Categories

Best End Mill Keyway Cutters

Rannb End Mill Cutter 1/16\ Cutting Dia 1/4\ Shank Dia 4 Flutes End Mill Drill Bit - 5pcs

  • ⭐【Material】The end mills are made of High Speed Steel,high hardness,good wear resistance and durability..
  • ⭐【Pack of 5pcs】Sold in pack of 5pcs of end mill cutters..
  • ⭐【Good Design】 Large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
  • ⭐【Applicable Material】Suitable for side milling, end milling, finish machining in carbon steel, alloy steel, die steel, tool steel, cast iron, and titanium.And Circuit boards,Metal,Majority of plastics, Wood, Fibre glass, Carbon and environmental board..
  • ⭐【Heat Treatment Process】The High Hardness Steel go through the heat treatment process so the end mill is more durable. Reduce changing times and improve the production efficiency..
Check Stock

Accusize Industrial Tools 10 Pcs Hss Woodruff Key Cutter Set 1/2 Straight Shank 3800-1101

  • High speed steel straight tooth Woodruff keyseat end mill.
  • Straight tooth cutters cutting standard and woodruff keyways in steel and other ferrous materials..
Check Stock

CNC Router Bits 1/8' Shank Ball Nose Carbide End Mill Two Flute CNC Spiral Bits Upcut Cutter 3.175mm Carbide End Mill for Alloy Steels/Hardened Steels 10pcs (3.175x32x55mm)

  • DIMENSIONS: 1/8" (3.175mm). Cutting edge diameter, 1/8" (3.175mm). Cutting edge length/flute length, 1/2"(12mm). Overall length, 1-1/2"(38.5mm)..
  • Range of processing：Ball end mills can mill die steel/cast iron/carbon steel/alloy steel/tool steel/ general iron. Ball nose milling cutters can work normally in high temperature environments..
  • High efficiency：Ball nose carbide end mill is a double-blade with helical design, and the large and uniform pin-out groove is conducive to high-speed machining. The sharp double edge can effectively improve the cutting efficiency of the tool..
  • Perfect cutting：The ball mill design of the double-blade ball end milling cutter effectively reduces the burr and increases the wear resistance of the tool..
  • Ball Nose End Mills are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

1/16\ Tip Dia. x 1/2\ Flute Length - Solid Carbide Tapered End Mill - 10 Degree Per Side

  • 3PCS Tapered angle Ball Nose End Mill / Cone Cutters, super design for carving and clearing edge.
  • Ball Raidus 1/64 inch 1/32 inch 1/16 inch, Flute Length:15MM, Overall Length: 1 Inch.
  • The bits for CNC,Engraving machine.Plywood, hardwood, acrylic, 3D carving.
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time.
Check Stock

TECHTONGDA Sharpener End Mill Lathe Drill Bit Knife Grinder R8 Collects with Accessories

  • Five R8 collects are equipped with the multi-functional cutter grinder sharpener. The size of the collects are 0.15”, 0.2”,0.3”, 0.4”, 0.5”..
  • Accessories for end mill, lathe, drill Bit are included. These accessories will help you better finish the work..
  • 2 kind of grinding wheels are included. One is made of white corundum and one is made of metal..
  • Two fine-tuning bearings guarantee the accuracy and the sharpening quality. The universal index head is provided at 24 positions so that any particular angle of shape can be obtained..
  • The sharpener is mainly used for grinding HSS and carbide engraving cutter as well as single lip or multiple lip cutters of various shapes such as radiuses cutters or negative taper angle of cutters..
Check Stock

EANOSIC Upcut Spiral Router Bit 3-Flute with 1/2” Shank, Extra Long (4 inch), 1/2” Cutting Diameter, 2” Cutting Length, Carbide CNC Router Bits End Mill for Wood Mortises Carving Engraving

  • Up cut spiral router bit with 1/2 inch shank and 1/2 inch cutting diameter, 2 inch cutting length, 4 inch for total length.
  • PREMIUM QUALITY: The spiral upcut router bits Made of solid carbide (Tungsten steel), it is high-wearable and has a long life. You can decrease the times of changing cutters, save production time..
  • The CNC End Mill Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp. And also for carbon steel, soft alloy steel, tool steel, cast iron, aluminum alloy..
  • Spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly upcut groove and slots, Mortises, Cycles and dados with clean edge and bottom, better than straight bits..
  • The router bit suit for CNC router and any plunge routers with 1/2" collet..
Check Stock

SpeTool 5Pc/Pack Tapered Cone 1/8 End Mills 0.5MM Cutting Radius 1.0mm Diameter 3D Wood Engrave CNC Router Bits Tools

  • 5PCS Tapered angle Ball Nose End Mill / Cone Cutters, super design for carving and clearing edge.
  • 1/8Inch Shank Diameter, 2 Flutes, TiAlN Coated for wear resistance.
  • Ball Raidus 0.5MM, Flute Length:15MM, Overall Length: 1-1/2Inch, Single Side Angle 4.16°.
  • The bits for CNC,Engraving machine.Plywood, hardwood, acrylic, 3D carving.
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time.
Check Stock

SpeTool 4Pcs/Pack Assorted R0.25~1.0 Tip 1/8 Tapered End Mill Cone Ball Nose Carbide Bit CNC Cutter for Carving Engraving

  • 5PCS Tapered angle Ball Nose End Mill / Cone Cutters, super design for carving and clearing edge.
  • 1/8Inch Shank Diameter, 2 Flutes, TiAlN Coated for wear resistance.
  • Ball Raidus: 0.25, 0.5, 0.75, 1.0MM, Flute Length:15MM, Overall Length: 1-1/2Inch.
  • The bits for CNC,Engraving machine.Plywood, hardwood, acrylic, Carbon steel,inconel, etc.
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time.
Check Stock

Ladieshow MT2-FMB22 Face Mill Holder + 400R-50-22 CNC Lather End Milling Cutter + 10pcs APMT1604 Carbide

  • Sturdy and Durable: The end mill set is made of carbide material, with high hardness, high strength, not easy to deform and damage, good impact resistance and long service life.
  • High-Precision Machining: The milling cutter kit adopts high-precision machining technology, and the surface adopts new coating technology, which has good oxidation resistance and high temperature resistance.
  • Machining Range: Face CNC milling cutters are suitable for precision machining, roughing, flat and step machining and are the ideal toolkit for heavy duty CNC milling.
  • High Speed: Face end mills have better cleanliness and more stable accuracy, and the rotation and milling feed rates are 3 times faster than ordinary milling cutters.
  • Widely Used: Face milling cutter is a common main accessory for milling CNC machine tools, fixture milling machines, horizontal boring machines, ordinary boring and milling machines, drilling machines, bench drills and small machine tools.
Check Stock

wolfcraft 6901000 1 Parallel milling Guide, Multicolored

  • Parallel milling stop Suitable for items up to 40 mm thick for end mills up to 27 mm wide. For use solely with Master Cut 2000 and Master Cut 1500 items. Wolfcraft stop with precision adjustment..
  • For perfect results, it is possible to adapt to the size of the end mill using an adjustable stop. The parallel milling stop can be mounted safely without any tools using controls. Clever connection for suction of dust. Large items should be supported by a roller stand (e.g. ref. 6102300, weight 2.8 kg, 10-year *).
  • Rotary knobs and adjustable stop for quick, tool-free fastening to the tabletop.
  • Adjustable stop for adapting to milling cutters up to a diameter of 27 mm ..
  • Connection for commercially available vacuum cleaner for dust-free working.
Check Stock

TINVHY 3/4Inch R8 Shank Shell Mill Arbor Adapter Replacement for Bridgeport Machine

  • Arbor dia: 1-1/4 Inch, For Range of Shell End Mill: 1-3/4 to 2inch..
  • Hardened and ground, prevents run-out of your cutting tools, Shank traverse ground to obtain optimum accuracy..
  • For holding saws or small cutters, R8 style replacement for Bridgeport type machine..
  • Hardened and ground throughout to assure maximum concentricity..
Check Stock

End Mill Set Metric CNC Milling Cutter Union Butterfield Tungsten 4 Fultes accupro Carbide Rotary Bits Tool Straight Shank 2-12mm 8pcs

  • ◆2-12mm End Mill Set: This end mill set includes 8 diameter sizes of 2mm, 3mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12mm, satisfy your different needs..
  • ◆End Milling Cutter Handle Design：Straight shank handle, rounded chamfer design for easy installation and improved work efficiency..
  • ◆Excellent Carbide End Mill: Carbide end mills provide better rigidity and can be run faster. 4 flutes end mill produce a much finer finish than other flute tools, ideal for peripheral and finish milling..
  • ◆Wide Application CNC End Mill：It can be used on many fields, such as metal processing, CNC machining and engineering using. Large chip flute design for smoother chip removal, making the workpiece smoother and brighter..
  • ◆Package Included：8 x 4 Flutes End Mill Cutter.
Check Stock

SpeTool Tapered Ball Nose Router Bit 1/4\ X 3\ with 1.0mm Tip Diameter（0.5mm Radius） Ball Nose End Mill 4.82Deg for CNC Machine Engraving Carving Bits Woodworking H-Si Coated

  • Tapered angle Ball Nose End Mill / Cone Cutters.
  • 1/4Inch Shank Diameter, 2 Flutes, H-Si Coated.
  • Tip Diamter: 1.0mm, Radius: 0.5mm, Flute Length:1-1/4Inch, Overall Length: 3Inch, Single Side Angel: 4.82Deg.
  • For CNC,Engraving machine, X Carving plywood, hardwood, acrylic, MDF etc.
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time.
Check Stock