LCGP 800ml Cooling Catch Bottle Aluminum Radiator Coolant Tank Black Overflow Oil Catch Tank for Universal Car
- OVERFLOW OIL CATCH TANK: Improve the cooling efficiency of the water tank. Save the cooling systems of your car. And keep the engine within the operational temperatures to improves its performance..
- MATERIAL&SIZE: The radiator coolant tank is made of high quality T6061 aluminum, and anodized polished. These make the radiator coolant tank more durable and anti-corrosive. And the volume of the cooling catch bottle is 800ml, height 8.27”, bottom diameter is 2.96”, the length of hose is 39.37”..
- Application: Our coolant overflow tank bottle can fit for most vehicle. It’s used in the cooling system of your car to save the cooling system from rust. Also protects the necessary components from oil..
- WORKING PRINCIPLE: When the engine works, the coolant in the radiator will sealed through the pressure cap and flows through the hose into our cooling catch bottle. And when the radiator cools, the coolant in the cooling catch bottle recycle back into the radiator..
- INSTALL AND WARRANTY: Install the bottle in the car’s pipe, away from the heat source, connect the bottle to the radiator with a hose. We provide this overflow oil catch tank have 1-year warranty. Our customer service will try our best to help you..
Check Stock957E10883 Fordson/Ford Dexta Tractor Coolant Water Temp Gauge for Dexta & super Dexta+
- ...first slow down, then drive the car to the roadside, do not to shut down the engine, because the high water temperature will cause the piston, steel wall, cylinder, crankshaft and other temperatures to be too high, and the engine oil will become thin Loss of lubrication.
- CAUSES OF EXCESSIVE TEMPERATURE: Insufficient coolant and reduced coolant leakage will cause the water temperature to rise. At this time, you should check whether there is leakage of cooling liquid.
- there is a problem with the cooling fan. The cooling fan will cause the water temperature to rise, and the heat cannot be transferred to the antifreeze in time to affect the heat dissipation, resulting in a temperature increase.
Check StockRadiator Overflow Tank 2L Universal Coolant Overflow Tank Aluminum Radiator Overflow Tank Visible Coolant Level Radiator Expansion Tank Used To Prevent Coolant Leakage Coolant Recovery Tank
- 1.[Coolant Reservoir Tank For Car Engine Maintenance]: Universal overflow resivior can be used as an exhaust gas engine oil pot and an overflow pot....
- 2.[ Radiator Rreservoir Tank With Simple Working Principle ]When the pressure of the coolant in the radiator exceeds the set value of the pressure....
- 3.[ Coolant Overflow Tank With A Wide Range Of Applications ]: The radiator overflow tank is highly compatible and compatible with most cars. Please....
- 4.[ High-quality and easy-to-install Radiator Overflow Tank ]: The coolant overflow tank is made of aluminum and is very durable. It can also prevent....
- 5.[ Large Capacity & Accurately Designed Radiator Expansion Tank ]: The capacity of the coolant overflow tank is 2L, which is twice that of the....
Check Stock6.0L Powerstroke Oil Cooler Flush Kit,Blue Anodize Adapter Flush Adapter for Ford 2003 2004 2005 2006 2007 2008 2009 2010 Diesel
- With our 6.0L Power Stroke Oil Cooler Flush Kit, the oil cooler can be backflushed in less than an hour. By directing the water flow in the opposite direction of normal travel, contaminants are removed and, in most cases, the cooler is restored to new effectiveness..
- No need to remove the plant cooling manifold. Coolant enters the cooler from the oil cooler, and when disturbed, the quick connection hose between the oil cooler and the cooler will usually start to leak, resulting in rewinding. Our device will not interfere with the original connection..
- It is advisable to regularly monitor the Delta T (difference between oil temperature and coolant temperature) while operating the engine under load. If the temperature difference exceeds specification we recommend performing an oil cooler flush. Careful attention to this detail can prevent thousands of dollars of engine and fuel system damage. In the case of a cooling system that has experienced extreme neglect,even a new cooler can become restricted by contaminants quite quickly..
- Package Includes 1x Flush adapter and 1x aluminum anodized adapter.Feel free to contract us if you meet any problem with the product. We'll reply you within 24 hours..
Check StockReplacement Coolant Reservoir Tank - Compatible with Freightliner Vehicles - Cascadia, Century Class, Columbia, Coronado, FLD020SD, M2 106, M2 112 - Replaces 525263005, A05-25263-006, A0533118000
- Replacement Coolant Reservoir Tank - The coolant tank contains coolant fluid that is discharged from the cooling system attached to the engine. Pressure builds up and released when the coolant is hot and expanding through the radiator and when the engine cools down, the excess fluid flows back into the radiator from the coolant tank of your freightliner vehicle..
- Compatible Replacement for Freightliner Vehicles - 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019 Freightliner Cascadia | 08, 09, 10, 11 Century Class | 10, 11, 13, 14, 15 Columbia | 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 Coronado | 2011 FLD120SD | 2014, 2016 M2 106 | 2008-2019 M2 112 |. If you are experiencing leaks, low level of coolant and overheating engine then you may have a problem with your coolant reservoir tank..
- Replaces Part# A05-25263-006, 525263005, A0525263005, A0525263007, A0533118000, 603-5203 commonly found on popular Cascadia, Century Class, Columbia and Coronado vehicles including models 08, 09, 10, 11, 12, 13, 14, 15, 16 17, 18, 19. The coolant reservoir tank can easily be located on the engine bay mounted on the engine near and connected to the radiator..
Check StockDiesel Water Parking Heater Hydronic Heater 5KW 12V Boat Caravan Motorhome Truck Camper Trailer Remote Control Diesel Water Heater Kit
- PROTECT YOUR ENGINE ➤ The water heating type parking heater uses automobile coolant to exchange heat, preheats the engine and the cab, solves the problem of difficult engine startup at low temperature, greatly reduces air-cooled wear caused by low temperature startup, and extends engine life by more than 30%..
- LESS FUEL PREHEATING ➤ Compared with cold-start engine preheating, the water heating parking heater preheating consumes less fuel. In the cold winter, you can warm up the engine and cab before getting on the car to drive away the severe cold. Improve the driving environment and no longer need a warm store..
- FULL INSTALLATION SET ➤ 1 x Water Parking Heater, 1 x Auto Switch And Remote Control (Batteries Not Included), 1 x Water Pump, 1 x Wiring Harness, 1 x Tube, 1 x Oil Pump, 1 x Pump Holder, 1 x Fuel Filter, 1 x Oil Tube, 1 x Big Elbow, 1 x Small Elbow, 1 x Air Inlet Hose, 1 x Exhaust Pipe, 1 x Exhaust Silencer, 1 x Hose Holder, 1 x Cross, 1 x Air Filter, 6 x Short Pipe, 1 x Oil Extractor, 12 x Hose Clamps, 12 x Small Hose Clamp, 5 x Screwiv, 4 x Screw, 1 x Iron Stent..
- TECHNICAL PARAMETERS ➤ Material: Metal &....
Check Stockkweiny Pneumatic Fluid Extractor for Automotive Brake and Clutch and Power Steering Fluid
- ...d out: The oil extractor works by sucking the oil from the crankcase through a thin hose inserted in the dipstick opening then you pump repeatedly to create a vacuum that pulls the hot oil into an easy-to-carry container with 6L capacity. You can pump any type of fluid, like engine oil, transmission, radiator coolant, water, and more without much effort and mess..
- Multi-size Hoses: There are four size hoses for your choice if you buy a Kemimoto oil vacuum pump extractor: 2.5mm/ 4mm/ 6mm/ 8mm to apply different engine or machine..
- Wide Application: Fluid pump extractor evacuates fluids directly from dipstick tubes.
- At 6 liters of capacity, this manual oil and fluid pump can be used as an oil change pump extractor and fluid transfer pump on most light and heavy duty vehicles, tractors, garden gas mowers, marine engines, small aircraft engines, industrial gear boxes, and coolant and hydraulic systems, etc..
- Perfect Tool for DIY'er: This handy manual oil pump extractor is the perfect design for professional and DIY mechanics to remove the oil easily and quickly and a pour spout is included to help empty containers for recycling the oil..
- Product Feature: This 6L fluid capacity hand pump is made of HDPE durable material and a shut-off valve for mess-fre....
Check StockMotorcraft VC8 Diesel engine coolant additive - 1 Pint(473 ml)
- In all heavy-duty, diesel engine cooling systems equipped with green-colored Motorcraft Premium Engine Coolant meeting Ford Specification ESE-M97B44-A.
- In all heavy-duty, diesel engine cooling systems equipped with yellow-colored Motorcraft Premium Gold Engine Coolant meeting Ford Specification WSS-M97B51-A1.
- Designed to replace additives depleted between coolant change-outs.
- Now dyed yellow to eliminate engine coolant color change when mixing.
Check StockRAVENOL J4D2092 HJC FL22 Coolant Antifreeze Concentrate (Hybrid Japanese Coolant) (5 Liter)
- Please see Product Description regarding the California Proposition 65 Warning. This coolant/antifreeze contains ethylene glycol and a bittering agent..
- Specially formulated to meet and exceed Japanese coolant antifreeze specifications. High-quality corrosion additives for optimal corrosion protection and compatible with elastomers used in modern automotive engines.
- Used and tested in accordance with engine coolant antifreeze systems.
- Excellent for use in light metal engines providing good reserve alkalinity and protection.
- Note: See “Product Information/Technical Details/OEM Part Number” section in this product listing for oil specifications, oil quality standards, part numbers, and OEM approval details and descriptions for this product.
Check StockRAVENOL J4D2091-1 HJC FL22 Coolant Antifreeze Premix (Hybrid Japanese Coolant) (1.5 Liter)
- Please see Product Description regarding the California Proposition 65 Warning. This coolant/antifreeze contains ethylene glycol and a bittering agent..
- Used and tested in accordance with engine coolant antifreeze systems. Ready to use, prediluted, ethylene-glycol based German made coolant.
- Excellent for use in light metal engines providing good reserve alkalinity and protection.
- High-quality corrosion additives for optimal corrosion protection and compatible with elastomers used in modern automotive engines.
- Note: See “Product Information/Technical Details/OEM Part Number” section in this product listing for oil specifications, oil quality standards, part numbers, and OEM approval details and descriptions for this product.
Check StockHopkins 10704 FloTool Spill Saver Measu-Funnel (1, 2 PACK)
- Unique design: different from other ordinary funnels, our high-end coolant funnels have a special rotary switch, which can be closed by turning it gently to effectively prevent overflow or bubbles..
- The Coolant Filling Kit Can Deliver Fluids Such as Radiator Coolant and Oil To Any Vehicle, the Long Burp Funnel Prevents Spills and Trapped air During Refills After a Coolant Flush..
- The multipurpose funnel kit includes:5 Adapters, 4 Filler Caps, Two 45° elbows, Two 5“ Extender and a High Quality Transparent Antifreeze Funnel Make The Kit..
- The longer extension rod is designed for hard to reach areas, and can be placed on the radiator cap at any angle in combination.The thread reinforcement design can ensure that the liquid can not leak under extreme environment..
- Multi Purpose: the Spill Free Funnel is Very Suitable for Engine Flushing, Coolant Pressure Tester Kit, and Even Radiator Flushing.
- The Coolant Filling Kit Has a Common Spare Part for USA and Foreign Vehicles..
Check StockThree Bond High Viscosity Fast-Set Liquid Gasket Maker TB1217H
- Sets to form an elastic body which is not affected by vibration or impact.
- Maintains a stable rubber body over an operating temperature range of -76°F to 482°F.
- Highly resistant to engine oil, various chemicals and coolant.
- Use on the water pump, oil pan, valve cover, engine head, fuel pump, thermostat housing, oil pump and intake manifold.
Check StockPQY 10 Row AN10-10AN Stacked Plate Oil Cooler 6AN 8AN Adapter Universal Engine Transmission Aluminium Alloy
- For Universal Fitment. May require some modifications to fit certain vehicles.For modified street vehicles which are driven hardly with racing track use..
- 10 row oil cooler reduces coolant temperature and extend engine life..
- Cool down engine oil, transmission and rear-differentials like a radiator.Keep the oil temperature low to prevent damage, or even seizure of the engine.Improve lubrication and power performance. Maintain oil viscosity. Save fuel..
- Can used to connect the 8AN / 6AN braided fuel line hose end. Inlet / Outlet Size: AN-10 Oil Capacity: 0.24L.
- Package include:1x 10Row Stacked Plate 10AN Oil Cooler,2x 10AN Female to 8AN Male Fitting Adapter,2x 10AN Female to 6AN Male Fitting Adapter.
Check Stock