Categories

Best Engine Bore Gauge

Dial Indicator Bore Gage,35~50mm Precision Measuring Tool Professional Precision Inch Dial Bore Gauge Set,Measuring Range Measuring Tools(35-50mm)

  • 【Aluminum Alloy Dial Bore Gauge】Made of aluminum alloy material ,rust and corrosion resistant..
  • 【Dial Bore Gauge Set】A package including a dial bore gauge and measuring tip..
  • 【 0.01mm】High accuracy ,the resolution of the gauge is 0.01mm..
  • 【35~50mm Precision Measuring Tool】The dial bore gauge can measure a bore of 35~50mm..
  • 【Stable Indicator Bore Gauge】Convenient to use,good stability and saves effort..
Check Stock

6 Pcs 5/16\ to 6\ Telescopic Gauge Bore Gauge Telescoping Gage Set High Precision T Bore Hole Gauge Bore Measurement Tool

  • 【Easy to Adjust】This telescopic bore gauge set allow the most pinhole gauge on the retractable gauge to enter, can quick check holes, slots and recess up to 6" deep..
  • 【Bore Gauge Material】 The bore gauges are made of carbon steel with chrome plating on the surface.Telescoping Gage Set has nickel-plated finished and good side arc so that the product has a long service life..
  • 【Bore Gage Packing】Total 6Pcs cylinder bore gauges in a ethylene plastic bag, range: 5/16" - 6" (8mm to 150mm), (1 gage: 5/16 - 1/2" range x 4.20" overall.
  • 1 gage: 1/2 - 3/4" range x 4.40" overall.
  • 1 gage: 3/4 - 1-1/4" range x 4.40" overall.
  • 1 gage: 1-1/4 - 2-1/8" range x 5.85" overall.
  • 1 gage: 2-1/8 - 3-1/2" range x 5.85" overall.
  • 1 gage: 3-1/2 - 6" range x 5.85" overall)..
  • 【Peration Method】 Use the small hole gauge to expand in the hole to be measured, lock it in place, and then take it down, and measure with bore micrometer or caliper to determine the final hole size..
  • 【Unique Design】 The spring tension of bore measuring tool ​gives uniform contact pressure, can detect the inner diameter in a hole (or groove).Spring of telescopic gauge loads with knurled locking knob and knurled holding area..
Check Stock

Husqvarna 581626993 3/8 Inch Pitch 0.058 Gauge 28 Inch X Cut Chainsaw Chain

  • A low kickback, low-vibration chain Developed to meet the specific needs of today's lightweight chainsaws.
  • 72 drive links, 3/8 in. Pitch, .050 in. Gauge, 7/32 in. Sharpener file size.
  • Fits 20 in. Husqvarna chainsaw models: 55 Rancher,257, 261, 262 XP,359, 455 Rancher,460, 460 Rancher, and 555.
Check Stock

Laser Bore Sight, 12 Gauge Shot Gun Red Dot Boresighter with 6 Batteries（2 Set Batteries）

  • Class IIIA laser, less than 5mW. Made to fit the 12 Gauge laser bore sight..
  • The laser bore sight is easy to use, can fast gun zeroing and sighting..
  • The bore sight made of sturdy brass construction, the boresighter is high quality..
  • The laser sight is easy to sit perfectly in the bore, reduce cartridges and shells wasted..
  • We provide with 2 sets (6 total) batteries for the 12 Gauge laser bore sight. Battery type is LR44/AG13..
Check Stock

Bore Hole Gauge, Bore Measuring Tool, Aluminum Alloy Industrial Measuring Inside Diameter Measuring Hole Measuring for Bore Measuring(35-50mm)

  • Convenient to use,good stability and saves effort..
  • The dial bore gauge can measure a bore of 35~50mm..
  • A package including a dial bore gauge and measuring tip..
  • Made of aluminum alloy material ,rust and corrosion resistant..
  • High accuracy ,the resolution of the gauge is 0.01mm..
Check Stock

Telescoping Gage Set, 6Pcs Precision Telescopic Gauge 8-150mm Adjustable Inner Diameter Gauge Micrometer Measuring Tools T-Bore Hole Gauge

  • 【Advantage】 Assist in quick checking of holes, slots and recess up to 6 inch deep. The ends of both contact are head treated steel and precision ground to a radius allowing proper clearance on the smallest hole the gauge will enter..
  • 【Bore Gauge Material】 The bore gauges are made of carbon steel with chrome plating on the surface. Self centering telescoping gauge has high rigidity, good wear resistance. Telescoping Gage Set has nickel-plated finished and good side arc so that the product has a long service life..
  • 【Bore Gage Packing】 Total 6Pcs cylinder bore gauges in a ethylene plastic bag, range: 5/16" - 6" (8mm to 150mm), (1 gage: 5/16 - 1/2" range x 4.20" overall.
  • 1 gage: 1/2 - 3/4" range x 4.40" overall.
  • 1 gage: 3/4 - 1-1/4" range x 4.40" overall.
  • 1 gage: 1-1/4 - 2-1/8" range x 5.85" overall.
  • 1 gage: 2-1/8 - 3-1/2" range x 5.85" overall.
  • 1 gage: 3-1/2 - 6" range x 5.85" overall)..
  • 【Scope of Application】 Telescopic spring piston in the hole (or groove), can conduct inner diameter detection, used with micrometer or caliper, with knurled locking device..
  • 【Unique Design】 The spring tension of bore measuring tool ​gives uniform contact pressure, can detect the inner diameter in a hole (or groove).Spring of telescopic gauge loads with....
Check Stock

Dial Bore Gauge Set 50-160MM Diameter Indicator Measuring Engine Cylinder Tool Kit 0.01 Accuracy Inner Diameter Scale with Carrying Box for Internal Sizes Measuring

  • DESIGNED FOR: The bore gauges are used to measure internal dimensions of work pieces by comparative method, allowing for more efficient and trouble-free repairs. Made of quality metal material, this dial bore gauge is durable to use..
  • 50-160MM MEASURE RANGE: These series bore gauges are equipped with a good guiding protective bridge which can be self-centering exactly and reliably, and measuring range is 50-160mm. Easy to measure, and with high accuracy, which is 0.01..
  • GOOD GUIDING PROTECTIVE BRIDGE: These series bore gauges are equipped with a good guiding protective bridge which can be self-centering exactly and reliably, for fast and accurate measurements..
  • SIMPLE TO OPERATE: The moveable anvil on one side and an interchangeable on another side , which serves for setting the bore diameters, a dial bore gauge's speed and accuracy can save a lot of time..
  • EASY TO CARRY: The inner diameter dial gauge kit is equipped with a portable case, which can be put in the case after using, easy to carry and is not easy to be lost..
Check Stock

Anytime Tools Micrometer Set and Dial Bore Gauge 0.7\-6\/0.0005\ Deep Engine Hole Cylinder Measurement Gage

  • Bore Gauge: Measures bore to 10" deep, Range 0.7" to 6" diameter. Accuracy: 0.0005" with Crisp Precision Graduations. Includes gage and interchangeable contact points..
  • Bore Gauge: Carbide tip on measuring plunger. Dial indicator contains jeweled bearings, ABS storage case included.
  • Micrometer Set: Includes 6 Premium Quality Micrometers with measuring ranges: 0-1.
Check Stock

Real Avid Bore Boss 12GA - Clean Storing Pull Through Bore Snake Bore Cleaning System Red

  • SINGLE PASS CLEANING SOLUTION FOR YOUR 12 GAUGE SHOTGUN: Flip, clip, feed, pull. The 32-inch cable works for cleaning your Remington, Benelli,....
  • GET A GRIP AND EASILY PULL WITH THE ERGONOMIC HANDLE: The Bore Boss pull through kit has an ergonomic grip that helps you comfortably pull the....
  • SEE YOUR CALIBER AND PROTECT THE BRUSH AND MOP: The storage case has large caliber labels so you can id your cleaning supplies. Plus, the case keeps....
  • QUICKLY CLEANS FOULING FROM YOUR BORE: when you pull out your Bore Boss it is neatly wrapped up to ensure you don't spend time untying knots so you....
  • SNAKES DON'T COMPARE: Add the Bore Boss to your list of favorite 12 gauge accessories. It is a portable, compact, quick clean field tool that is an....
Check Stock

MidTen Laser Bore Sight 12 Gauge Green Bore Sight Laser Boresighter with 3 Sets of Batteries

  • High Accuracy and Strong Brightness - 12 gauge green laser bore sight is more penetrating than a red boresighter, reaching an aiming range of approximately 15-100 yards on sunny or foggy days. The 12 gauge bore sight laser allows you to zero in quickly and reduce ammo waste..
  • High Temperature and Low Temperature Resistance - 12GA bore sight can be used normally between -10 ℃ and 40 ℃..
  • Suitable Size - Fit a 12GA chamber, specific caliber..
  • Long-Lasting Battery Life - The package contains 3 sets of upgraded batteries (9 LR44 batteries), and each set of batteries last 2 hours. The bore sight doesn't contain a switch, the laser automatically "turns on" when the battery is installed, and "turns off" only when the battery is removed. Please remove the battery after use..
Check Stock

MOOSUN 30 Series Torque Converter Driver Clutch 3/4' Bore Go Kart for Comet 219552 5957

  • This 3/4″ Torque Converter is a direct replacement kit for the most popular Comet TAV2 go-kart torque converter 30 series. It fits all engines with a 3/4″ Straight Crankshaft. Replaces Comet, Also Fits Manco Go Karts. Small engine Torque Converter clutches are heavily used in go karts, mini bikes, and lawn mowers..
  • Replacement for Go Karts 30 series Engine Comet Manco, 3/4″ bore designed for 6.5hp 212CC engines. Recommended engine: 2HP-8HP.
  • Featuring 6″ diameter with 3/4″ Bore, 3/16″ Key way. Interchanges with part numbers 219552A 30 Series Torque Converter Driver Clutch. With fine workmanship, this clutch can function well exactly as same as the original one..
  • This driver clutch is designed to work with a belt and driven pulley assembly. It is produced by the sophisticated technology. This clutch will help you get more power out of your small engine by reducing engine load..
  • Made of high quality iron material,which is lightweight, portable, sturdy, durable, maximum torque, wear-resisting and fast heat dissipation. It is the combination of elegance and easy to use, firmly and securely, guaranteeing the safety of your car..
Check Stock

Fuel Test Kit with 1 Reusable Tester for E85, Gasoline, Race Gas, Ethanol, Ethanol-Free Fuel Test

  • 8PCS Professional Engine Cylinder Compression Tester Kit Automotive Tool Gauge,Cylinder Compression Gas Engine pressure test kit.
  • Checking Compression On Petrol Engine Quickly And Accurately，The gauge readings assist to diagnose if there are following problems: valve sticking, carbon build-up, cracked cylinder head or defective main gasket, poorly seated or worn piston rings, burned or damaged piston..
  • Completed Kit Comes With Adapters For Most Applications，There are 16" long flexible extension hose with 4 sizes (10mm 12mm 14mm 18mm) selectable brass adapters in the engine compression test kit,.
  • Pressure release button on the side of the tester helps with easy pressure release, 3" gauge with dual color scale..
  • The engine cylinder compression test tool kit can be widely used for most type and depth spark plug well. If you have motorcycle car truck ATV mower and any other vehicles with gasoline or gas engine, and you are a professional on repairing vehicles, you can try this kit. Please note, this cylinder compression test gauge is not suitable for most diesel engine, because the range of the gauge is only 0-300PSI, which is much lower than most diesel engine compression..
Check Stock

Hoppe's 24033VD Viper Boresnake, 20 Gauge

  • Bore snake Viper includes 33 percentage more scrubbing power over the original with a 3Rd brush.
  • Hoppe's 20 Gauge shotgun Viper, clam bore snake with den.
  • Bore snake Viper includes a bore guide for easier Insertion.
  • Convenient new case for easy storage and Transport.
Check Stock