Categories

Best Endmill Case

SpeTool Tapered Ball Nose End Mill 1/4\ Shank with 1/64\ Cutting Radius (1/32\ Diameter) for 3D Carving Engraving Router Bit, ZrN Coated

  • Tapered Ball Nose carbide EndMill / Cone Cutters with 1/4 Inch Shank 2 Flutes, ZrN Coated.
  • Ball Raidus: 1/64inch Flute Length: 1inch, Overall Length: 2-1/2Inch, Single Side Angel: 6.28.
  • The Tapered Carbide Carving bits suit For CNC,Engraving Carving 3D machine..
  • For HRC 55 Carving and machining hard wood, solid wood, partical board, plywood, stainless steel,titanium alloy etc.
  • High quality tungsten carbide and coat. Long service life and less wear..
Check Stock

SpeTool Tapered Ball Nose End Mill 1/4 Shank with 1/32 Cutting Radius 1/16 Diameter for 3D Carving Engraving Router Bit ZrN Coated

  • Tapered Ball Nose carbide EndMill / Cone Cutters with 1/4 Inch Shank 2 Flutes, ZrN Coated.
  • Ball Raidus: 1/32inch Flute Length: 1inch, Overall Length: 2-1/2Inch, Single Side Angel: 5.38.
  • The Tapered Carbide Carving bits suit For CNC,Engraving Carving 3D machine..
  • For HRC 55 Carving and machining hard wood, solid wood, partical board, plywood, stainless steel,titanium alloy etc.
  • High quality tungsten carbide and coat. Long service life and less wear..
Check Stock

Kodiak Cutting Tools KCT150027 USA Made Solid Carbide End Mill for Aluminum High Performance 45 Degree Helix, 3 Flute, Long Series, 1-1/4\ Length of Cut, 3\ Overall Length, 1/4\ Diameter

  • Premium Sub-Micrograin Carbide End Mill Made In the USA.
  • 1/4" Shank Diameter, 1-1/4" Length of Cut.
  • 3" Overall Length Center Cutting Carbide Endmill.
Check Stock

F&D Tool Company 14496-A1610R Shell End Mills for Steel High Speed Steel 1.25 Diameter 1 Width of Face 1/4 Width of Drive Slot 5/32 Slot Depth 1/2 Hole Size

  • Shell Endmills - For Steel - High Speed Steel.
  • Dia - 1 1/4 WOF - 1 WODS - 1/4 Depth - 5/32 Hole - 1/2.
Check Stock

SpeTool 12501 2 Flutes Carbide CNC End Mill For Aluminum (1/4 Shank, 2.5 inch Long) Router Bit Spiral Mill

  • Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 3/4 inch Cutting Length, 2-1/2 inch for Total Length.
  • The EndMill With Flat Top, 2-Flutes, Large Chip Pocket, Easy Chip Removal..
  • For Aluminum, Non-ferrous Metal, Plastics, Plywood, OAK, MDF, and Any Hardwood Working and Long service life for sharp.
  • The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
  • End Mill Bits are Suitable for Slot Machining, Side Face Machining, Hole Machining. Please Adjust the Speed, Feed and Cutting Depth According to Actual Cutting Conditions..
Check Stock

F&D Tool Company 14515-A1619L Shell End Mills for Steel High Speed Steel 2.375 Diameter 1.625 Width of Face 3/8 Width of Drive Slot 7/32 Slot Depth 1 Hole Size

  • Shell Endmills - For Steel - High Speed Steel.
  • Dia - 2 3/8 WOF - 1 5/8 WODS - 3/8 Depth - 7/32 Hole - 1.
Check Stock

F&D Tool Company 14507-A1615L Shell End Mills for Steel High Speed Steel 1.875 Diameter 1.375 Width of Face 5/16 Width of Drive Slot 3/16 Slot Depth 3/4 Hole Size

  • Shell Endmills - For Steel - High Speed Steel.
  • Dia - 1 7/8 WOF - 1 3/8 WODS - 5/16 Depth - 3/16 Hole - 3/4.
Check Stock

SpeTool 5Pcs 2-Flute Square Nose Carbide End Mill 1/8 Inch Router Bit with 1/8 inch Shank CNC Machine Tools, TiAlN Coated

  • ENDMILL SIZE. 1/8" shank, 1/8" cutting diameter, 1/2" cutting length, 1-1/2" over all length.
  • SPECIFICATION. Flat top, 2-flute, HRC55 with tialn coated, use 1/8" collet.
  • PREMIUM QUALITY. Made of high quality tungsten carbide, precision edge-grinding technology.
  • excellent cutting results and enhanced productivity.
  • WIDE APPLICATION. For cnc, engraving machine, carbon steel, mould steel, inconel, stainless steel, titanium alloy etc.
  • suitable for side milling, end milling, finish machining, etc..
  • PACKAGE INCLUDE. 5 pieces high quality end mill pack in a individual plastic box.
Check Stock

F&D Tool Company 18383-F912 Multiple Flute End Mill, Single End, Extra Long, High Speed Steel, 3/8\ Mill Diameter, 3/8\ Shank Diameter, 2.5\ Flute Length, 4.25\ Overall Length, 4 Number of Flutes

  • Multiple Flute Endmill - Single End - Extra long - High Speed Steel.
  • Mill Diameter: 3/8 - Shank Diameter: 3/8 - Flute Length: 2 1/2 - Overall Length: 4 1/4 - Number of Flutes: 4.
  • Regularly furnished with right hand cut and right hand spiral.
Check Stock

SpeTool 1/4 Shank Carbide End Mill for Aluminum Cut (3 Flutes, 3.5 inch Long) Non-Ferrous Metal Upcut CNC Spiral Router Bit

  • Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 1-1/2 inch Cutting Length, 3-1/2 inch for Total Length.
  • The Route Bits With Flat Top, 3-Flute, Upcut For Easy Chip Removal And Perfect Surface Finish. Clockwise Motion for Machining..
  • For Aluminum 6061,7075 etc. Non-ferrous Metal, Plywood, OAK, MDF, and Any Hardwood Working and Long service life for sharp.
  • The Carbide EndMill Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

SpeTool 5PCS 2 Flutes Square Nose End Mill Set Power Milling Machine Carbide Upcut CNC Router Bits Tiain Coated, 1/4 inch Shank, 2 1/2 inches Long Overall

  • Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 3/4 inch Cutting Length, 2-1/2 inch for Total Length.
  • Flat Top with 2-Flute, Material: Solid Carbide with TiAlN Coated for HRC 55.
  • For CNC Machine.Cutting Steel, Metal, Inconel, Stainless Steel, Titanium Alloy etc.
  • The Endmill Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

SpeTool Extra Long End Mill for Aluminum 5/16in CNC Router Bits Metal Cutter 3-Flute Tools, 1-5/8in Flute Length, 4in Overall Length

  • Solid Carbide Spiral Router Bit with 5/16 inch Shank and 5/16 inch Cutting Diameter, 1-5/8 inch Cutting Length, 4 inch for Total Length.
  • The Route Bits With Flat Top, 3-Flute, Upcut For Easy Chip Removal And Perfect Surface Finish. Clockwise Motion for Machining..
  • For Aluminum 6061,7075 etc. Non-ferrous Metal, Plywood, OAK, MDF, and Any Hardwood Working and Long service life for sharp.
  • The Endmill Suit for CNC Router and Brand Plunge Router with 5/16" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

SpeTool 3 Flute Carbide End Mill for Aluminum Non-Ferrous Cutting Tool Upcut Bit for CNC Machine, 1/2 Inch Shank, Extra Long 4 Inch

  • Solid Carbide Spiral Router Bit with 1/2 inch Shank and 1/2 inch Cutting Diameter, 2 inch Cutting Length, 4 inch for Total Length.
  • The Route Bits With Flat Top, 3-Flute, Upcut For Easy Chip Removal And Perfect Surface Finish. Clockwise Motion for Machining..
  • For Aluminum 6061,7075 etc. Non-ferrous Metal, Plywood, OAK, MDF, and Any Hardwood Working and Long service life for sharp.
  • The Carbide EndMill Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/2" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock