Categories

Best Engine Bearing Kit

TIGERSGATE Inner Camshaft Bearing Installer Tool & Remove Puller (M8) for Harley Milwaukee Eight Engine

  • Fitment: Our kit is designed to fit Harley Davidson 2017-2022 Milwaukee Eight Engine (M8), as well as all twin cam engines, making it a versatile addition to your toolkit..
  • Easy to Use: This kit is specially designed to help you replace the inner camshaft needle bearing on M8 engines with ease. The visible hole on the support plate makes the process much easier, while the precise accuracy of the bearing puller and installation tool ensures a perfect fit..
  • Protect Bearing: Securely holds needle bearings in place and prevents them from falling into the crankcase during removal with its specialized design safely installs bearings by applying pressure only to the outermost diameter, avoiding damage to the bearing, cam, or case..
  • Premium Quality: Made from high-stiffness steel, this kit is built to last with long-lasting durability and resistance to breakage. The powder-coated finish provides a clean surface that is resistant to corrosion and rust..
  • Excellent Customer Support: This kit comes with a puller, an installer, a docking tool, a support plate, a threaded bolt, a washer, a ....
Check Stock

DNJ EK1105M Master Engine Rebuild Kit for 2002-2003 / Dodge, Jeep/Liberty, Ram 1500/3.7L / SOHC / V6 / 12V / 226cid / VIN K

  • THIS KIT INCLUDES: Piston Set, Piston Ring Set, Balance Shaft Bearing Set, Main Bearings Set, Rod Bearings Set, Head Gasket Set, Lower Gasket Set, Thrust Washer, Freeze Plug Set (Brass), Timing Chain Kit, Oil Pump.
  • FITS: 02-03 Dodge, Jeep / Ram 1500, Liberty 3.7L V6 SOHC Naturally Aspirated.
  • FITMENT NOTES: w/ Oil Pump & Timing Belt Or Timing Kit If Applicable, Master Kit Engines w/ Stamped Steel Valve Covers, Master Kit, w/ Steel Valve Covers.
  • You are assured to receive a worldwide proven Master Engine Rebuild Kit quality part with OE quality fit and performance..
  • IMPORTANT: This Engine Kit is in STANDARD SIZE in all of its components. If you need oversized Pistons, Piston Rings, Rod Bearings or Main Bearings, send us a message prior ordering, indicating the correct size you need, so our customer service team can confirm availability. If we do not receive communication from you, everything will be sent in STANDARD SIZE by default.
Check Stock

Wiseco PWR119-104 Garage Buddy Complete Engine Rebuild Kit

  • Fits: Kawasaki KX85 2001-2005, with 48. 5mm Piston Bore.
  • Wiseco's Garage Buddy complete engine rebuild kit offer everything you need for a bottom and top end rebuild with everything included in one box.
  • Wiseco crankshafts are designed completely by in-house engineers, who determine all assembled dimensions, clearances, materials, and specifications.
  • Garage Buddy kits come with a Wiseco standard forged piston, which offers stock compression and more reliability and longevity, thanks to the benefits of the forging process.
  • Includes: Crankshaft assembly, OEM quality main bearings, All engine gaskets, seals, and O-rings, Wiseco standard series forged piston kit (piston, ring(s), pin, clips), Small end bearing (for two-strokes), Cam chain (for four-strokes), and Hour meter with mounting bracket and hour meter decal.
Check Stock

DNJ EK715E Engine Rebuild Kit for 2006-2011 / Subaru/Forester, Impreza, Legacy, Outback / 2.5L / SOHC / H4 / 16V / 2458cc / EJ253

  • THIS KIT INCLUDES: Piston Set, Piston Ring Set, Main Bearings Set, Rod Bearings Set, Full Gasket/Sealing Set.
  • FITS: 06-11 Subaru / Impreza, Forester, Legacy, Outback 2.5L H4 SOHC Naturally Aspirated EJ253.
  • FITMENT NOTES: w/o Oil Pump & Timing Belt Or Timing Kit, w/o Upper Int. Set, Rod Bearing w/ 52mm Journal.
  • You are assured to receive a worldwide proven Engine Rebuild Kit quality part with OE quality fit and performance..
  • IMPORTANT: This Engine Kit is in STANDARD SIZE in all of its components. If you need oversized Pistons, Piston Rings, Rod Bearings or Main Bearings, send us a message prior ordering, indicating the correct size you need, so our customer service team can confirm availability. If we do not receive communication from you, everything will be sent in STANDARD SIZE by default.
Check Stock

Engine Camshaft Kit 038109101AH Replacement for 2005 2006 VW Jetta MK5 1.9L TDI BRM FWD 038145215 038109309C 038103714G 038103673CGLB AKWH

  • This Kit Includes: 1x Camshaft: 038109101AH, 038-109-101-AH | 1x Power Brake Booster Vacuum Pump Gasket: 038145215, 038-145-215 | 8x Engine Camshaft Follower (Lower): 038109309C, 038-109-309-C, 038109309A | 10x Rocker Shaft Bolt: 038103714G, 038-103-714-G, 038103714 | 10x Engine Camshaft Bearing: 038103673CGLB, 038-103-673-C-GLB, 038103673BGLB.
  • Replacement for 2005 2006 Volkswagen Jetta 1.9L TDI DIESEL A/T M/T Sedan.
Check Stock

Valeo 52151203 Solid Flywheel Conversion Kit Compatible with Select Mini Cooper Models, 2002-2008

  • The same installation time as a Dual Mass Flywheel kit - no special tools required..
  • All new components provide better thermal resistance and full engine gearbox protection.
  • The lightweight kit increases torque transfer efficiency and reduces torsional stress on the crankshaft.
  • Notably reduces the cost of repair when compared to the DMF Kit.
  • Kit contains everything needed to complete the job: Rigid flywheel, flywheel bolts, long travel damper disc, cover assembly, pressure plate bolts, release bearing or CSC and centering tool (available for most popular items).
Check Stock

Valeo 52285615 Solid Flywheel Conversion Kit Compatible with Select Audi and Volkswagen Models

  • The same installation time as a Dual Mass Flywheel kit - no special tools required..
  • All new components provide better thermal resistance and full engine gearbox protection.
  • The lightweight kit increases torque transfer efficiency and reduces torsional stress on the crankshaft.
  • Notably reduces the cost of repair when compared to the DMF Kit.
  • Kit contains everything needed to complete the job: Rigid flywheel, flywheel bolts, long travel damper disc, cover assembly, pressure plate bolts, release bearing or CSC and centering tool (available for most popular items).
Check Stock

BLACKHORSE-RACING 14" Universal Electric Radiator Cooling Fans + Thermostat Relay & Mount Kit

  • √ COOLING FAN: 12V 90W 14 Inch radiator engine cooling fan with mount brackets and tie straps kit. Maximum Fan CFM=900CFM, Maximum Fan RPM=2000+10% RPM.Fan Diameter: 14.72".Thickness=2.64"..
  • √ THERMOSTAT KIT: 180'F turn-on temperature, 165'F turn-off temperature. 3/8" NPT thread-in brass probe w/ 1/2" NPT adapter included.
  • √ DESIGN: Slim design provides excellent engine bay clearance.Good heat resistance and corrosion resistance ensure a long service life for the electronic radiator.Blade and wiring can be reversed to make the fan an air pusher..
  • √ HIGH TORQUE MOTOR: Features sealed ball bearing and fully balanced blades that ensure low noise levels and long life of smooth operation.
  • √ Application: Universal,For radiators, oil coolers, transmission coolers, condensers and more..
Check Stock

DNJ EK330M Master Engine Rebuild Kit for 1998-2003 / Chevrolet, GMC, Isuzu, Pontiac/Cavalier, Hombre, S10, Sonoma, Sunfire / 2.2L / OHV / L4 / 8V / 134cid, 2180cc / VIN 4, VIN 5, VIN H

  • THIS KIT INCLUDES: Piston Set, Piston Ring Set, Main Bearings Set, Rod Bearings Set, Full Gasket/Sealing Set, Freeze Plug Set (Brass), Cam Bearings, Timing Chain Kit, Oil Pump.
  • FITS: 98-03 Chevrolet, GMC, Pontiac, Isuzu / S10, Sonoma, Cavalier, Sunfire, Hombre 2.2L L4 OHV Naturally Aspirated.
  • FITMENT NOTES: w/ Oil Pump & Timing Belt Or Timing Kit If Applicable, Master Kit, w/ Different Tang Location On #3 Position Bearing.
  • You are assured to receive a worldwide proven Master Engine Rebuild Kit quality part with OE quality fit and performance..
  • IMPORTANT: This Engine Kit is in STANDARD SIZE in all of its components. If you need oversized Pistons, Piston Rings, Rod Bearings or Main Bearings, send us a message prior ordering, indicating the correct size you need, so our customer service team can confirm availability. If we do not receive communication from you, everything will be sent in STANDARD SIZE by default.
Check Stock

Inner Camshaft Needle Bearing Installer Tool & Remover Removal Puller Fit For 2017-2022 Harley Davidson Milwaukee Eight Engine (M8)

  • ...Ultra Limited Low, 2017+ Harley Ultra Limited, 2017+ Harley Tri Glide, 2017+ Harley Street Glide, 2017+ Harley Softail, 2017+ Harley Road King, 2017+ Harley Road Glide, 2017+ Harley Freewheeler, 2018+ Harley Fat Boy, 2018+ Harley Fat Bob, 2017+ Harley Electra Glide, 2017+ Harley Breakout..
  • APPLICATION: This camshaft bearing installer tool & remove puller fit for Harley Milwaukee Eight Engines (M8) models. Compatible with all Harley Davidson twin cam..
  • FUNCTION: The bearing puller is designed to grip the needle bearings and prevent them from falling into the crankcase. The installation tools are designed to press on the outermost diameter of the bearing, eliminating damage to the bearing, cam, or housing. The pressure adapter also sets the bearing to the proper depth..
  • FEATURES: The inner camshaft needle bearing installer tool & remover puller with special style collet and fine thread. Easy to install, the design holes can be suitable for the engine, and the installation progress can be checked..
  • MATERIAL: Made of heavy-duty steel with black powder-coated finished, prevent corrosion and rust, solid and durable. The kit includes 12 pieces, including a cam bearing plate, installer tools, puller tools, and thumb screws, as the picture shows..
Check Stock

Genuine Timing Belt Kit & Water Pump Compatible with Subaru Forester Impreza WRX 2008 2013 2014 OEM TKF-005

  • Applicable models: TKF-005 Timing Belt Water Pump Kit Compatible with Subaru Forester 2008-2013 Impreza 2008-2014 WRX 2013-2014 2.5L H4.
  • Includes: OE matched Belt Tensioner NTN, OE matched Idler Bearing and Tensioner Bearing NTN, NSK, KOYO or INA, OE matched Timing Belt MITSUBOSHI, UNITTA or GATES, OE matched Water Pump..
  • High Quality & Durability: OEM design and direct fit. Components are rigorously inspected and tested before delivery to ensure proper and efficient operation.Low noise, smooth running and less damage to your car for a quality experience for you.
  • Advise: The water pump and timing belt kit should be changed at an interval of 40,000 to 50,000 miles to prevent faults.
  • this will also save your time and money, as the labour involved in dissembling the engine to replace these parts is time-consuming, and can be expensive if carried out by a garage.
  • Satisfaction Service: Timing Belt kit products are sent out until you receive them, we will keep track of the logistics. If you have any questions, please feel free to contact us and we will get back to you within 24 hours!.
Check Stock

100cc 2-Stroke Bicycle Engine Kit Full Air-Cooling Motor Bike Modified Set Motorized Motor Bike Modified Tool offering Max Speed 48km/h

  • The bicycle engine kit contains the necessary items to turn your pedal bicycle into a motorized bicycle..
  • The 50mm diameter single-piece cylinder head increases the load-bearing capacity, reduces the working temperature and makes it easier to start..
  • The choke lever on the handlebar provides more fuel when the choke door is opened instead of restricting air, which is very suitable for cold weather..
  • This bicycle kit uses high-quality wear-resistant iron sleeve cylinders and enlarged cylinder heads, so that the machine has the effects of high....
  • Modifying a thick bike, you can stop or start the engine while riding..
Check Stock

Sealed Power 1404M Camshaft Bearing Set

  • 【Application】for Chevy G/M LS Engine, LS1, LS2,LS3,LS6, LQ9.
  • 【Cam Bearing Installation Tool】This tool is used to remove and install cam bearings. Professsional cam bearing tool for all LS based engines. This tool is a must when installing cam bearings in big block for Chevys..
  • 【Note】This is a must have for the LS engine builder, you can save time and money by installing your own cam bearings..
  • 【Using Our Cam Bearing Installation Tool】You can remove the old cam bearing and install the new cam bearing like a professional. Easy to install, which helps to keep the cam bearing in the correct position.
  • 【Durable】Made of 45# steel ,maximum durability, the total length is 33 inches, and the end is detachable..
Check Stock