Categories

Best Engine Block Sleak

Kat's Frost Plug Engine Heater - 1-3/4\ NPT (44.5 MM) 600 Watt w/ 120 Volt Farmer Bob's Parts K7FR

  • Freeze Plug Heater, also referred to as a block heater or frost plug heater is the most reliable and efficient way to pre-heat your engine. Operates by being directly submerged into coolant and heating the block. Most efficient and reliable way to pre-heat engine block..
  • 10609, 815705, GE24, K7FR, K962705, 11609.
Check Stock

EVIL ENERGY Fuel Filter Regulator 58 PSI Kit for LS Swap EFI Conversion

  • Function: Fuel pressure regulator filter used to create a returnless fuel supply for LS engine swaps and electronic fuel injection conversions. This bypass regulator passes excess fuel back into the tank so the pump can run freely..
  • Feature: The fuel filter regulator with 6AN adpater fittings for LS Swap delivers 58 PSI (4 BAR) to your fuel rail and returns unused gas to the tank, and build-in a 10 micron fuel filter ensures clean fuel is delivered to your engine, thus to protect the normal operation of the engine, reduce wear, avoid blocking, improve the purpose of engine life..
  • Compatible with: The fuel filter pressure regulator compatible with Chevrolet 1999-2014 V8 5.3L/325 Chevy small block Gen III/IV (LS-based engines), Chevrolet 1999-2014 V8 4.8L/294 Chevy small block Gen III/IV (LS-based engines), Chevrolet 1999-2014 V8 6.0L/364 Chevy small block Gen III/IV (LS-based engines). Please you check the part is your need before purchase..
  • Installation: fuel filter regulator kit for LS Swap EFI Conversion can be installed anywhere between the tank and the engine, although it is usually installed in the engine compartm....
Check Stock

Small Block Chevy Overhaul Gasket Set, 350 Chevy, 67-'85

  • Application Range: It fits 1957-1979 small block 283, 307, 327, 350 and 383 V8 engines with a 2 piece rear main seal and left hand oil pan dipsticks. It includes all the necessary gaskets and seals for one complete engine repair..
  • Application Range: It fits 1957-1979 small block Chevy 283, 307, 327, 350 and 383 V8 engines with a 2 piece rear main seal and left hand oil pan dipsticks. It includes all the necessary gaskets and seals for one complete engine repair..
  • Premium Quality: Gaskets provide a reliable means of repairng your engine for your daily street cruiser, tow vehicle, street rod, circle track, dirt track, and drag strip performance racing engines.
  • Gasket set includes the following pieces: Cylinder head gaskets, intake manifold gaskets, valve cover gaskets, exhaust manifold gaskets, timing cover gasket, timing cover seal, oil pan gaskets, water pump gaskets, fuel pump gasket, thermostat water outlet housing gaskets, distributor gasket, o ring valve stem seals, and rear main seal..
Check Stock

Rolling Engine Cradle Stand with Wheels, Fits Chevy V8 Small Block and Big Block, Steel Construction, Built in Hardware Storage, Easy Assembly

  • Rolling engine cradle stand is engineered to fit small block and big block Chevy engines.
  • Built in hardware storage for engine mount bolts while stand is not in use ensures you will always have the proper hardware when needed.
  • Premium steel construction for superior strength and maximum hold.
  • Lightweight engine cradle with wheels in a versatile design for easy engine mounting and installation.
  • Not compatible with 1955-1957 265 and 283 SBC engines since those engines do not have side engine mounts.
Check Stock

DBM IMPORTS Rolling Engine Cradle Stand Engine Dolly Ford v8 Style, 1000 lbs Capacity

  • Rolling engine cradle stand is engineered to fit FORD V-8 small block motors.
  • Premium steel construction for superior strength and maximum hold.
  • Lightweight engine cradle with wheels in a versatile design for easy engine mounting and installation.
  • Unit Dim L x W x H (in): 24-1/8 x20-1/8 x 18.
Check Stock

91018040 Engine Swap Weld-In Motor Mount Kit Compatible with Chevy Small & Big Block SBC BBC

  • 【COMPATIBILITY】 Universal engine mount compatible with Chevrolet Small & Big Block 350 396 454 Engine. SBC/BBC and 4.3L V6 engines..
  • 【FUNCTION】These brackets allow a LS series engine to be bolted into a vehicle that originally had a small block chevy engine with your existing mounts..
  • 【MATERIAL】Features polyurethane bushing for vibration free performance and long bushing life.
  • 【PERFORMANCE】4 9/5" tall weld on steel frame plates allow for customization to your specific chassis.
  • 【PACKAGE CONTENTS】2x Weld-In Motor Mount,2x Blots,4x Frame Plates .Please contact us if the package you received is missing parts..
Check Stock

Learn Numbers, Shapes and Colors at the Amusement Park with Max the Glow Train

  • Heated Engine: Help you start car quickly. In cold winter, use silicone heating pad to heat the engine and transmission before starting the car, reduce the consistency of the oil to keep the oil as a thin liquid, thus better lubricating the engine and reducing wear and tear, extending the life of the engine and transmission and starting the car quickly..
  • Replaces Block Heaters: Magnets do not work on aluminum oil pan, which is what most cars have. Oil pan heaters are suitable for both cast iron and aluminum engine oil pans.Economical and convenient solution..
  • High Quality Material: Made of high quality silicone, waterproof and oil-proof, the waterproof design of the silicone and power cord connection reduces the risk of short circuit. The hotter the upgraded silicone is the stronger the adhesion. Fast heating, then constant at 194 ℉ / 90℃, prevent the safety hazards caused by high temperature..
  • Easy to Install: Clean and dry the flat surface of the device, peel off the paper backing and apply the oil pan heater, using magnets/adhesives can extend the adhesion time (magnets and adhesives not included).
Check Stock

Engine Storage Stands Fits SBC/BBC Chevy V8

  • Two-piece design with each piece bolting to each side of the engine, unlike other traditional engine hoists & stands..
  • Solid welded steel construction, black powder coat finish for great looks and long life..
  • Fits small and big block engines such as 283, 307, 327, 350, 400, 427, 454, and V8..
  • Our engine stand uses four heavy-duty ball bearing casters for rolling the engine around the floor with ease..
  • Includes 2 engine mounting brackets, 4 caster wheels, and hardware to install the engine test stand..
Check Stock

Engine Down Live At Cat s Cradle 07/15/2004

  • Lightweight, compact design and and a terrific value for any budget.
  • Fits 1958 and newer small and big block Chevy engines (1955 to 1957 small block engines without side engine mounts do not fit this stand).
  • You can even leave the transmission attached.
  • Add the optional caster wheel set 91081139 to make it mobile.
  • 2-piece design for easy storage when not using to hold an engine.
Check Stock

Small Block Chevy Engine Storage Stand Cradle 750 lb Capacity

  • Engineered to fit small block and big block Chevy engines.
  • All four legs fold up for easy storage when stand is not in use.
  • Premium steel construction for superior strength and maximum hold.
  • Lightweight versatile design makes for easy engine mounting and installation.
  • Not compatible with 1955-1957 265 and 283 SBC engines since those engines do not have side engine mounts.
Check Stock

Zerostart 3400085 Silicone Pad Heater Engine Oil, Transmission Fluid, Reservoir and Hydraulic Fluid Heater, 6\ (15 cm) x 10¾\ (27 cm) | CSA Approved | 240 Volts | 1000 Watts

  • Most efficient and reliable way to pre-heat engine block. Operates by being directly submerged into coolant and heating the block. Applications are specific to part numbers. Also referred to as freeze plug heaters or block heaters. Installation requires mechanical ability..
Check Stock

Sealed Power 1204M Camshaft Bearing Set

  • FITS: 80-14 Chevrolet, GMC, Isuzu 3.8L-4.3L V6 OHV Naturally Aspirated.
  • FITMENT NOTES: One Set Services Complete Engine, w/o T" On Engine Block".
  • DNJ Engine Components is a full line provider of Domestic & Japanese engine parts for cars and trucks..
  • We carefully selected DNJ Engine Components as the sole provider. DNJ has a 30+ year track record of quality, experience, and trust. It makes sense for us to carry a brand that would help us earn customer loyalty in the long run.
Check Stock

Holley 550-511K EFI Self-Tuning Master Kit

  • Breathe new life into your Small Block Chevy or Big Block Chevy engine with this easy-to-install fuel injection/distributor ignition kit.
  • Throttle body mounted ECU – no extra computers to mount or relocate.
  • Self tuning ECU means you don’t have to be a computer/tuning expert to enjoy EFI.
  • Precision machined shutter wheel designed for improved accuracy at extreme engine RPM.
Check Stock