outdoor use..
  • ADJUSTABLE WATER FLOW: By rotating the cap of the drip emitter, you can adjust water flow to meet your plants’ need..
  • NO TOOLS INSTALLATION: These drip emitters are suitable for 1/4 inch irrigation tube with 4mm inner diameter. To attach the hose, soak the end of hose in warm to hot water to let it soften before connecting. These irrigation sprayers insert easily to the ground. No tools required. Save time and water..
  • MINIMIZE WATER WASTE: Use irrigation sprayer to direct small quantities of water precisely where the plants need. These drip emitters are essential for watering system, drip system and sprinkle system in vegetable gardens, flower beds, greenhouse and pati....
Check Stock

NDS 430 Pop-Up Drainage Emitter with Elbow and Adapter for 3 in. & 4 in. Drain Pipes, works with drainage systems including catch basins, Green Plastic

  • RELEASE WATER AWAY FROM PROPERTY: Water captured in your drainage system needs a point of release.
  • and one of the best solutions for the job is the Pop-up Drainage Emitter.
  • HOW IT WORKS: The pop-up emitter works at a low point of the drainage system to discharge water collected from upstream and help protect property from water damage.
  • INSTALLATION: Connects to 3 in. & 4 in. single-wall corrugated and DWV/Sch. 40 pipes.
  • remove adapter to connect to 3 in. sewer & drain and triple-wall pipes.
  • Ensure cover flange is flush or slightly below adjacent turf to reduce potential for clipping cap with lawnmower.
  • UNIQUE ARCHITECTURE: The pop-up emitter cover consists of the pop-up cap and wide flange design that prevents turf overgrowth.
  • Underneath is an engineered crossbar design which helps maximize flow while flushing out debris.
  • Molded-in crossbar geometry along with internal ribs provide exceptional durability..
  • pops up as high as 1 in. once water pressure builds.
  • closes as flow diminishes. Flat profile design reduces....
Check Stock