Categories

Best End Bits Bulldozers

Tractors Bulldozers Ugly Christmas Sweater Style Toddler Kids Sweatshirt 3T Red

  • Tractors & bulldozers ugly christmas sweatshirt. A comfy, soft toddler & young kids crewneck sweatshirt, christmas gift for the little ones..
  • Christmas sweater for your son or grandson. Quality graphic apparel.
  • Christmas gift for boys who love tractors bulldozers diggers and all things construction related.
  • Great christmas truck sweater .memorable fun novelty gift idea.
  • Cozy, soft and warm christmas outfit for toddler boys. For the holidays.
Check Stock

Tonsiki Ball End Hex Bits & Screwdriver Handle Set, Magnetic 1/4'' Hex Shank Ball End Hex Head Allen Wrench Screwdriver Bits with Quick Release Screwdriver Holder Handle

  • 【HIGH QUALITY S2 STEEL】Ball end hex bits are made of excellent industrial grade S2 steel material for superior hardness which it's reaches 61RCH, ball end allen bit set be Nickel plating treatment by surface, for good anti-rust and anti-corrosion funcitons. It will not be rust and keep the gloss even if exposed to the air for a long time, which is more stronger and durable than others..
  • 【STRONG MAGNETIC】Ball End bits built-in magnetic, can be easily keep screws stuck to them, the hex socket of quick release handle also come with magnetic, perfect match with the ball end screwdriver bits, the quick-release chuck enables rapid bit change without needing any special tools..
  • 【9 PROFESSIONAL METRIC SIZES】 Ball end hex screwdriver bit set with 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm, 10mm. Each Size is was laser measured for a perfect size measurement! It can get the job done quickly which match with our screwdriver handle..
  • 【BALL END DESIGN】Can tighten the screw in vertical or inclined side, suitable for limited space. All the ball end hex bit set packed in a plastic screwdriver holder storage bar, for convenient to store and carry..
  • 【WIDE APPLICATIONS】This ball end hex screwdriver bit handle set can be used to repair cars, motorcycles,....
Check Stock

BOSCH ITDET30601 Impact Tough 6 In. Torx #30 Double-Ended Bit

  • 3532993C - Double End Bit 3Pc Set 2-3/8".
  • Double-end bits combine two of the most common screwdriver bits.
Check Stock

Titan Attachments Auger Extension 48' Solid Steel 2' Hex Male 2' Hex Female

  • Compatible with 2" Hex Drive Units and Auger Bits.
  • Extend your auger bits for deeper holes or hard to dig areas..
  • Weight: 68 lbs. Female end: fits 2" Hex Male end: 2" Hex Overall Length: 48" Material: Steel.
Check Stock

Spetool 90 Degree Carbide V Bits with Tiain Coated 4 Flutes Chamfer End Mill for Caving V Groove and Sign

  • Chamfer End Mill With 90 Degree, 1/4" Shank Diameter, 2" Overall Length..
  • The Router Bits Are Super for Carving V Groove, CNC Lettering And Signs, And Chamfering End..
  • 4 Flutes Designed Chamfer Bits to make Cutting More Efficiently And Clean Surface..
  • Solid Carbide Material With Tiain Coated, Applicable for Hard wood, Plywood, Soft wood, OAK, MDF And Metals Under HRC 55..
  • V Groove Router Bits Can Be Used in CNC,X Carve,Router hand and Table Mount, And Most Brand Handheld Routers with 1/4 Inch Collets..
Check Stock

Genmitsu 4pcs 2-Flute Tapered Ball Nose End Mills Tungsten Carbide Cutter with Nano Blue Coat R0.25-1.0 1/8” Shank TB04A

  • Cost-Effective: Coming with 4x 2-Flute tapered ball nose end mills, Shank Diameter: 3.175mm, Radius: 0.25, 0.5, 0.75, 1.0mm, Cutting Length: 15mm, Overall Length: 40mm..
  • Versatile: Perfect for 3D machining jobs like molds, rapid prototyping, models and other other precision parts processing, these Tapered ball nose bits can do the best..
  • Applicable Materials: These nano blue coating bits have an HRC rating of 65 and are optimal for milling a wide range of materials, including plastics, aluminum, circuit board, wood, etc. To learn more about how to choose the right bits to meet your needs, please find the Comparison Chart (CNC Bits Buying Guide) at the Product Guides and Documents Section below..
  • Wide Compatibility: Genmitsu TB04A tapered ball nose end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device..
Check Stock

YOYO TOOLS, Carbide Square Nose End Mill Set- Metric Carbide End Mill CNC Milling Cutter Tungsten 4 Fultes by YOYOTOOLS (D8+D10 End Mill)

  • 8mm and 10mm End Mill Set, Material : Tungsten Carbide.
  • End Mill Cutting Diameter : 8mm , 10mm, HRC55 degrees.
  • Suit for: with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
  • End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
  • The bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
Check Stock

EANOSIC Spiral Router Bits Up Down Compression Bit 1/4 inch Cutting Diameter with Nano Blue Coated, 1/4 inch Shank Solid Carbide CNC End Mill for Wood Carving Engraver Milling Cutters for Mills Machines

  • UP & DOWN cut spiral router bit with 1/4 inch shank and 1/4 inch cutting diameter, 1 inch cutting length, 2-1/2 inch for total length.
  • SOLID CARBIDE AND NANO BLUE COATED: The up and down cut spiral router bit is made of solid carbide. And Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality. Clean surface, neat, no glitches..
  • Spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly upcut and downcut groove and slots, mortises, cycles and dados with clean edge and bottom, better than straight bits..
  • The CNC End Mill Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp. And also for carbon steel, soft alloy steel, tool steel, cast iron, aluminum alloy..
  • The router bit suit for CNC router and any plunge routers with 1/4" collet..
Check Stock

SpeTool Carbide Chamfer End Mill V Groove Router Bit 60 Degree, 4 Flutes 1/4 inch Shank for CNC Carving and Chamfering

  • Chamfer End Mill With 60 Degree, 1/4" Shank Diameter, 2" Overall Length..
  • The Router Bits Are Super for Carving V Groove, CNC Lettering And Signs, And Chamfering End..
  • 4 Flutes Designed Chamfer Bits to make Cutting More Efficiently And Clean Surface..
  • Solid Carbide Material With Tiain Coated, Applicable for Hard wood, Plywood, Soft wood, OAK, MDF And Metals Under HRC 55..
  • V Groove Router Bits Can Be Used in CNC, X carve, 3D carving, Router Hand And Table Mount, And Most Brand Handheld Routers with 1/4 Inch Collets..
Check Stock

Toystate Road Rippers CAT Mini Machine Free Construction Playtime Kit (12 Pack: 4 x Dump Trucks, Wheel Loaders, Excavator, 2 x Bulldozer, 1

  • DUMP TRUCKS: 4 dump trucks are included, each with two axles and fully functioning dumping trays.
  • BULLDOZERS: 2 bulldozers are included, with simulated treads and liftable demolition arm.
  • WHEEL LOADERS: 2 free wheeling loaders have lifting arms, so you can carry sand and drop it into the dump truck.
  • EXCAVATORS: 2 excavators with double jointed digging arms are included. The body also swivels on top of its two axles for realism.
  • BACKHOES: 2 Backhoes with a rear digging arm and front scooper, both functionable.
Check Stock

AUTOTOOLHOME 1/8\ 3/16\ 1/4\ 5/16\ 3/8\ 1/2\ high Speed Steel HSS 4 Flute Straight End Mill Cutter 5/32\ 1/16\ Set of 8

  • Cutting Diameter : 1/8" 3/16" 1/4" 5/16" 3/8" 1/2" 5/32" 1/16".
  • Suit for: Hardness of metal for above 30 degrees,with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
  • End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
  • The bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
Check Stock

Yakamoz 10-Pack 1/8" Shank Upcut Spiral Router Bits 3-Flute 7/8" Cutting Length CNC Router Flat End Mill Bits for MDF Acrylic Wood PVC 7/8" Cutting Length

  • Type: Spiral (Upcut), Cutting Type: 3 Flutes with Flat End, Shank: 1/8" (3.175mm), Cutting Diameter: 1/8" (3.175mm), Cutting Length: 7/8" (22mm), Overall Length: 1-33/64" (38.5mm).
  • Spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly upcut groove and slots, mortises, cycles and dados with clean edge and bottom, better than straight bits..
  • The unique flute design makes cutting process easier and faster, smooth cutting without 2nd polishing process..
  • Great for carving, cutting, engraving, milling in materials like density board, plastic, PCB, PVC, PP, MDF, nylon, resin, plywood, hardwood etc..
  • Built with tungsten steel, the CNC router mill has the superiority of high hardness, high-temperature resistance, and wear resistance..
Check Stock

Capri Tools 6 mm M6 Stubby XZN Triple Square Bit Socket, 1/4-Inch Drive (CP30353)

  • These XZN triple square bits are a must have for working with BMW, Mercedes, VW, Audi, Porsche and most other European vehicles.
  • Stubby bits, up to 20% shorter than standard length bits, are perfect for tight spots.
  • Premium S2 steel forged bits are exceptionally strong and durable. These S2 steel bits withstand high torque and do not twist, protecting both the bit and the fastener. Premium Chrome Vanadium steel sockets plated with our SmartKrome protective plating are durable and corrosion resistant.
  • Our proprietary advanced heat treatment process further enhanced the S2 and Chrome Vanadium steel alloy to achieve the optimal balance of strength and performance. All bits have chamfered end to ensure a smooth fit onto fasteners.
  • 1/4 in. Drive M6 (6 mm) stubby XZN triple square bit.
Check Stock