Categories

Best End Support Bearing

ARB 750001 Competition Differential Cover for DANA 50/60 ideal for increasing the rigidity of the whole axe and protect the differential and ring and pinion set from any off-road hazards

  • ... BEST ARB DIFFERENTIAL COVER OF ALL: Computer-optimized cross brace design increases the structural rigidity of the whole axle / Unique dipstick/filler cap design allows differential oil level to be adjusted for customized high driveline angles / Prolonged carrier bearing life due to extra support to the bearing alignment / Top-quality, high-power neodymium magnets are used in both the drain plug and the dipstick to collect metallic wear particles as the vehicle moves.
  • ABOUT ARB 750001 COMPOSITION: Made from ‎Super Thick Cast Nodular Iron, the engineering of the cover will prolong carrier bearing life because of the added strength to the bearing alignment. The dipstick/filler cap allows the differential oil level to be adjusted..
  • HOW IT OPERATES: High-powered neodymium magnets are attached to the drain plug. The dipstick collects the metallic wear particles. The magnet's location on the end of the dipstick allows the oil to be checked.
Check Stock

TOP YO 5 Cut Yo-Yo Bearing - Stainless - Size C YoYo Replacement Bearing -Single

  • This bearing surface has 5 different and is designed to keep your string where you want it..
  • The concave surface of this bearing is actually made up of several planes designed to gather the string at the center of the bearing.
  • Get high-end play without paying a high-end price..
  • These bearings offer a smooth long spin and make the perfect upgrade for any size C bearing yo-yo!.
Check Stock

H-Beam Connecting Rods for Toyota Supra MK4 2JZ-GE 2JZ-GTE 2JZ

  • Double honed bearing surfaces provide absolute reliability at high RPM.
  • Increased wrist pin lubrication with double drilled small end.
  • Specially designed side scalloping vent slots on large end to maximize rod bearing lubrication.
  • Includes connecting rod, crank pin, crank pin bearing, thrust washers, and wrist pin bearing for two strokes.
Check Stock

Michigan Motorsports LS1 Rocker Arms with upgraded Bronze Bushing Trunion Kit 4.8 5.3 5.7 6.0 LS1 LS2

  • ...bility of debris from a bearing failure that can cause severe engine damage. Our special C932 bushing material is bathed in oil via grooves at 2 different locations on the trunnion..
  • These channels constantly feed oil to the bushing surface ensuring proper lubrication. The greater surface of our bushed trunnion will support 300 times more load than a needle bearing trunnion. Our bushing gets more lubrication and has less load applied to it than the bushing in the small end of a connecting rod, giving it long service life..
Check Stock

PawHut Dog Crate Furniture with Cushion, Wooden Dog Kennel End Table with Lockable Door, for Miniature Dogs, Indoor, Walnut

  • CUSHIONED INSIDE: Ensure a supremely comfortable, bedded interior with a soft cushion. Featuring a removable washable cover that zippers on and off, this furniture style dog crate caters to cleanliness upkeep..
  • OPEN WINDOWS: The windows feature single railings instead of cross-hatching to make it easy to see out of the wood dog crate..
  • END TABLE: Place anything from drinks to TV remotes down on top of the flat surface. Featuring coffee table functionality, the dog kennel end table can serve as wooden furniture. The natural wood grain and rattan half-walls provide a serene, decorative style..
  • LOAD-BEARING: With great load-bearing on top, this dog kennel table will hold plenty of items. The strong support gives you furniture that's suitable for everyday use..
  • DOG CRATE TABLE INFORMATION: Overall Dimensions: 23.5" L x 19.75" W x 23.5" H. Interior Dimensions: 22.25" L x 18.5" W x 19" H. Suitable for miniature-sized dogs up to 13 lbs. in weight, less than 15.75" in body length. Assembly required..
Check Stock

VCT Rear Axle Bearing Remover Puller Slide Hammer Set Remove Semi-Floating

  • EASY TO USE: Slide flat end of puller through center of bearing and flat against backside of bearing, then slide washer down the center of the shaft against front side of bearing and tighten the nut on smaller end of puller, then thread a slide hammer (not included) to the puller and slide hammer back and forth until the bearing comes out.
  • The washer captures the bearing firmly to distribute the applied force over the entire bearing and prevent damage.
  • Use the VCT Pneumatic SAE Standard Rear Axle Bearing Puller 3-Piece Service Set – Domestic Car Vehicle Bearings Removal Tool Kit to service semi-floating rear axle bearings on your vehicle.
  • These tools make the job simple and prevent damage to your bearings when pulling.
  • Much easier than claw-type axle bearing pullers that slip off and chew up the old bearings.
  • For removal only, not intended for installation.
  • FITS YOUR CAR: Standard SAE sizes work for most American domestic makes and models.
  • Set includes the following sizes to fit main bearing tube – 1 inch to 1-7/8 inches, 1-5/16 inches to 2-3/8 inches, and 1-3/8 inches to 2-7/8 inches.
  • Sizes permanently laser-etched on tool for easy identification.
  • Each tool fits a basic slide hammer with a 5/8-inch x 18 thread pitch.
Check Stock

Bones Super Swiss 6 Skateboard Bearings 8 Pack

  • BRAND DEEPDREAM: Created using the highest precision German manufacturing techniques to be the most precise bearing in the world.
  • TOP QUALITY AT LOW END PRICES: DEEPDREAMgo head to head with Bones Swiss Bearings and are built for racing and durability at a fraction of the cost..
  • PREMIUM STEEL: The steel used for DEEPDREAMis the highest end steel available in the world. The precision and smoothness of their spin can not be matched by any other bearing..
  • Dimensions suitable for use in such applications as skateboards bearing , inline skates, and scooters.
  • HASSLE-FREE MONEY-BACK GUARANTEE: Designed to last longer than any other bearing on the market. If for any reason you are not 100% satisfied, please return your DEEPDREAMfor a no-questions asked, full refund.
Check Stock

M30 IPE KV100 Pro V2.0 MAD COMPONENTS Drone brushless Motor for Heavy Multirotor Quadcopter Hexrcopter RC DIY

  • More efficient and drawing more power than equivalent motors in the market.
  • Precise manufacturing workmanship, perfect winding, absolutely compete with top brands.
  • This large drone brushless motor was designed for rigorous conditions and endurance flight, IP44.
  • 1 x Double row angular contact ball bearing 1 x Tapered Roller Bearing,Over-sized durable bearings for increased life, durability Support 12-16S.
  • Pay attention the extened wire =70mm. high end heavy lift industrial drone use, max thrust 49kg @60V with 40in prop..
Check Stock

Bont Skates - Aluminum Bearing Press Puller - Fits up to 125mm Wheels - Inline Speed Skating Racing Scooter

  • ✓ The Bont 125mm Inline Skate Wheel Bearing Press is recommended for any skater who frequently changes bearings. One end serves to press bearings into your skate wheels, while the opposite end allows for easy bearing removal.
  • ✓ Getting bearings in and out of wheels that use aluminum hubs is not easy, so Bont has developed a larger bearing press that is designed for 100mm, 110mm, and 125mm inline skate wheels.
  • ✓ Made from 6061 aluminum and steel the Bont bearing press is build to last.
  • ✓ This inline bearing press can be used with any brand of inline speed skating wheels, plus scooter wheels, skateboard wheels and roller skate wheels.
  • ✓ The maximum wheel dimesion is 125mm and makes it easy to insert and remove 608 and 688 bearings from your inline skate wheels.
Check Stock

OwnMy Heavy Duty Adjustable Leveling Feet Hexagon Nuts Lock Furniture Legs Levelers for Furniture, Table, Cabinets, Workbench, Shelving Units and More

  • Heavy Duty adjustable leveler feet can level your uneven floor or furniture easily. Let's get rid of a wobbly table. Can adjust level in your need to avoid furniture be corrode in damp.
  • More Stability -The lip on the bottom design so the weight can be scattered, helps with the overall support isn't bearing totally on the screw connections.
  • With black rubber feet caps for grip, keep it solidly in place and not to damage your flooring, also protect from moisture. each leveler has a load-bearing capacity of 2000 pounds.
  • Perfect for cabinets, tables, workbench, support table or shelving units for a busy work area or garage, etc. Package includes: 4 x furniture feet, 16 x Screw, 1 x hex wrench, 1 x open-end wrench..
  • Dimension:M10 Thread, adjusts height from 0" to 2" feet caps Diameter:34mm.
Check Stock

SFU2005-600mm Ballscrew Kit + 1Pcs BK/BF15 End Support, Ball Screw RM2005 20mm Length 600mm(23.6 inch) Pitch 5mm with End Machined

  • SFU2005 with end Machined ballscrew Length 600mm(23.6inch) with nut+BK15/BF15 end support..
  • The antibacklash ballscrew material is bearing steel, the ballscrew support seat surface is electroplated processing, surfacing smooth and beautiful..
  • SFU2005-600mm ballscrew, low frictional loss, high transmission efficiency, manufactured under strict control of temperature and humidity..
  • C7 standard, precision is assured because of thorough quality control system, minimum starting torque, able to apply high speed and micro-feeding.Above average axial stiffness..
  • The ballscrews apply for electronic machinery robot, measuring instruments, medical equipment, factory automation equipment, CNC machine, machine tools..
Check Stock

Yellow Jacket Premium Scooter Bearings, Kick Scooter, 608, ABEC 11, Yellow Jacket (Pack of 4)

  • BRAND NEW YELLOW JACKET STINGERS: Created using the highest precision German manufacturing techniques to be the most precise bearing in the world.
  • PREMIUM STEEL: The steel used for Yellow Jacket Stingers is the highest end steel available in the world. The precision and smoothness of their spin can not be matched by any other bearing..
  • YELLOW JACKETS UNIQUE COLOR SEALS: As always the stingers come with 7 different color seals for customization and protection from dirt, rocks, dust, to lengthen the life of the bearing and maintain precision.
  • TOP QUALITY AT LOW END PRICES: Yellow Jacket Stingers go head to head with Bones Swiss Bearings and are built for racing and durability at a fraction of the cost..
  • HASSLE-FREE MONEY-BACK GUARANTEE: Designed to last longer than any other bearing on the market. If for any reason you are not 100% satisfied, please return your Yellow Jacket Bearings for a no-questions asked, full refund.
Check Stock

Prox Racing Parts 03.1334 Connecting Rod Kit

  • ProX connecting rod kits are made out of the toughest alloys available today.
  • Original equipment specifications and tolerances are meticulously maintained.
  • Complete with crankpin, big-end bearing, top-end bearing and thrust washers.
  • ProX connecting rods have a special surface treatment to improve strength and increase fatigue durability.
Check Stock