Categories

Best Enclosure Ground Wire Connector

KICKER 2 43CVT102 COMPVT 10" 1600w Shallow Car Subwoofers+Mono Amplifier+Amp Kit

  • Shallow-mount subwoofer with true high-performance This sub is slim enough to be mounted in virtually any vehicle Delivers extreme bass with minimum depth Four-layer voice coil for max power handling Dark gray modified-spoke cone with bracing for clear bass response Ventless solid-pole design for direct mount to enclosure rear wall Steel “clearance” adapter plate replaces part of enclosure wall depth to further lessen depth Injection molded SoloKon cone Ribbed Santoprene surround High-temp coil wire Slender,.
  • strong steel basket with coil-cooling perimeter venting, Durable Spiralead tinsel leads Stitched surround for enhanced cone-to-surround strength Tough double-stitched surround Special spring-loaded binding posts for minimizing depth UniPlate system redirects heat away from motor structure Stamped Steel Basket Push Pin Terminals Top-mount depth : 4-1/4" Cutout diameter : 9-3/16" Frequency Response : 25 - 500Hz Sensitivity : 87.2 dB Minimum Sealed Enclosure : 0.8 cu. ft. Maximum Sealed Enclosure : 3 cu. ft. Minimum Ported Enclosure : 1.25 cu. ft. Maximum Ported Enclosure : 1.75 cu. ft. Subwoofer Design : Round / Circle.
Check Stock

MTX TNP212D2 12' 400W RMS Dual Loaded 1200W Car Subwoofer Enclosure Audio with Sub Box, Mono Block Amplifier, 8 Gauge Amplifier Amp Complete Wiring Installation Kit and Hi/Low Converter

  • ADD BASS: Add some bass to your car with the MTX 2 x 12 subwoofer Party Pack.
  • The enclosure designs delivers bass that exceeds expectation.
  • Each subwoofer can handle 200-watts RMS power (400-watts RMS for entire enclosure).
  • HIGH QUAILITY: Enclosure is constructed with extra strength 5/8 inch medium density fiberboard to ensure the enclosure contains low frequency sound waves generated by subwoofer without problem.
  • MONO BLOCK AMPLIFIER: Includes a 250-watt mono block amplifier that easily connects to any source, including factory radios.
  • AMPLIFIER INSTALLATION KIT & CONVERTER: Features a 20 foot 8 gauge red power cable, competition high quality fuse holder, 3 feet of 8 gauge black ground cable, 16 feet of 18 gauge blue turn on wire, a 20 foot high performance RCA interconnect, 30 feet of speaker wire, 20, 4 inch wire ties, 3, rubber grommets, a Number 10 ring terminal, a 5/16 inch ring terminal, and a 1/4 inch ring terminal.
  • Converter: Hi/Low Impedance Adapter, RCA Input Sensitivity Adjustment Control.
  • SPECIFICATIONS: Subwoofer enclosure: Max power: 1200 watt.
  • Single 4 ohm voice coils per sub (pre wired down to 2 ohm load).
  • Dimensions (HxWxD) : 13.875 x 29.625 x 1....
Check Stock

Audiopipe APSB-1299PP Dual 12 Inch Car Audio Subwoofer Speakers and Sealed Enclosure 2 Channel 500 Watt Amplifier and Wire Installation Kit

  • COMPLETE CAR AUDIO PACKAGE: Includes dual 12-inch enclosed subwoofers, an amplifier, sealed box, and 10 AWG wire kit.
  • AMPLIFIER FEATURES: 2 channel amplifier (APCL-1002) features 500 watts of max power, built-in variable high and low pass crossovers, and RCA line....
  • DEVICE PROTECTION: Amplifier is designed with short-circuit protection, DC offset, and thermal overload.
  • SEALED ENCLOSURE: Sealed MDF enclosure comes preloaded with (2) 12-inch subwoofers (APSE-120PC).
  • Dimensions (L x W x H): 27.4 x 15.4 x 12.91 inches.
  • WIRING KIT: Amp wire kit (BMS-750) comes 17 feet of red 10 AWG power wire, 3 feet of silver 10 AWG ground wire, 25 feet of 16 AWG speaker wire, 40A....
Check Stock

Memphis Audio MJP1244 12 in 1500 Watt MOJO Pro Car Audio Subwoofer DVC 4 ohm Sub, Black

  • ...des: (1) Memphis Audio MJP1544 15″ 1500 Watt MOJO Pro Car Audio Subwoofer DVC 4 ohm Sub. (1) Rockville dB13 3000 Watt Peak/750w RMS Mono 2 Ohm Amplifier Car Amp. (1) Rockville RWK41 4 Gauge Complete Car Amp Wiring Installation Wire Kit with RCA’s. (1) Rockville RSQ15 Single 15″ 2.6 cu.ft. Sealed Car Subwoofer Enclosure Sub Box. (1) Complete Single Sub Box Enclosure Installation Kit: Speaker Wire, Screws, Spades.
  • Features of MJP1544: Specifically designed for high SPL performance. DVVC Direct Vent Voice Coil Cooling. Cross drilled front plate venting. Aluminum shorting ring for reduced inductance. Foam surround. Rigid paper cone. Progressive spider. Diecast basket. Single Sided compression terminals. Size: 15 Inch. Voice coil: DUAL 4Ω. RMS/PEAK: 750/1500 Watts. SENS: 88 dB. DEPTH: 7.88 Inch. CUT OUT: 13.84 Inch.
  • Features of dB13: Rockville dB13 3000 Watt Peak/750w Dyno-Certified RMS Mono 2 Ohm Amplifier Car Amp. Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, RFFosgate, etc). – 2 Ohm: 750 Watts x 1 Channel .
  • Features of RWK41: 1 – 17’ High Grade Twisted Pair of 100% Copper RCA Cable. 17’ – 4 Ga....
Check Stock

Rockville DK512 PACKAGE Dual 12' 2800w K5 Car Subwoofer Enclosure+DB12 Amplifier

  • Loaded Sub Enclosure Features: Final Impedance: 2 Ohm, Peak Power Handling: 2800 Watts, CEA-2031 Compliant RMS Power Handling: 700 Watts, ¾” MDF enclosure, Bonded stapled and braced, Computer designed vents, Angled at 15 % for perfect bass alignment.
  • 2″ 4-Layer Black Aluminum Voice Coils Wound with OFC (100% Copper) Wire, The wire we use to wind the voice coil is imported from Japan which is way better quality than the standard China wire, 50 Oz High Quality Magnet.
  • Amplifier Features: Rockville dB12 2000 Watt/500w RMS Mono Class D 2 Ohm Amplifier Car Audio Amp, CEA Compliant Power Ratings (Rated at less than 1 % distortion).
  • RMS Power Ratings: (Use these RMS ratings when comparing with great brands such as Hifonics, Earthquake, Soundstream, etc.), – 2 Ohm: 1000 Watts x 1 Channel, – 4 Ohm: 600 Watts x 1 Channel.
  • Amp kit features: 1 – 17’ High Grade Twisted Pair of 100% Copper RCA Cable, 17’ – 4 Gauge Translucent Blue SuperFlex Power Cables, 17’ – 18 Gauge Blue Remote Cable, 17’ – 16 Gauge Clear Speaker Wire, 3’ – 4 Gauge Clear SuperFlex Ground Wire.
Check Stock

Rockville RV12.2B 1200W Dual 12 Car Subwoofer Enclosure+Mono Amplifier+Amp Kit

  • Rockville RV12.2B 1200W dual 12" Car Subwoofer Enclosure amplifier+amp kit.
  • Rockville RV12.2B Dual 12” bass enclosure system with matching mono block amplifier. 1200 watts peak power/ 400 watts RMS cea-2031 rating. Dual 12” bass enclosure system with matching mono block amplifier. Quasi transmission Line cabinet design..
  • Angled at 15% for near perfect in vehicle bass alignment. Exterior: high quality aviation grade tweed Carpet. Oversize Rockville Shield embroidery. Mono, Gold-plated push style, speaker terminal. Dual, high-power, high-efficiency 12" Subwoofers..
  • 1200 watts peak power. Power output: 200 watts RMS cea-2006 power @ 4-Ohm and 97DBA (Reference: 1Watt into 4 ohms). Frequency Response: 15Hz - 20Khz (-3Db). RMS power: 400 watts @ 2 ohms. 4 ohm mono-block class A/B..
  • 17" High grade twisted pair 100% Copper RCA cables. 17' 8 gauge translucent Blue Super flex Power cable. 3' 8 gauge clear super flex ground wire. 17' 18 gauge Blue remote cable. 17' 16 gauge speaker wire. Gold Plated anl heat resistant fuse holder.
Check Stock

MTX TNP212D2 12\ 1200 Watt 4 Ohm Dual Loaded Car Audio Subwoofer Package with Sub Enclosure, Planet 1500W Monoblock A/B Amplifier & 8 Gauge Wiring Kit

  • COMPLETE SOUND PACKAGE: Upgrade your cars sound system with this complete package that includes MTX 12 inch dual loaded car subwoofer, a sub enclosure, Planet Audio monoblock amplifier and a complete 8 gauge amp installation wiring kit.
  • CAR SUBWOOFER: The MTX Terminator series subwoofer system includes 2 subs, sub enclosure and a car amp.
  • Boasts 1200 watts max power and 400 watts RMS.
  • Features rubber surround, polypropylene cone and a 2-inch aluminum single 4 ohms voice coil.
  • SUBWOOFER BOX ENCLOSURE: This MTX enclosure features solid MDF construction and thick black carpet.
  • Dimensions (H x W x D1 x D2): 14 x 29.69 x 13.5 x 11.13 inches.
  • CAR AMPLIFIER: Planet Audio Amplifier delivers 700 watts RMS x 1 @ 4 Ohm, 1100 watts RMS x 1 @ 2 Ohm, 2500 watts RMS x 1 @ 2 Ohm max power, 1500 watt max power.
  • Switchable input sensitivity: 100mV 2V or 2V 8V.
  • Dimensions (H x W x L): 2.19 x 10 x 10 inches.
  • INSTALLATION WIRING KIT: 20-foot 8 gauge red power cable.
  • 20-foot high performance RCA interconnect.
Check Stock

Memphis Audio MJME8S1 8' MOJO Car Subwoofer+Ported Sub Enclosure+Mono Amp+Wires

  • Package Includes: (1) Memphis Audio MJME8S1 8″ MOJO Car Subwoofer In Ported Sub Enclosure Box MJM822, (1) RockvilIe RXD-M3 4000 Watt/2000w RMS Mono Class D 1 Ohm Amplifier Car Stereo Amp, (1) RockvilIe RWK41 4 Gauge Complete Car Amp Wiring Installation Wire Kit with RCA’s.
  • Features of MJME8S1: Piano black gloss finished front panel, Carpet wrapped enclosure, 4-layer wound copper voice coil, Fiberglass reinforced subwoofer cone, Stitched foam surround, Heat dissipating aluminum heat sink, DVVC Direct Vent Voice Coil Cooling, Ported Enclosure. Specifications of MJME8S1: Single 8″ 900w RMS/1800w PEAK @ 1Ω loaded enclosure, Width 20.7″, Height 12.7″, Top 13.7″, Bottom 16.2″.
  • Features of RXD-M3: RockvilIe RXD-M3 4000 Watt/2000w RMS Mono Class D 1 Ohm Car Stereo Amplifier With Optical Coupler Technology, CEA Compliant Power Ratings (Rated at less than 1 % distortion) (Use these CEA ratings when matching and comparing with other CEA compliant brands such as Kicker, Rockford Fosgate, etc), 1 Ohm: 1000 Watts x 1 Channel .
  • RMS Power Ratings: (Use these RMS ratings when comparing with great brands such as Hifonics, Earthquake, Soundstream, etc), 1 Ohm: 2000 Wat....
Check Stock

Super Antenna MR8075 SuperWire Radial Set 80m-75meter for HF Vertical Antennas 3.5MHz Band ham Radio MP1 Counterpoise Ground Plane

  • ...nd. FREQUENCY RANGE: Covers 3.4 to 4.2 MHz. Also covers CAP, MARS, Marine, shortwave, and HF bands (when used with MP1 antenna system or similar vertical antennas). GAIN: +4.5dB over a typical ground rod..
  • COMPATIBILITY: Fully compatible with all Super Antenna MP1 Antennas and Equipment. Attaches by included push-on connector to Super Antenna mounts (mount not included, sold separately). Deploys in one minute by one person with no tools needed. Compatible with most other vertical antennas and ground planes. Includes spare mating connector for use with other types of antennas..
  • SIZE: Packs down to a 10"x4" (25x10cm) compact roll for portability. Extends and fans out to a full size quarter-wave wire. WIRE: Made of one highly flexible SuperWire 18AWG multi-strand Stealth Wire. LENGTH: Max wire length: 65 feet (19.8m). CONNECTOR: Standard push-on connector 1/4-inch (6mm) female. An extra #8 Screw ring terminal with screw is included. The wire can be cut to a shorter length by the user..
  • WEIGHT: 6 ounces (177grams). POWER RATING: 500W SSB, 300W CW/DATA. COLOR: Stealth Black. WEATHERPROOF: Submersible and UV resistant..
Check Stock

Fancasee (2 Pack Replacement 3.5mm Female Jack to Bare Wire Open End TRRS 4 Pole Stereo 1/8" 3.5mm Jack Plug Connector Audio Cable for Headphone Headset Earphone Microphone Cable Repair

  • Perfect replacement 3.5mm female jack connector to bare wire audio cable for worn-out or broken headphone headset earphone microphone speakers cable repair..
  • 3.5mm stereo 4 pole female jack to bare wire replacement audio cable..
  • PIN 4 - black wire. OMTP standard: PIN1 - Left channel.
  • PIN 4 - Ground. CTIA standard: PIN1 - Left channel.
  • Easy to handle, you really don't have to be a professional to do this. Connect the corresponding bare wires together, wrap and seal the bare wire with insulating tapes..
  • Package contents: 2-Pack 12 inch 3.5mm stereo 4 pole female jack connector replacement audio cable..
Check Stock

Super Antenna MR1710 SuperWire Radial Set for HF Vertical Antennas 17m 15m 12m 11m 10m Bands ham Radio MP1 Ground Plane

  • ... MHz to 30 MHz continuous. Also covers WARC bands, CAP, MARS, Marine, CB (26MHz-27MHz), and HF bands (when used with MP1 antenna system or similar vertical antennas). GAIN: +4.5dB over typical ground rod..
  • COMPATIBILITY: Fully compatible with all Super Antenna MP1 Antennas and Equipment. Attaches by included push-on connector to Super Antenna mounts (mount not included, sold separately). Deploys in one minute by one person with no tools needed. Compatible with most other vertical antennas and ground planes. Includes spare mating connector for use with other types of antennas..
  • SIZE: Packs down to a 6″x4″ (15x10cm) compact roll for portability. Extends and fans out to 4 full size quarter-wave wires (1 wire for 17m band, 1 wire for 15m band, 1 wire for 12m/11m band, 1 wire for 10m band). Max wire length: 13 feet (4m). CONNECTOR: Standard push-on spade lug 1/4-inch (6mm) female and #8 Screw ring terminal with screw included. WIRE: Proprietary SuperWire 18AWG 41-Strand PTFE Stealth. LENGTH: Max wire length: 13 feet (4m)..
  • WEIGHT: 5 ounces (133grams). POWER RATING: 500W SSB, 300W CW/DATA. COLOR: Stealth Black..
Check Stock

Fancasee (2 Pack Replacement 3.5mm 90 Degree Male Plug to Bare Wire Open End TRRS 4 Pole Stereo 1/8" 3.5mm Plug Jack Connector Audio Cable for Headphone Headset Earphone Microphone Cable Repair

  • Perfect replacement 3.5mm 90 degree right angle male plug connector to bare wire audio cable for worn-out or broken headphone headset earphone microphone speakers cable repair..
  • 3.5mm 90 degree right angle stereo 4 pole male plug to bare wire replacement audio cable..
  • PIN 4 - black wire. OMTP standard: PIN1 - Left channel.
  • PIN 4 - Ground. CTIA standard: PIN1 - Left channel.
  • Easy to handle, you really don't have to be a professional to do this. Connect the corresponding bare wires together, wrap and seal the bare wire with insulating tapes..
  • Package contents: 2-Pack 10 inch 3.5mm 90 degree right angle stereo 4 pole male plug connector replacement audio cable..
Check Stock

Miady 25ft Trailer Wiring Harness with 4 Flat Connector, 18 AWG Color Coded Wires Trailer Light Wiring Harness Extension with 4ft White Ground Wire

  • Long Enough: The Miady 25' Trailer Wiring Harness gives you the extra length, just need to extend current truck to trailer wires. No need to splice your new wires, simply extend them with this extender..
  • Wishbone Style Wiring Setup Designed: Constructed with Wishbone Style Wiring Setup and 4 way connectors design makes the running light circuit and splits it at the trailer connector, so you do not have to run a jumper wire from one taillight to the other. Simplify the installation process to save more time..
  • 4FT LENGHT GROUND WIRE: Equipped with 4 Way flat plug connector with trailer ends and a white ground wire, designed to split at the trailer tongue and run down each side of the trailer. The trailer side ground wire is 4ft, it is enough to use for your trailer, which is completely sealed for a long corrosion-resistant installation..
  • SIMPLIFIED CONNECTION: Come with 18 AWG COLOR CODED WIRES clearly identify each wire's function, makes it much easier for wires connection as well as adding more convenience and installation safe and straight-forward..
  • Wide Application: Ideal for marine boat trailer, horse trailer, motorcycle trailer, ATV trailer, and other cargo utility trailer hitches (tow/haul vehicle must have 4-way plug) . - We provide 24*7 friendly c....
Check Stock