Categories

Best End Milfor Cutting Aluminum

JW Winco A8330221 B10 V8 AN605 PHOTOCELL CLAMP Plastic

  • Application: Used for building industrial aluminum frame structure, 3D printer, CNC router, CNC cutting machine, etc..
  • Easy to Install and Use: The end cover is easy to install and use, and can be easily fixed with screws.
  • Aluminum Alloy: The end cover made of high quality aluminum alloy, the surface is anodized, and will not fade.
  • Elaborate Production: Elaborate processing, this 8080 double slot end caps is beautiful and top grade.
  • Professional Uses: This is 8080 double grooves end caps, which for profiles end caps.
Check Stock

AUTOTOOLHOME 1/4 inch HSS 4 Flutes End Mills Milling Cutter End Drill Bit Straight Shank Pack of 2

  • HIGH PROCESSING EFFICIENCY: the edge of end mill bits is HARD and SHARP with TIAIN coating, process the heat treatment materials under 32°with high speed, reduce changing times and improve the production efficiency..
  • APPLICATION: end mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
  • CUTTING EDGE DESIGN: the bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
  • STRONG and DURABLE:The end mill bits are made from Ultra-fine tungsten steel bar, with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
Check Stock

YG1 E5G97911 | 1/4x1/4x5/8x2-1/2 AluPwr 3FL HP Carbide Corner Radius End Mill

  • Corner radius end mills have cutting edges with rounded corners to reduce chipping and provide longer tool life.
  • Four flutes produce a better finish than fewer flutes.
  • Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures.
  • Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds.
  • Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling.
Check Stock

YOYO TOOLS, Carbide Square Nose End Mill Set- Metric Carbide End Mill CNC Milling Cutter Tungsten 4 Fultes by YOYOTOOLS (D8+D10 End Mill)

  • 8mm and 10mm End Mill Set, Material : Tungsten Carbide.
  • End Mill Cutting Diameter : 8mm , 10mm, HRC55 degrees.
  • Suit for: with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
  • End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
  • The bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
Check Stock

MAX-CRAFT HSS Cobalt Drill Bit Double End 30# (0.1285') Stubby Body Drill Steel Metal Iron-10Pcs

  • ✔️DOUBLE END DRILL BIT SIZE:  30#(0.1285")Diameter) x 5/8"( Flute Length) x 2" (Overall Length).
  • ✔️MATERIAL: HSS Cobalt Material is the best hardened material for drilling longest life.
  • ✔️DOUBLE END CUTTING POINT :The 2 cutting point of one single drill bit, when one cutting point is used bored and the other cutting end can be used, as another new drill bit..
  • ✔️SPLIT POINT 135 DEG. ANGLE: No center punch is needed-- the aggrevsive 135 Deg. Split Point quick-cut points are self-centering and penetrate quickly with less pressure..
  • ✔️APPLICATION: Drill through stainless steel, general steetl, metal sheet, iron, copper, aluminum, plastic….
Check Stock

AUTOTOOLHOME 1/8\ 3/16\ 1/4\ 5/16\ 3/8\ 1/2\ high Speed Steel HSS 4 Flute Straight End Mill Cutter 5/32\ 1/16\ Set of 8

  • Cutting Diameter : 1/8" 3/16" 1/4" 5/16" 3/8" 1/2" 5/32" 1/16".
  • Suit for: Hardness of metal for above 30 degrees,with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
  • End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
  • The bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
Check Stock

TEKTON Pliers Set, 7-Piece (Long Nose, Diagonal Cutting, End Cutting, Cable Cutting, Lineman's) | PLR99010

  • Includes 2-pc. long nose pliers: 7, 8 in..
  • Diagonal cutting pliers snip soft metal wire and end cutting pliers clip off nails, trims wire, and pull staples.
  • Cable cutting pliers have curved blades made especially for holding and shearing round wire and cable.
  • Three long nose pliers provide multiple options, from a long, slender nose (straight or bent) to a stout, strong model for tougher jobs.
  • Linemans pliers feature flat, squared off jaws for twisting wires together and side cutters for snipping copper, aluminum, and steel wire.
  • Crosscut teeth on the gripping pliers evenly distribute jaw force.
  • Induction-hardened cutting blades (except cable cutters) offer superior cutting performance and durability.
Check Stock

OREI eARC 4K 60Hz Audio Extractor Converter 18G HDMI 2.0 ARC Support - HDCP 2.2 - Dolby Digital/DTS Passthrough CEC, HDR, Dolby Vision HDR10 Support (HDA-927)

  • Cutting Diameter : 1/8" 3/16" 1/4" 5/16" 3/8" 1/2" 5/32" 1/16".
  • Suit for: Hardness of metal for above 30 degrees,with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
  • End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
  • The bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
Check Stock

Niagara Cutter C430R-0.375-D3-R030.0-Z4 C430R Carbide Radius End Mill TiAlN Finish 4 Flutes 3/8 Cutting Diameter 3/8 Shank Diameter 2-1/2 Overall Length 1

  • Corner radius end mills have cutting edges with rounded corners to reduce chipping and provide longer tool life.
  • Four flutes produce a better finish than fewer flutes.
  • Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures.
  • Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds.
  • Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling.
Check Stock

Zenna Home Shower Rod, 26-76-inch, Black

  • MADE OF RUSTPROOF ALUMINUM FOR LONG-LASTING USE: Adjustable shower rod boasts lightweight and strong aluminum construction that is guaranteed for life against rust.
  • TENSION ROD EXPANDS TO PROVIDE A STRONG HOLD.
  • GREAT FOR USE IN MULTIPLE ROOMS: Innovative adjustable-length shower rod has a versatile 50-inch range to fit spaces from 26 to 76 inches.
  • use it in any standard or stall-sized tub or shower enclosure, or in window spaces or for closet organization.
  • EASY AND SECURE INSTALLATION WITH NO TOOLS: Tension-mount technology means installation is easy and tool-free, with no drilling and no damage to your walls.
  • NO CUTTING NEEDED: Easy-to-follow instructions included, and no cutting is required for any installation length.
  • ATTRACTIVE BRUSHED NICKEL FINISH: Brushed nickel finish complements your bath décor and furniture choices.
  • WITH DECORATIVE FINIAL END CAPS FOR ADDED STYLE: Finial end caps add a decorative touch wherever you install the rod.
Check Stock

Greenglass House. Tom 2. Duchy hotelu Greenglass House

  • 480 Pages - 05/25/2023 (Publication Date) - Dwukropek (Publisher).
Check Stock

The Lieutenant - The Complete Series, Part 1

  • Gary Lockwood, Robert Vaughn, John Milford (Actors).
Check Stock

Jewelry Pliers,2 Pack End Cutting Pliers,Top Stop Slider Bottom Repair Molded Spiral Zipper Install Pliers Tool End Nippers for Zipper Install Stops Repair (End Cutting Pliers-2Pcs)

  • Premium Material : The end cutting pliers are made of high quality forged steel and vinyl coated anti-slip handle,durable and not easy to crack..
  • Comfortable Design : The end cutters are designed with rubber sponge non-slip handle and maximum leverage and hardened cutting jaws,which is comfortable to grip and durable for use,you can easily do the zipper repair..
  • Easy to Use : The end nippers tool come with double spring leaf and non-slip handle which could ensure higher working efficiency,easy to work with even for one-hand operation..
  • Size : The length of end cutting pliers is 4.5 Inche,width 2.3 inch..
  • Widely Application : Nail puller pliers are great for cutting and bending many kinds of sofe wires such as steel wire,iron wire,aluminum wire,alloy wire,zip cable tie,guitar string and wood candle wicks.Also can be used for zipper stoppers installing,pulling up nails and brads,etc..
Check Stock