Categories

Best Ender Marker

WINSINN 40mm RGB Fan 24V, Ender 3 Fan Upgrade 24 Volt Fans LED Colorful 4010 Hydraulic Bearing, Works with Ender 3 Pro 3X CR-10S (Pack of Pcs)

  • ✔️WINSINN 40mm RGB fan which micro size and lightweight design, fast and stable cooling, colorful when it works, bringing you unparalleled experience. So many 3D Printer and DIY enthusiasts are full of praise for it, and it will also be your best choice. The working voltage is 24V, which perfectly compatible a various 3D printer extruder / hotend / nozzle or any DIY cooling and narrow place..
  • ✔️High quality Hydraulic Bearings, 2-years Warranty. Balance price and performance, suitable for daily use, life: 35,000 Hours..
  • ✔️Rated Voltage: DC 24V, Current: 0.05A, Power: 1.2W, Speed: 5000PRM, Air Pressure: 2.31mmH₂O, Airflow: 5.56CFM, Noise: 22.6dBA.
  • ✔️WINSINN 40mm RGB fan 24v which perfect for ender 3 fan upgrade. Fit for Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus (Installation Position for Motherboard) and Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus, Ender-6, CR-10 V2., CR-10 v3., CR-X, CR-X Pro, CR-10 Max, CR-10S Pro V2, CR-2020, CR-3040Pro (Installation Position for Nozzle).
  • ✔️Packing List: 4 x 40mm RGB Fan 24v, Connector & Line length: XH2.54 – 11.8in(300mm), Size: 40mm x 40mm x 10mm.
Check Stock

3D Parts Heater Bed of Ender 3 / Ender 3 Pro 3D Printer Replacement Parts Aluminum MK3 Heatbed Hotbed Platform with Heated Bed Cable Line for Ender 3 V2/ Ender-3 /Ender 3 Pro

  • Ender 3 Replacement Heater Bed DC 24V 220W with Cable Installed for Creality 3D Printer Ender 3/Ender 3 Pro / Ender 3X.
  • Original 3D Printer Ender 3 Replacement Parts / 3D Printer Accessories for Ender 3 / Ender 3 Pro / Ender 3X.
  • Ender 3 Pro Hotbed with Cable Which be Installed Well. Build Surface with 3M Adhesive which easily to stick on the heater bed platform..
  • 3D Printer Ender 3 Replacement Heater Bed with Free Technical Support..
Check Stock

Original Creality Ender 3 V2 Filament Runout Sensor Smart Filament Sensor Break Detection Module Detector for Ender 3 pro Ender 6 CR-10S PRO CR10 V2 V3 Ender3 Max 3D Printer

  • Only used for 32bits motherboard like version 4.2.2, 4.2.7. Suitable for Ender 3/ Ender 3 V2/ Ender 3 pro / Ender 6 / CR-10S PRO/ CR-10 V2 V3/ENDER 3 MAX. But the installation bracket is only used for Ender 3 series, as Ender 6 and cr10s pro printer already have the sensor installation holes or bracket.
  • Independent Modularized Design: it is redesigned with new inner structure. The outer cover is frosted, making it stylish and unique.
  • Filament breakage detection device contains micro switch, using the principle of mechanical proximity switch, no friction, can ensure the smooth feeding of filaments..
  • Precise Detection: Blue LED indicates normal filament feed-in.
  • Blue LED turns off when filament runs out..
  • IMPORTANT: For Ender 3 V2, Ender 3 and Ender 3 pro, you need to flash your motherboard's firmware before using, about the firmware download way, please check the following description or the instrument in the pack. as Ender 6 and CR10S PRO printer's firmware has been setted with filament detection function, so you can use them directly..
  • Package: 1 filament detector sensor, 1 extended cable, 1 installation bracket(This bracket is only used for Ender 3 / V2 / Pro, Filament detection bracket or holes already set up in the Ender 6 and CR10S PRO).
Check Stock

Official Ender 3 V2 Heated Bed 3D Printer Replacement Hot Bed 220W 24V with Cable Compatible for Creality Ender 3 Ender 3 Pro Ender 3 V2

  • Official Creality Ender 3 V2 Heated bed with Aluminum Platform.
  • The Power of Creality Ender 3 Hot Bed is DC 24V 220W.
  • Frame of Ender 3 V2 Heat Platform Bed is 235X235X3mm.
  • Aluminum Ender 3 V2 Hot Bed with Cable Installed for Creality 3D Printer Ender 3, Ender 3 Pro, Ender 3 V2.
  • What you get: 1X Official Creality Ender 3 V2 Heater Bed with Assembled Cable.
Check Stock

Official Creality New Upgrade Motherboard Silent Mainboard V4.2.7 for Ender 3 Customized and Non-Standard Matching,Ender 3 Silent Mother Board

  • Creality new release silent motherboard V4.2.7 ，32bit, compatible with Ender 3..
  • Super quiet by TMC2225 drivers , Bootloader installed,copy the firmware file to a formated SD card with no other files in it. Turn off the printer and unplug the power cord. Insert the SD card & power cord, and turn on the printer. Wait 10s to complete the firmware updating process., easier to flash the firmware..
  • Thermal runaway protection is enabled. The Board is Optimized by Circuit, effectively solve Heating Problem..
  • Firmware comes pre-installed, pre-configured for the Ender 3, makes it totally plug & play..
  • This silent mainboard preinstalls the Ender-3 firmware. If you want to install it in your Ender 3 Pro/Ender3 v2/ Ender-5, need to flash the Ender 3 Pro/Ender 3 v2/Ender5 firmware..
Check Stock

SainSmart Large 3D Printer Enclosure, 20.9'' x 24.2\ x 28.9\

  • Consistent Temperature: The SainSmart 3D Printer Enclosure reduces heat losses and prevents external factors that might alter your prints, keeping the printing area at a consistent temperature, delivering stable and smooth printing results..
  • Noise & Dust Reduction: A enclosure helps to reduce the annoying fan noise while printing, making it more viable for home and school use. It also protects your printers from dust..
  • Safe to Use: The lining of enclosure uses pure aluminum film material, equipped with stainless steel supports, stable structure and a large space. Folding storage, easy to install and carry..
  • Better organize your printing area: the enclosure is equipped with multiple tool pockets and holders on each side, keeping your printing area clean and tidy..
  • With a large area measuring 73.5cm x 61.5cm x 53cm (20.9'' x 24.2" x 28.9"), this enclosure is compatible with Ender-3, Ender-3 Pro, Ender-3 V2, Ender-3 V2 Neo, Ender-3 S1 Pro, Ender-3 Max, Ender-3 Max Neo, Ender-5 Pro, CR-6 SE, CR-10, CR-10 Smart Pro..
Check Stock

Creality Ender 3 Glass Bed Upgraded Build Surface Plate, 235x235x4mm

  • No Edge Curling - 3D printer coated glass bed, molds could stick on bed firmly without glue, avoiding the issue of print edges curling. A necessary 3d printer upgrade parts..
  • No-indentation Printing - Upgraded Ender 3 glass plate has a much smaller CREALITY logo than older version, avoiding leaving logo indentations on molds surface during 3D printing..
  • Excellent Flatness - Improved 3D printer glass plate provides more flat and more smooth build surface than magnetic mat or pei sticker, ensuring high flatness for the bottom of model..
  • Super Convenient - Very easy to take off the model, no tools needed. This borosilicate glass bed could be fixed with middle sized clips and cleaned with alcohol or acetone at room temperature..
  • Compatibility - The 3D printer parts is applicable with Creality 3D printer Ender-3, Ender-3 Pro, Ender-3S, Ender-3X, Ender-3 V2, Ender-5, Ender-5 Pro and CR-20, CR-20 Pro, pls confirm if this borosilicate glass bed compatible with your printer..
Check Stock

UCHIDA Marvy Extra Fine Tip Le Plume II Double Ender Marker Pen Art Supplies, Teal

  • Double ender marker with extra fine brush tip.
  • It has acid free and non-toxic water based ink.
  • This is the ideal pen for your art or rubberstamping needs.
  • Make multi-colored impressions by using two or more pens on the rubber before stamping.
  • measures 1/2-inch length by 2-1/2-inch width by 9-1/3-inch height.
Check Stock

Official Creality Sprite Extruder Pro Upgrade Kit for Creality Ender 3/Ender 3 V2/Ender 3 Pro/Ender 3 MAX/Ender 3 S1/Ender 3 S1 Pro 3D Printers, Support Printing Flexible Filament, BL Touch/CR Touch

  • Compatible With Creality Ender 3 Series 3D Printer - Creality Sprite extruder pro is compatible with creality Ender 3, creality Ender 3 v2, creality Ender 3 pro, creality Ender 3 s1, creality Ender 3 max, creality ender 3 s1 pro, creality ender 3 s1 plus 3d printer...
  • All Metal Hotend Kit - All-metal Hotend Kit with heating block, titanium throat and cooling block, allows you to print high temperature materials at 300°C. This ender 3 v2 upgrades perfectly combine dual gear extruder and all metal hotend, enables all the Ender-3 series 3D printers a direct extrusion and high temperature printing conditions..
  • Large Torque, Extrusion Force Up to 80N - The use of gear with 3.5:1 gear ratio which perfectly matches with motor makes extrusion force up to 80N (depending on filaments). More precise control of feeding withdrawal..
  • Dual Gear Feeding, More Stable Printing -The ender 3 direct drive adapts double-toothed structure which does not damage filaments, allowing more reliable and stable feeding. With adjustable tensioner, allows you to fine-tune the pressure exerted by the drive gears onto the filament to print more exquisite m....
Check Stock

ANYCUBIC Vyper 3D Printer Auto Bed Leveling 3th Gen Upgrade FDM Metal FDM 3D Printers with TMC2209 32-bit Silent Driver Fast 3D Printing Large Build Size 9.6 x 9.6 x 10.2 Easy Assembly

  • 【After-sales Service】 Life-time professional technical supports,If you encounter unsolvable problems during installation and use, please feel free....
  • 【Easy to Install and Use】The kit contains 3 different mounting brackets and extension cords. You can easily install.
  • 【Product Durability】 Creality CR Touch is specially designed for 3d bed leveling for Creality 3d printers. Compared with BL Touch, it has stable....
  • 【Creality ideal companion】CR Touch works for Ender3 v2/Ender3/Ender3s/Ender3 Pro/Ender 3 Max/Ender5/Ender5 Pro/Ender5 s/ CR 10 with 32 bit....
  • 【Strong compatibility】CR Touch 3d printer auto leveling,Compatible with PEI / sticker bed / glass bed / metal bed.
Check Stock

3D Printer Creality Ender 3 v2 Neo New Upgrade Version with Auto-Leveling CR-Touch Stainless Platform Full-Metal Extruder 95% Pre-Installed Resume Printing 220x220x250mm

  • 【Upgraded Version】Pre-installed Ender-3 V2 Neo printer only 3 steps assembly requires. Friendly to users in the first step. 4.3 Inch UI user....
  • 【CR Touch Auto Bed Leveling】Upgraded CR Touch 16-point automatic bed leveling technology is more stable than the traditional BL touch leveling....
  • 【Full-metal Extruder】Different from Creality Ender 3 V2 3d printer, Ender-3 V2 Neo comes with the upgrade metal Bowden extruder, more durable,....
  • 【PC Spring Steel Platform】Different from ender 3, ender 3 pro, and ender 3 v2, this new-released FDM Ender 3 v2 Neo 3d printer comes with a....
  • 【Silent Motherboard】Ender-3 V2 Neo is equipped with the silent motherboard, which has stronger anti-interference, faster and more stable motion....
Check Stock

HICTOP Ender 3 Heater Cartridge 24V 40W for Creality Ender 3 Ender 3 Pro Ender 5 CR-10S Pro 3D Printer Prusa Mendel （Pack of 3）

  • ender 3 heater cartridge material : Stainless steel (304).
  • 24V heater cartridge voltage and power : 24V/40W..
  • Application of the 24v heater cartridge 40W: Creality ender 3, ender 3 Pro, ender 6 CR-10S Pro etc. 3D Printers Prusa Mendel.
  • Diameter of the ender 3 pro heater cartridge : 6mm. Length: 20mm,Wire Length:1M.
  • Temperature of the ender 3 V2 heater cartridge: It can take up to 280 ° C.
Check Stock

Comgrow Textured/Smooth Double Sided PEI Sheet 235mmx235mm for Creality Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 S1/Ender 3 S1 Pro/Ender 3 Neo/Ender 3 V2 Neo/Voxelab Aquila 3D Printer

  • ✔️ 【Simple Installation】✔️ The Ender 3 V2 PEI sheet is combined with 2 parts, a flexible steel platform textured PEI surface on one side, smooth PEI on the other side and a magnetic bottom sheet with adhesive on the back. Simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top..
  • ✔️ 【Excellent Adhesion】✔️ Excellent adhesion can be achieved when the temperature of the heated bed is about 60℃, you can print directly on each side of the double sided PEI sheet without using any glue or other tools to help the model to stick onto the sheet. You do not need to worry about the prints curling with a 60℃ bed temperature.It also can print PETG very well, but the temperature of the hotbed needs to be about 80-85℃..
  • ✔️ 【Wide Application】✔️ We use 75% thicker PEI and 25% thicker spring steel than our leading competitors. This means a more durable plate that can handle the tough conditions of 24/7 printing. Our magnet can also sustain higher temperatures of 120°C, making it perfect for materials like PLA, PETG, ABS, TPU, ASA, Nylon, and Polycarbonate!.
  • ✔️【Easy Removal】✔️ This surface is easily removed and flexible. Prints come off the surface easily wh....
Check Stock