Categories

Best Emotiva Channel Amplifier

LZSIG Home Audio Amplifier Stereo Receivers with Phono Inputs,Bluetooth,RMS 240W,2.1-CH FM for Power Amplifier Stereo System,UPG for Active Subwoofer,Turntable,Vinyl Record Player

  • 240 WATTS TOSHIBA POWER TUBE - LZSIG home stereo amplifier receiver is driven by 4 Toshiba large power tubes to achieve 120W(L) channel+120W(R) 2.1 channel combination. Frequency response range:20-15000Hz,signal-to-noise ratio is as high as 82dB. Recommended to match a pair of dual 6.5-inch to 10-inch floor-standing front passive speakers to amplify and enjoy your home audio experience in the comfort of your home.
  • UPGRADED VERSION for PHONOGRAPH - The sound amplification mixer device can perfect match the MM or MC type phonograph.When using the MC type, please press the rear switch button.Furthermore,this home audio receiver is compatible with vinyl record player, active subwoofer, passive bookshelf speaker, front speaker, surround speaker, outdoor speaker, smartphones, iPads, iPhones and computers, which is widely used in home audio, bedroom, conference, karaoke, bar, etc.
  • 2.1 channel design - In addition to the left and right stereo design, the dual-channel multifunction digital stereo amplifier receiver also adds a bass output channel to form a 2.1 channel stereo + subwoofer wall of sound effect with various active subwoofers, allowing you to enjoy extraordinary professional sound quality. With Auto FM radio, digital LED display, RCA line in and lin....
Check Stock

OSD Audio 6 Zone 12-Channel Digital Amplifier, 80W/Channel, Distributed Audio & Home Theater - MX1280

  • HIGH-PERFORMANCE AMPLIFIER: A slim yet robust multi-channel amplifier that supplies reliable power to up to six zones.
  • RESIDENTIAL/COMMERCIAL: Can be configured as the main amplifier for an audio distribution system or as an amplifier for 5.1 or 7.2 home theater systems.
  • AUDIOPHILE-LEVEL AMPLIFICATION: Delivers high-resolution music playback with 80 Watts per channel (1KHz into 4 Ohms), 50W Watts per channel (1KHz into 8 Ohms).
  • CLASS D EFFICIENCY: Uses Class D amplifier technology for low distortion and higher efficiency and special protection circuitry safeguards from thermal overload and short circuits.
  • SLIM DESIGN: Includes front-panel status indicators and slim form factor that is 2U rack-mountable (hardware included).
Check Stock

OSD Audio 4 Zone 8-Channel Digital Amplifier, 80W/Channel, Distributed Audio & Home Theater – MX880

  • HIGH-PERFORMANCE AMPLIFIER: A slim yet robust multi-channel amplifier that supplies reliable power to up to four zones.
  • RESIDENTIAL/COMMERCIAL: Can be configured as the main amplifier for an audio distribution system or as an amplifier for 5.1 or 7.2 home theater systems.
  • AUDIOPHILE-LEVEL AMPLIFICATION: Delivers high-resolution music playback with 80 Watts per channel (1KHz into 4 Ohms), 50W Watts per channel (1KHz into 8 Ohms).
  • CLASS D EFFICIENCY: Uses Class D amplifier technology for low distortion and higher efficiency and special protection circuitry safeguards from thermal overload and short circuits.
  • SLIM DESIGN: Includes front-panel status indicators and slim form factor that is 2U rack-mountable (hardware included).
Check Stock

Blaupunkt AMP1500M High-End 1500 Watts Monoblock Car Audio Amplifier/Amp +Remote

  • High-End 1500 Watts Monoblock Car Audio Amplifier/Amp +Remote Car Audio Mono-channel Amplifier / Amplifier Class: AB.
  • Max power output: 1500 watts / RMS Output Power Rating: 4 ohms: 120 watts x 1 channel / 2 ohms: 200 watts x 1 channel / Frequency Response: 10Hz -....
  • Signal-To- Noise Ratio: >96 dB / Voltage Supply: 11 - 16V DC / Gain Adjust: 200mV-8V.
  • Crossover Frequency: 40Hz - 250Hz / Crossover Slope (dB/oct): 12dB/oct.
Check Stock

Crunch PDX-1000.2 PowerDriveX 1000 Watt 2 Channel Exclusive Blue A/B Car Stereo Amplifier

  • 1000-WATT POWER: The Crunch PowerDriveX Car Stero Amplifier boasts 1000 Watts power.
  • 2 x 250 watts at 4 ohms, 2 x 500 watts at 2 ohms, 1 x 1000 watts at 4 ohms bridged.
  • 2 CHANNEL AMP: 2 Channel amplifier with Low noise pre amplifier with Rugged MOSFET pulse width modulation power supply.
  • Maximum low voltage signal from the source unit comes into the amplifier circuit with minimal distortion.
  • INPUTS/OUTPUTS: Low level RCA inputs and outputs.
  • Audio inputs: Unbalanced inputs (RCA) Audio outputs: Line output (RCA).
  • FEATURES: Flexible installation allows this amplifier to run in 2 channel or bridged mono mode.
  • Designed to be high sound quality with minimal distortion.
  • Maximum heat dissipation which minimizes distortion.
  • SPECIFICATIONS: Variable voltage: 0.2 5 volts.
  • Crossover type: Electronic switch FULL / LPF / HPF.
Check Stock

Orion Cobalt 4 Channel Amplifier – Class A/B Multichannel Amplifier 1750W RMS 3500W Max Car Electronics Car Audio Stereo Subwoofer 2 Ohm Stable Bass Boost MOSFET Amplifier for Car Speakers Sub Amp

  • Features – The 4 channel bass boost amplifier has features like - Frequency Response: 10HZ-30KHZ, Remote Bass Knob, 2-way protection, hi/low pass....
  • Class A/B – This multichannel subwoofer amplifier exhibits a Class A/B topology. In the presence of no audio signal, Class A Amplifier has a high....
  • Quality - This Class A/B 4 channel amplifier exhibits quality frequency response rates and crossover network which places this amp at a prominent....
  • Power – This Class A/B 2500 watt Amplifier has a power rating distribution as followed 875 X 4 MAX @ 2 OHMS. The 4 channel amplifier for car....
  • Low/High Level Inputs – The multichannel amplifier for car speakers come with low/high level inputs. A low level (RCA) input is measured in....
Check Stock

The Night Orion Fell A Survival Story

  • Features – The 2 channel bass boost amplifier has features like - Frequency Response: 10HZ-30KHZ, Bass Boost, Remote Bass Knob, Gain Control, 2-way....
  • Class A/B – This Orion Cobalt multichannel subwoofer amplifier exhibits a Class A/B topology. In the presence of no audio signal, Class A Amplifier....
  • Quality - This Class A/B 2 channel amplifier exhibits quality frequency response rates and crossover network which places this amp at a prominent....
  • Power – This Class A/B 1500 Watt Amplifier has a power rating distribution as followed 2250 X 2 MAX @ 2 OHMS, 1125 X 2 MAX @ 4 OHMS. The dual....
  • Low/High Level Inputs – The multichannel subwoofer amplifier for car stereo speakers come with low/high level inputs. A low level (RCA) input is....
Check Stock

Rockford Fosgate R1200-1D Prime 1,200 Watt Class-D Mono Amplifier

  • The RMS rating on this amplifier 400 watts x 1 @ 4 ohm, 800 watts x 1 @ 2 ohms and 1200 watts x 1 @ 1 ohm.
  • Number of items: 1.0.Package Weight: 3.357 kilograms.Package Dimensions: 10.922 L x 35.052 H x 23.368 W (centimeters).Class D Amplifier.Mono-channel Amplifier.The RMS rating on this amp 400 Watts x 1 @ 4-Ohm, 800 Watts x 1 @ 2-Ohm and 1200 Watts x 1 @ 1-Ohm.
Check Stock

Rockville dB45 3200 Watt/800w RMS 4 Channel Car Amplifier+Amp Kit Loud!!

  • Package Includes: (1) Rockville dB45 3200 Watt/800 Watt Dyno-Certified RMS 4 Channel Amplifier Car Stereo Amp, Loud!!. (1) Rockville RWK41 4 Gauge 4....
  • Features of dB45:� Rockville dB45 3200 Watt/800 Watt Dyno-Certified RMS 4 Channel Amplifier Car Stereo Amp, Loud!!. Dyno Certified RMS Power....
  • Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc). - 2 Ohm: 800 Watts x 4 Channel. - 4 Ohm:540....
  • Rockville RWK41 4 Gauge 4 Channel Car Amplifier Wiring Installation Kit. (2) 17 High Grade Twisted Pair of 100% Copper RCA Cable. 17 4 Gauge....
  • Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets. Soft abrasion proof insulating jacket allows for 100% improved....
Check Stock

Rockville dB55 4000 Watt Peak/980w RMS 5 Channel Car Amplifier + Amp Kit

  • Package Includes: (1) RockvilIe dB55 4000 Watt/2000w RMS 5 Channel Amplifier Car Stereo Amp, Loud!!, (1) RockvilIe RWK42 4 Gauge 4 Chan Car Amp Wiring....
  • Features of dB55: RockvilIe dB55 4000 Watt/2000 Watt RMS 5 Channel Amplifier, CEA Compliant Power Ratings (Rated at less than 1 % distortion) (Use....
  • - 2 Ohm 240 Watts x 4 + 1000 Watts x 1, - 4 Ohm: 160 Watts x 4 + 600 Watts x 1, Peak: (The amount of power the amplifier can produce for a split....
  • Features of RWK42: RockvilIe RWK42 4 Gauge 4 Channel Car Amplifier Wiring Installation Kit, (2) 17 High Grade Twisted Pair of 100% Copper RCA Cable,....
  • 3 4 Gauge Clear SuperFlex Ground Wire, Gold Plated AGU Heat Resistant Fuse Holder, 80 Amp AGU Gold Plated Fuse, 7 Split Tube Loom, Accessories....
Check Stock

4 Alpine SPE-6090 6x9 600 Watt Car Audio Speakers+4 Channel Amplifier+Amp Kit

  • (2) Alpine SPE-6090 6" x 9" 2 Way Pair Of Car Stereo Speakers Totaling 600 Watts. (1) Alpine BBX-F1200 600 Watt 4/3/2 Channel Amplifier Car Stereo Amp Class-A/B 2-ohm. (1)RockvilIe RWK42 4 Gauge 4 Chan Car Amp Wiring Installation Wire Kit (2) RCA's. 6" x 9" Type-E Coaxial 2-way Car Speakers. Polypropylene cone pearl mica injection. 3/4" Silk soft dome tweeter. Tweeter Magnet: Neodymium. Woofer Magnet: Ferrite. 4 ohms impedance. Square voice coil. Injection molded frame.
  • Peak Power Handling Per Pair: 600 watts. Peak Power Handling Each: 300 watts. RMS Power Handling Per Pair: 150 watts. RMS Power Handling Each: 75 watts. Frequency Response: 65-18,000 Hz. Sensitivity: 91 dB. Top-Mount Depth: 3". Mounting Diameter: 5-15/16" x 8-3/4". Features: Alpine BBX-F1200 600 Watt 4/3/2 Channel Amplifier Car Stereo Amp Class-A/B 2-ohm. Terminal Layout: Two-Sided. Screw Mount / Wire Cover: Integrated Wire and Mounting Screw Terminals.
  • Alpine BBX-F1200 600 Watt 4/3/2 Channel Amplifier Car Stereo Amp Class-A/B 2-ohm. Amplifier Type: Class-A/B. Channel Design: 4/3/2 Channel. Thermal Control: Thermal Management Control. Power Supply: DC-DC PWM Power Supply. Power Supply Design: MOSFET Power. Current Protection: Over-Current, Over-Voltage and Thermal Protection. Crossover:....
Check Stock

Hifonics 4 Channel Car Amplifier – Class A/B Gemini Series Multichannel Amplifier 1400 Watt Car Electronics Audio Subwoofer 2 Ohm Stable Bass Boost MOSFET Power Supply for Speakers Sub Amp

  • Power – This Class A/B 1400 Watt Car Amplifier has a power rating distribution as followed 350x4 @2 Ohms, 175x4 @4 Ohms. The 4 channel amplifier for car speakers also provides a 2-way protection circuitry as a part of its design..
  • Features – The 4 channel bass boost car amplifier has features like - Frequency Response: 10-22KHZ, Bass Boost, Remote Bass Knob, 2-way protection, variable low pass crossover: 40Hz-300Hz, variable high pass crossover: 40Hz-300Hz, subsonic filter:10Hz-40Hz, phase shift:0-180 degree, and ultra-fi mosfet power supply.
  • Class A/B – This multichannel subwoofer car amplifier for car stereo exhibits a Class A/B topology. In the presence of no audio signal, Class A Amplifier has a high amount of current flowing in its output while Class B amplifier has no current flowing..
  • Quality - This Class A/B 4 channel car amplifier exhibits quality frequency response rates and crossover network which places this amp at a prominent place. Durable design and highly efficient performance makes this subwoofer amp for car speakers stand out amongst the others..
  • RCA Ports - The RCA Jacks in this bass boost car amplifier allows you to develop multiple amplifier systems without using any splitter cords. The subwoofer amplifier thus puts you at ease....
Check Stock

Orion Cobalt 4 Channel Amplifier – Class A/B Multichannel Amplifier 2250W RMS 4500W Max Car Electronics Car Audio Stereo Subwoofer 2 Ohm Stable Bass Boost MOSFET Amplifier for Car Speakers Sub Amp

  • Features – The 4 channel bass boost amplifier has features like - Frequency Response: 10HZ-30KHZ, Remote Bass Knob, 2-way protection, hi/low pass crossovers, hi/low level inputs, MOSFET Power Supply, Thermal Protection, Gain Control, 2 Ohm Stable.
  • Class A/B – This multichannel subwoofer amplifier exhibits a Class A/B topology. In the presence of no audio signal, Class A Amplifier has a high amount of current flowing in its output while Class b amplifier has no current flowing..
  • Quality - This Class A/B 4 channel amplifier exhibits quality frequency response rates and crossover network which places this amp at a prominent place. Durable design and highly efficient performance makes this subwoofer amp for car speakers stand out amongst the others..
  • Power – This Class A/B 2500 watt Amplifier has a power rating distribution as followed 1125 X 4 MAX @ 2 OHMS. The 4 channel amplifier for car speakers also provides a 2-way protection circuitry as a part of its design..
  • Low/High Level Inputs – The multichannel amplifier for car speakers come with low/high level inputs. A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers.
Check Stock