Best End Mills Tool

Genmitsu 40pcs End Mills CNC Router Bits, 1/8\ Shank CNC Cutter Milling Carving Bit Set Including 2-Flute Flat Nose & Ball Nose End Mill, Nano Blue Coat & Titanium Coat CNC Bits, MC40A

• High Quality: The Genmitsu end mills are made of ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating /Titanium Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality..
• 2-Flute Spiral Flat Nose & Ball Nose End Mills -- Shank Diameter: 3.175mm, Cutting Diameter: 3.175mm, Cutting Length: 17mm, Overall Length: 38mm..
• Two End Mill Sets -- Shank Diameter: 3.175mm, Cutting Diameter: 0.8 - 3.0mm (0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.5/3.0mm), Cutting Length: 17mm, Overall Length: 38mm, with Nano blue and Titanium coating..
• Applicable Materials: Widely used in various materials including plastics, aluminum, circuit board, wood, as well as other precision parts processing. To learn more about how to choose the right bits to meet your needs, please find the Comparison Chart (CNC Bits Buying Guide) at the Product Guides and Documents Section below..
• Wide Compatibility: The MC40A end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized co....

HHIP 3900-1005 5-Piece R8 End Mill Holder Set, 3/16-3/4'

• 5 PC SET 3/16, 3/8, 1/2, 5/8, 3/4" DRAWBAR END THREAD: 7/16" -20.
• Hardened and ground For Bridgeport type milling machines.
• Hardened and ground. For double and single end mills (single end mils only for sizes over 5/8").
• 5 PC SET For Bridgeport type milling machines. DRAWBAR END THREAD: 7/16" -20.
• For double and single end mills (single end mils only for sizes over 5/8").

YG-1 E5023 Carbide Square Nose End Mill, Double End, TIALN Multilayer Finish, 30 Deg Helix, 4 Flutes, 2\ Overall Length, 0.140625\ Cutting Diameter, 0.1875\ Shank Diameter

• Double-end square end mills create sharp, unrounded cuts and have cutting edges on both ends for longer tool life.
• Suitable for general-purpose machining on steel, chromium-nickel steel, and malleable cast iron.
• Stub length increases the strength of the tool, making it less likely to break in the workpiece.
• Four flutes produce a better finish than fewer flutes.
• Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds, offering better heat resistance than uncoated finish, TiN coating, and TiCN coating.

Jarrow Tool Square End Carbide Mill Set (Pack of 5) - 1/4 End Mill for Alloy Steels/Hardened Metals – 4 Flute TiAlN Coated Square Nose Milling Set for CNC Machine Milling Tools

• A must-have for every machinist: square end mill are general purpose mills that create a sharp edge at the bottom of the slots and pockets of the workpiece. Jarrow Tool square mills are available in a pack of 5..

Jarrow Tool Square End Carbide Mill Set (Pack of 5) - 1/4 End Mill for Alloy Steels/Hardened Metals – 2 Flute TiAlN Coated Square Nose Milling Set for CNC Machine Milling Tools

• A must-have for every machinist: square end mill are general purpose mills that create a sharp edge at the bottom of the slots and pockets of the workpiece. Jarrow Tool square mills are available in a pack of 5..

LittleMachineShop.com 4 Flute Ball End Mill Set, High Speed Steel, 6 Piece (2903)

Rannb End Mill Cutter 1/16\ Cutting Dia 1/4\ Shank Dia 4 Flutes End Mill Drill Bit - 5pcs

• ⭐【Material】The end mills are made of High Speed Steel,high hardness,good wear resistance and durability..
• ⭐【Pack of 5pcs】Sold in pack of 5pcs of end mill cutters..
• ⭐【Good Design】 Large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
• ⭐【Applicable Material】Suitable for side milling, end milling, finish machining in carbon steel, alloy steel, die steel, tool steel, cast iron, and titanium.And Circuit boards,Metal,Majority of plastics, Wood, Fibre glass, Carbon and environmental board..
• ⭐【Heat Treatment Process】The High Hardness Steel go through the heat treatment process so the end mill is more durable. Reduce changing times and improve the production efficiency..

LittleMachineShop.com #3 Morse Taper End Mill Holder Set, 5 Piece (1636)

• Set of five 3 Morse taper end mill holders.
• Compatible with Mills with 3 Morse Taper Spindle.

LittleMachineShop.com R8 End Mill Holder Set, 5 Piece (1258)

• Set of five R8 end mill holders from 3/16" to 3/4".

Kodiak Cutting Tools L3-OFFT-21LF USA Made Micrograin Carbide Ball Nose End Mill Set, 4 Flute, 1/8\ to 1/2\ (Pack of 6)

• Contains Kodiak Cutting Tools brand premium quality USA made ball nose solid carbide end mills.
• 4 flute ball nose end mills are center cutting and made from premium sub-micrograin carbide.
• Stub length end mills for extra rigidity.
• Fitted wood block stand included and each size comes in a marked plastic tube.
• Contains 1pc of each diameter: 1/8, 3/16, 1/4, 5/16, 3/8 and 1/2.

YG1 E5G97911 | 1/4x1/4x5/8x2-1/2 AluPwr 3FL HP Carbide Corner Radius End Mill

• Corner radius end mills have cutting edges with rounded corners to reduce chipping and provide longer tool life.
• Four flutes produce a better finish than fewer flutes.
• Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures.
• Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds.
• Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling.

Genmitsu 6pcs 3-Flute Square End Mill for Aluminum Applications, Nano Blue Coat CNC Router Bits, High Feed U-Type Design, for Roughing and Finishing, 1/4’’ Shank, SN06A

• High Quality: The Genmitsu end mills are made of Tungsten Carbide Steel and 0.2um ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating provides high hardness and heat resistance enabling the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality..
• Cost-Effective: Coming with 6pcs of the 3-Flute Square End Mill, Shank Diameter: 1/4’’ (6.35mm), Cutting Diameter: 5mm/6mm , Cutting Length: 15mm/20mm, Overall Length: 50mm/55mm..
• Versatile: Surface finishes are greatly improved no matter if you are roughing or finishing due to effective chip removal.
• Cut faster thanks to superior Material Removal Rate (MRR) especially when slotting..
• Applicable Materials: High feed U-type design makes these cutters ideal for working with aluminum and copper alloy.
• Attain excellent production rates thanks to the strong tooth with double relief angles..
• Wide Compatibility: Genmitsu SN06A Square End Mills are compatible with most desktop CNC machin....

wolfcraft 6901000 1 Parallel milling Guide, Multicolored

• Parallel milling stop Suitable for items up to 40 mm thick for end mills up to 27 mm wide. For use solely with Master Cut 2000 and Master Cut 1500 items. Wolfcraft stop with precision adjustment..
• For perfect results, it is possible to adapt to the size of the end mill using an adjustable stop. The parallel milling stop can be mounted safely without any tools using controls. Clever connection for suction of dust. Large items should be supported by a roller stand (e.g. ref. 6102300, weight 2.8 kg, 10-year *).
• Rotary knobs and adjustable stop for quick, tool-free fastening to the tabletop.
• Adjustable stop for adapting to milling cutters up to a diameter of 27 mm ..
• Connection for commercially available vacuum cleaner for dust-free working.